AEG PN 5000 E Manual

AEG Borehammer PN 5000 E

Læs gratis den danske manual til AEG PN 5000 E (55 sider) i kategorien Borehammer. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om AEG PN 5000 E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/55

FIN

RUS

PNEUMATIC 5000 E

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlig at læse og opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

Kullanøm kølavuzu

Lütfen okuyun ve saklayin

Èíñòðóêöèÿ ïî

èñïîëüçîâàíèþ

Ïîæàëóéñòà, ïðî÷òèòå è

ñîõðàíèòå íàñòîÿùóþ

èíñòðóêöèþ

ENGLISH PNEUMATIC 5000 E

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right

choice!

Nominal power 1050 W. . . . . . . . . . . . . . . . . . . .

No-load speed 0–300 min-1

. . . . . . . . . . . . . . . . . . .

Speed under load max. 250 min-1

. . . . . . . . . . . . . .

Percussion rate 3200 min-1

. . . . . . . . . . . . . . . . . . .

Drilling capacity in

Concrete max. 50 mm. . . . . . . . . . . . . . . . . . . . .

concrete with core drill max. 150 mm. . . . . . . .

Weight 8,9 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . .

JPlease pay attention to the safety instructions in the attached leaflet!

JDust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

JAppliances used at many different locations including open air must be connected

via a current surge preventing switch.

JAlways wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

JSawdust and splinters must not be removed while the machine is running.

JDo not pierce the motor housing as this could damage the double insulation (use

adhesives).

JAlways disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

JKeep mains lead clear from working range of the machine. Always lead the cable

away behind you.

JAlways use the auxiliary handle, even if the machine has a safety clutch since this

safety clutch only engages when the machine blocks with a jerk.

JWhen drilling in walls ceiling, or floor, take care to avoid electric cables and gas or

waterpipes.

Typically the A-weighted noise levels of the tool are:

Sound pressure level = 93 dB (A).

Sound power level = 106 dB (A).

Wear ear protectors!

Measured values determined according to EN 50 144.

Typically the weighted acceleration is : 5,0 m/s

Measured values determined according to EN 50 144.

The pneumatic hammer can be universally used for hammer drilling and chiselling.

Do not use this product in another way as stated for normal use.

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Use

Mains

connection

Produkt Specifikationer

Mærke:	AEG
Kategori:	Borehammer
Model:	PN 5000 E

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG PN 5000 E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Borehammer AEG Manualer

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

AEG B2E 900 RD Super Torque Manual

5 Oktober 2022

Borehammer Manualer

Nyeste Borehammer Manualer

FERM HDM1033P Manual

5 Oktober 2022

Makita HR3541FC Manual

5 Oktober 2022

Makita HR2010 Manual

5 Oktober 2022

Black And Decker KD860 Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

Hitachi DH 24DVC Manual

5 Oktober 2022

FERM HDM1028 Manual

5 Oktober 2022