Advantech MIO-5375C3-P9A1 Manual

Advantech Ikke kategoriseret MIO-5375C3-P9A1

Læs gratis den danske manual til Advantech MIO-5375C3-P9A1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Advantech MIO-5375C3-P9A1, eller vil du spørge andre brugere om produktet?

Side 1/4
MIO-5375 Startup Manual 1
Before you begin installing your board, please make sure
that the following items have been shipped:
• 1 x MIO-5375 SBC
• 1 x SATA cable 30cm (P/N: 1700006291)
• 1 x SATA power cable 35cm (P/N: 1700031583-01)
• 1 x USB2.0 cable 20cm (P/N: 1700030406-01)
• 1 x Audio cable 20cm (P/N: 1700019584-01)
01)
• 2 x COM RS-232 cable 20cm (P/N: 1700031582-01)
• 1 x Cooler (heatsink) (P/N:1970004884T001/
1970004794T001)
• 1 x Startup manual (P/N: 2046537500)
• 1 x Mini jumper (10pcs package)
• 1 x Screw kit (2 x sets screws and post for M.2 device & 4
setsofscrewsandstand-o󰀨)
• 1 x DeviceOn package
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
General
• CPU:
- Intel
®
Core i7-1185G7E (Quad-Core, 4.40 GHz)
- Intel
®
Core i5-1145G7E (Quad-Core, 4.10 GHz)
- Intel
®
Core i3-1115G4E (Quad-Core, 3.90 GHz)
• Systemmemory: Dual Channel/SODIMM DDR4-3200
MT/s, up to 64 GB
• BIOS: AMI EFI 256Mbit
• Watchdogtimer:65536 level, 0~65535 sec
MIO-5375 3.5 MI/O-Compact SBC, 11th Gen.
Intel
®
Core U-series (i7/i5/i3/Celeron
®
)
Startup Manual
• TPM2.0
• iManager3.0:Yes
• Expansioninterface:
- M.2:
1 x E-Key 2230 (PCIe x1, USB2.0)
1 x B-Key 3042 (USB2.0) w/Nano-SIM
1 x M-Key 2280 (PCIe p1-x4 Gen.4 for PCIe SSD), optional
SATA
- MI/O Extension connector: 4 x PCIe x1, 1 x PCIe x4,
1 x USB 2.0, LPC, SMBus, Line-out, and 12V/5V Power
supply
• Battery:Lithium 3 V/210 mAH
• Audio:SupportsHighDenitionAudio(HD),line-in,line-
out, and Mic-in
Display
• Controller:
- Intel
®
SoC integrated for HDMI/DP/Type-C display output
- 48-bit LVDS display output
• Maximumresolution:
- LCD:
LVDS dual channel 48-bit up to 1920x1200
Optional: eDP 1.4 up to 4096x2304@60 Hz
- HDMI/DP:
1 x Port HDMI 2.0 up to 4096x2160@60 Hz
1 x Port DP 1.4a up to 4096x2160@60 Hz
- USB Type-C:
1 x USB3.2 Gen. 2x2 20 Gbps, supports DP1.4a via alt.
mode
• Multipledisplay:Four simultaneous displays via 48-bit
LVDS/eDP+HDMI+DP+Type-C
EthernetInterface
• Speed:10/100/1000 Mbps
• Controller:GbE1 - Intel i219, GbE2 - Intel i210-AT
• Connector:RJ45 x 2
I/O
• InternalI/O:1 x SATA 6 Gb/s, 2 x USB 2.0, 2 x
RS232/422/485, 8-bit GPIO, Inverter, SMBus, CANBus
I2C*, HD audio, LVDS, and system fan.
• RearI/O: 4 x USB 3.2, HDMI, DP, USB type-C, 2 x RJ-45,
1 x DC-Jack (*optional).
• MI/Oexpansion:4 x PCIex1, 1 x PCIe x4, USB 2.0, LPC,
SMBus, line-out, and 12 V/5 V power supply.
• Powerconnectortype:Default support 2 x 2 pin ATX
power connector, DC jack is supported upon by request.
MechanicalandEnvironmental
• Dimensions(LxW): 146 x 102 mm (5.7 x 4 in)
• Powersupplytype:ACPI support for ATX only
• Powerrequirements: Vin: 12 V-24 V +/- 5%
Specications(Cont.)PackingList
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/
This manual is for MIO-5375.
Part No. 2046537501
Printed in China
2nd Edition
Feb. 2024
Specications
2 MIO-5375 Startup Manual
• Powerconsumption:
- Max: i7-1185G7E: 43.31 W (12 V)/46.78W (24 V)
- Typical: Idle mode in Windows 10.
i7-1185G7E: 16.56W (12 V)/19.2W (24 V)
• Operatingtemperature: 0 ~ 60 °C (32 ~ 140 °F)
The board has a number of connectors and jumpers that
allowyoutocongureyoursystemtosuityourapplication.
The table below lists the function of each of the jumpers and
connectors.
Jumpers
Label Function
J3
AT mode /Load BIOS default
VDD1
LCD Power
Connector
Label Function
CN11 Power Input
DIMM1 SO-DIMM 9.2mm
DIMM2 SO-DIMM 5.2mm
Battery1 RTC Battery
CN4 CAN BUS
CN5 Front Panel
AUDIO1 Audio
CN8 I2C
COM1 COM1
COM2 COM2
COM3 COM3
COM4 COM4
CN7 GPIO
LAN1 RJ45_2x1_W/XFMR&LED
BL1 Inverter Power output
LVDS1 48 bit LVDS
EDP1 eDP/MIPI DSI
HDMI1 HDMI
DP1 DP
TYPEC1 TYPEC
M2_1 M.2 E-key
M2_2 M.2 M-key
M2_3 M.2 B-key
SIM NANO SIM
J3:ATmode/LoadBIOSdefault
Function JumperSetting
Auto Power On
(1-2)
Reserve
(3-4)
Short: Load BIOS default
Open: Normal
(5-6)
Toloadfactorydefaults,dothis:
Step1:Powero󰀨
Step 2 : Remove the Jumper (3-4) and add to (5-6), then
power on.
BIOS will load factory defaults (does not clear time or clear
CMOS), a message will remind user to shut down system
and restore Jumper (3-4)
Step 3 : Power on again.
If you want to Clear CMOS, remove battery (battery 1).
System will pop up a message...wait for 3 seconds. RTC
time will clear but keep the BIOS settings.
VDD1:LCDPower
Function JumperSetting
+3.3V
(1-3)
+5V
(3-5)
+12V
(3-4)
Caution! The computer is provided with a battery-powered
real-time clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturers instructions.
Specications(Cont.)
JumpersandConnectors(Cont.)
JumpersandConnectors


Produkt Specifikationer

Mærke: Advantech
Kategori: Ikke kategoriseret
Model: MIO-5375C3-P9A1

Har du brug for hjælp?

Hvis du har brug for hjælp til Advantech MIO-5375C3-P9A1 stil et spørgsmål nedenfor, og andre brugere vil svare dig