Adj WiTech8 Wireless Manual

Adj Ikke kategoriseret WiTech8 Wireless

Læs gratis den danske manual til Adj WiTech8 Wireless (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Adj WiTech8 Wireless, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Introduction:

Congratulations and thank you for purchasing the American DJ WiTECH8. The WiTECH8 was designed for DJs,

Bands, Bars/Clubs, and Moblie Entertainers that want easy On/Off control of up to 8 fixtures. The WiTECH8

has one 1/4” output jack for UC3 control and 8 power jacks. The WiTECH8 is compact and light-weight, and

can be mounted on truss, lighting stands, wall, or ceilings. The WiTECH8 control has a transmitting distance

of 325ft. or 100 meters. With the wireless remote you are able to control Stand By (Black Out), Function, and

Mode for each output. Please refer to your units user manual for its UC3 functions and controls.

Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to

answer any question should you encounter problems during your set up or initial operation. You may also visit

us on the web at www.americandj.com for any comments or suggestions. For service related issue please con-

tact American DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing

so will void your manufactures warranty. In the unlikely event your unit may require service please contact

American DJ customer support.

The WITECH8 carries a 1 Year (365 days) limited warranty. Please fill out the enclosed warranty card to vali-

date your purchase. All returned service items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. If the unit is under warranty you must provide a copy of your

proof of purchase invoice. Please contact American DJ® customer support for a R.A. number. For additional

warranty info please visit our website.

***THIS SYSTEM HAS BEEN SYNCHRONIZED AT THE FACTORY AND IS READY FOR USE RIGHT OUT OF THE BOX***

If your system becomes unsychronized you can follow the steps below to resync.

WiTECH8 SET UP AND SYNCH: When using the WiTECH8 please refer to your units user manual for its UC3 functions and

controls. Please see other side for the WiTECH8 controls and functions.

1. Using a 1/4” to 1/4” stereo cable, connect one end of the cable to the 1/4” jack on the back of your desired UC3

compatiable fixture and the other end of the cable to the 1/4” jack located on the WiTECH Receiver. Turn on the Receiver.

2. Once you have your unit(s) connected to the WiTECH Receiver press the SET UP (7) button located on top of the Receiver,

the RF SIGNAL LED (8) will begin to flash.

3. Once the RF SIGNAL LED (8) is lit, press any button on the WiTECH8 Controller. Once you press any button, the RF

SIGNAL LED (8) will turn off. This lets you know that the set up process is complete and you can begin controlling your

connected unit(s).

4. You can also use the connected unit as a master unit, and connect up to 7 more slave units. Please see your units user

manual for master-slave configuration. Use any unused power jacks on the WiTECH8 to plug in and provide power for your

slave units.

Specifications:

Voltage................................................................................................................................120V/60Hz

Frequency.............................................................................................................................433.9Mhz RF (Radio Frequency)

Wireless Transmitting Distance............................................................................................................................325ft. /100M

Max. Load..............................................................................................................................5A per Channel, 15A Total at a time

Breaker.................................................................................................................................................................16A

WiTECH Dimensions...................................................................................................................16.75 (L) x 4.25” (W) x 2.5” (H)

WiTECH Weight......................................................................................................................................................6lbs / 2.7Kg

CONTROLS AND FUNCTIONS -

WiTECH8 RECEIVER:

1. Power Jacks - 8 power jacks provide power to 8 units.

2. Power Switch - This switch powers on the WiTECH8 Receiver.

3. Antenna - Receives the signal from the WiTECH8 Controller.

4. 1/4” Output Jack - Connect your desired compatiable fixture to this jack.

5-6. LED Outputs - These LED’s will glow indicating activity. Example, the Stand By LED will glow

when the unit is in Stand By mode.

7. Set Up Button - Press this button to set up the receiver.

8. RF Singal LED - This LED will glow when the Set Up button has been pressed.

9. Power Cord - Plug this power cord into a compatible voltage power source to power the

WiTECH8.

10. Fast Lock Hook - This bracket is used to hang the WiTECH8

from trussing. See picture at the side.

WiTECH8 CONTROLLER:

11. RF Signal LED - This LED will blink when a command from the controller has been sent to

the receiver.

12. All Off Button - Hold this button for at least 5 seconds to turn off all the fixtures that are

plugged into the power sockets.

13. All On Button - Hold this button for at least 5 seconds to turn on all the fixtures that are

plugged into the power sockets.

14. Stand By Button - Puts the fixture connected to the 1/4” jack into blackout mode.

15. Function Button - This button lets you select different functions. Please see the user manual

of your connected fixture for UC3 programs and functions.

16 Mode Buttons - This button lets you select different functions. Please see the user manual

of your connected fixture for UC3 programs and functions.

17. Power Jacks On/Off Button - This button activates and deactivates all of the power jacks.

Hold this button for at least 5 seconds to activate the power jacks.

WiTECH8 RECEIVER

WiTECH8 CONTROLLER

Produkt Specifikationer

Mærke:	Adj
Kategori:	Ikke kategoriseret
Model:	WiTech8 Wireless

Har du brug for hjælp?

Hvis du har brug for hjælp til Adj WiTech8 Wireless stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Adj Manualer

Adj Pinspot LED Quad DMX Manual

15 Oktober 2025

Adj Micro Royal Galaxian II Manual

15 Oktober 2025

Adj Quad Scan LED Manual

15 Oktober 2025

Adj WiFLY Chameleon Manual

15 Oktober 2025

Adj Inno Spot LED Manual

15 Oktober 2025

Adj Mega Go Flood Bar Manual

14 Oktober 2025

Adj WiTech8 Wireless Manual

14 Oktober 2025

Adj FREQ 16 Strobe Manual

14 Oktober 2025

Adj ElectraPix Bar 8 Manual

12 September 2025

Adj Vizi Beam RX2 Manual

12 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Genesis GLVC08B Manual

15 Oktober 2025

Victory Deputy 112 Manual

15 Oktober 2025

IFM EVCA78 Manual

15 Oktober 2025

Emos P54214 Manual

15 Oktober 2025

Samsung RA18FHSK Manual

15 Oktober 2025

Manfrotto MLTSA3301B Manual

15 Oktober 2025

AmpliVox Mega Hailer SW6822 Manual

15 Oktober 2025

Sonnenkönig Slim E 2000 Manual

15 Oktober 2025

Emos DCAW23 Manual

15 Oktober 2025

Parkside PTKS 2000 H5 Manual

15 Oktober 2025