Advantech PCA-6108P6 Manual


Læs gratis den danske manual til Advantech PCA-6108P6 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Advantech PCA-6108P6, eller vil du spørge andre brugere om produktet?

Side 1/5
PCA-6108P6 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCA-6108P6 startup manual 2002610824
2. 3-pin ATX connector cable 1700030500
3. Screw M4*6L (15 pcs) 1939000410
4. 2-year quality warranty card 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
html (Acrobat is a trademark of Adobe)
Standard Functions
• PICMG 1.0 slots: PCA-6108P6 supports PICMG 1.0 CPU
boards
• ISA slots: One ISA slot
• 32-bit PCI: Five 32 bit/33 MHz PCI slots
• PICMG/PCI slot: One PICMG/PCI slot
Mechanical and Environment
• Dimension: 260mm x 200mm
• Power supply voltage: +12 V, +5 V, -12 V, -5 V, +3.3 V,
+5 VSB
• Power requirements: Refer to the CPU board, add-on
card, and peripherals
• Operating temperature: 0 ~ 60° C
• Weight: 0.398 kg
PCA-6108P6 Backplane: 8-slot BP for 8-slot Chassis, 1 ISA, 5 PCI,
1 PICMG, 1 PICMG/PCI
Startup Manual
The board has a number of jumpers that allow you to con-
figure your system to suit your application.
The table below lists the function of each of the jumpers and
connectors.
Jumpers and Connectors
Connectors
Label Function
PICMG1~PICMG2 PICMG1.0 CPU board slot
ISA3 ISA slot
PCI1~PCI3 32 bit / 33MHz PCI slot
SPCI1~SPCI3 32 bit / 33MHz PCI slot
VAT1 AT power connector
VATX1 ATX power connector
VBIG1 BIG 4-pin connector
VKB1~VKB3 KB-In or KB-Out connector
HCN1
PS-On, to CPU card for ATX
power signal
HCN3 +5 V and +12 V fan connector
Jumpers
Label Function
HCN1 ATX/AT Mode Selection
AT Mode
Remove default jumper
and connect 3-pin ATX
connector cable
ATX Mode
J3 PCI Bridge Voltage Selection
Setting 5V voltage to PCI slot
(default)
Setting 3.3V voltage to PCI
slot
123
3 6 9
1 4 7
3 6 9
1 4 7
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the PCA-6108P6 Series.
Part No. 2002610824
Printed in China
5th Edition
July 2014
Jumpers and Connectors


Produkt Specifikationer

Mærke: Advantech
Kategori: Ikke kategoriseret
Model: PCA-6108P6

Har du brug for hjælp?

Hvis du har brug for hjælp til Advantech PCA-6108P6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Advantech Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ANCEL

ANCEL BM200 PRO Manual

3 November 2025
ANCEL

ANCEL BM200 Manual

3 November 2025
JSAUX

JSAUX SP0210 Manual

3 November 2025
EtherWAN

EtherWAN SmartE Manual

3 November 2025
Hikvision

Hikvision DS-TMG022 Manual

3 November 2025
Hendi

Hendi 229583 Manual

3 November 2025
Witt

Witt HP 18 Manual

3 November 2025
Physa

Physa PHY-WU_03 Manual

3 November 2025