8BitDo M30 RR Manual


Læs gratis den danske manual til 8BitDo M30 RR (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om 8BitDo M30 RR, eller vil du spørge andre brugere om produktet?

Side 1/8
For PS4 controller
1. Insert Retro Receiver into console and then press the pairing button (the LED will rapidly blink)
2. Press and hold the Share and PS buttons until the lightbar begins to strobe quickly in double.
3. Wait until your Retro Receiver's LED is solid blue and the controller's lightbar stay on.
4. For next connection only need to press PS button and wait until receiver's LED is solid blue.
MODE START
DPAD
Z
A
Y
C
B
X
For PS3 controller
1. Download and Run 8BitDo Retro Receiver Tools on your PC available for Mac and PC.
2. On your Retro Receiver, hold down the pairing button and connect it to your MAC/PC via USB.
3. Connect your PS3 controller to MAC/PC via USB.
4. Once your Retro Receiver and PS3 controller are both connected via USB, click the "Pair" button
in the soware.
5. Once pairing is complete, you can insert your Retro Receiver into your console.
6. Now press the PS button on your PS3 controller.
7. Wait until your Retro Receiver's LED is solid blue and the controller's #1 LED stay on.
8. To re-sync aer powering your console down, begin from step 6.
Retro Receiver
for original Genesis & Mega Drive
• 6 button mode <=> 3 button mode switching can be achieved by pressing button on the mode
controller for 3 seconds. LED on the receiver will blink twice to indicate the change
For Xbox One S/X Bluetooth controller
1. Insert Retro Receiver into console and then press the pairing button (the LED will rapidly blink).
2. Press HOME button to turn on your Xbox One S/X Bluetooth controller and then press bind
button.
3. Wait until both LEDs on the Retro Receiver and controller stay solid.
4. Retro Receiver will auto-reconnect to the controller when you turn back on the controller with
the HOME button only.
MODE START
DPAD
ZX
A
Y
C
B
MODE START ZX
A
Y
C
B
For 8Bitdo controllers
SN30 Pro/N30 Pro2/SN30 v2:
1. Press B + START to turn on your SN30 Pro controller.
2. Press both PAIR buttons on the receiver and controller to sync them.
3. Both LEDs on the receiver and controller will become solid when they are successfully paired.
N30 Pro:
1. Press POWER to turn on your controller.
2. Press both PAIR buttons on the receiver and controller to sync them.
3. Both LEDs on the receiver and controller will become solid when they are successfully paired.
N30/F30/SN30/SF30/Zero:
1. Press START to turn on your controller.
2. Press both PAIR button on the receiver and SELECT on the controller to sync them.
3. Both LEDs on the receiver and controller will become solid when they are successfully paired.
N30 Arcade Stick:
1. Press X + START to turn on your arcade stick.
2. Press both PAIR button on the receiver and arcade stick to sync them.
3. Both LEDs on the receiver and controller will become solid when they are successfully paired.


Produkt Specifikationer

Mærke: 8BitDo
Kategori: Ikke kategoriseret
Model: M30 RR

Har du brug for hjælp?

Hvis du har brug for hjælp til 8BitDo M30 RR stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret 8BitDo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer