Advantech PCM-26D2CA Manual

Advantech Ikke kategoriseret PCM-26D2CA

Læs gratis den danske manual til Advantech PCM-26D2CA (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Advantech PCM-26D2CA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

PCM CE- -26D2CA

2-Ports Isolated CANBus mPCIe, CANOpen, DB9

Startup Manual

Before installation, please ensure that the following items

have been included in your shipment:

mPCIe(USB signal) card controller with CAN x 1

DB9 I/O x 2 plate with iDoor x 1bracket

Wafer- - x 2to DB9 cable

Startup manual x 1

Warranty card x 1

If any of the above items are missing or damaged, contact

your distributor or sales representative immediately.

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support services, please visit our support

website at:

http://www.advantech.com.tw/eservice

This manual is for the PCM- - .26D2CA CE

Part No.

Edition 1

June 2023

The following tables and figures show the pin assignments

of the connector on the bracket to the modular If card. you

see two ports or above, it will use the same pin- definition

as this one.

CAN Port

CAN_L

GND

CAN_H

PCM module with iDoor technology supports the following

Advantech platforms:

Automation computers - UNO series

Panel PC - TPC series

Modular - IPC MIC series

See the following page for installation in TPC embedded panel

computers and UNO embedded computers.

PCM- - 26D2CA CE Startup Manual 1

Packing List

PIN Assignment

Installation

You can set the terminator resistor by jumper setting if

necessary to match impedance.

PIN# of JP1/ JP2

Status

Value of Terminator

Resistor

PIN 1-2

Open Mode

PIN 2-3 (Default)

Close Mode

120 Ohms

The support documentation can be accessed from https://

www.advantech.com/support.

2 - - PCM 26D2CA CE Startup Manual

Remove the screws from the back plate and lift it off.

Remove the screws from the blanking plate.

Insert the PCM Module through the open slot.

Secure the PCM Module with the screws you removed

from the blanking plate.

Jumper Settings

Embedded Panel Computer Installation

Produkt Specifikationer

Mærke:	Advantech
Kategori:	Ikke kategoriseret
Model:	PCM-26D2CA

Har du brug for hjælp?

Hvis du har brug for hjælp til Advantech PCM-26D2CA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Advantech Manualer

Advantech IPC-510 Manual

23 August 2025

Advantech IDS-3112P-60XGA1 Manual

23 August 2025

Advantech ADAM-4015 Manual

23 August 2025

Advantech WISE-4060-B Manual

22 August 2025

Advantech HPC-7484 Manual

22 August 2025

Advantech ADAM-3968/50 Manual

22 August 2025

Advantech ADAM-6050-D1 Manual

22 August 2025

Advantech WISE-3310 Manual

22 August 2025

Advantech ADAM-3014 Manual

22 August 2025

Advantech DS-980 Manual

22 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

JILONG JL097205NPF Manual

14 September 2025

Brandson 306570 Manual

14 September 2025

Nedis PIM30012EGY Manual

14 September 2025

Neutrik SCD-W Manual

14 September 2025

BSS Audio FCS-926 Manual

14 September 2025

Brandson 303842 Manual

14 September 2025

AMX DGX-O-DXF-MMS Manual

14 September 2025

Brandson 304024 Manual

14 September 2025

JILONG JL097109NPF Manual

14 September 2025

Brandson 303403 Manual

14 September 2025