Adj FREQ 16 Strobe Manual

Adj Ikke kategoriseret FREQ 16 Strobe

Læs gratis den danske manual til Adj FREQ 16 Strobe (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Adj FREQ 16 Strobe, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

FREQ 16 Strobe Introduction

©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 2

Rev. 2/15

Unpacking: Thank you for purchasing the FREQ 16 Strobe by Ameri-

can DJ®. Every FREQ 16 Strobe has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The FREQ 16 Strobe is part of American DJ’s continu-

ing pursuit for creating high quality affordable intelligent fixtures. The

FREQ 16 Strobe is a revolutionary 16-zone LED strobe. The unit has

4 operating modes; Sound Active (with adjustable sound sensitivity),

Show Mode, Manual Mode, or DMX Control. This unit can be used as

a stand alone xture, or in a Master/Slave conguration. This fixture is

suitable for theaters, studios, retail stores, and other similar locations.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ®.

PLEASE recycle the shipping carton when ever possible.

FREQ 16 Strobe Safety Precautions

©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 4©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 3

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 18 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

• Built in Microphone

• 4 DMX Channel Modes: 1 Channel Mode, 2 Channel Mode, 16

Channel Mode, & 18 Channel Mode

• 12 Show Modes

• 4 Operating Modes - Sound Active, Show Mode, Manual Mode,

and DMX Control

• Sound Sensitivity Adjustable

• UC3 Remote Control Compatiable (Not Included)

• Power Cord Daisy Chaining. See page 18.

FREQ 16 Strobe Warranty Registration

FREQ 16 Strobe Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

FREQ 16 Strobe General Instructions

The FREQ 16 Strobe carries a 2 year (730 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) number. If the unit is under warranty you must provide a copy

of your proof of purchase invoice. Please contact American DJ® cus-

tomer support for a R.A. number.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

FREQ 16 Strobe Installation

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	FREQ 16 Strobe

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj FREQ 16 Strobe stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj FREQ 16 Strobe Manual

14 Oktober 2025

Adj ElectraPix Bar 8 Manual

12 September 2025

Adj Vizi Beam RX2 Manual

12 September 2025

Adj Par Z150 RGBA Manual

12 September 2025

Adj Wolfmix W1 MK2 Manual

29 August 2025

Adj Fog Storm 1700HD Manual

19 August 2025

Adj Nucleus Pro Manual

19 August 2025

Adj Vizi CMY 16RX Manual

19 August 2025

Adj Micro Galaxian Manual

19 August 2025

Adj WiFLY Bar RGBA Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea UTRUSTA 105.808.24 Manual

14 Oktober 2025

Ikea MÅLERÅS 405.113.58 Manual

14 Oktober 2025

Black Hydra GAMMA 625X Manual

14 Oktober 2025

Ikea LILLHULT 006.177.00 Manual

14 Oktober 2025

Ikea LENDA 106.149.37 Manual

14 Oktober 2025

Eikon EK600GC Manual

14 Oktober 2025

Ikea LILLHULT 206.201.36 Manual

14 Oktober 2025

Photoflex MultiDisc Manual

14 Oktober 2025

Ikea BÄSINGEN 105.959.86 Manual

14 Oktober 2025

Ikea BORRBY 606.088.54 Manual

14 Oktober 2025