AENO AGH0001S Manual

AENO Varmeapparat AGH0001S

Læs nedenfor 📖 manual på dansk for AENO AGH0001S (76 sider) i kategorien Varmeapparat. Denne guide var nyttig for 5 personer og blev bedømt med 4.0 stjerner i gennemsnit af 3 brugere

Download PDF

Side 1/76

AENO Premium Eco Smart Heater

Installation and Operation Manual

Models AGH0001S (-IT, -CH, -UK, -SA), AGH0002S (-IT, -CH, -UK, -SA), AGH0003S (-IT, -:

CH, -UK, -SA), AGH0004S (-IT, -CH, -UK, -SA), AGH0005S (-IT, -CH, -UK, - ) SA

(including the above models with “ A” ending)-

Version 2.0.1 August, 3| 202

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 3 of 76

Introduction

AENOTM heater is designed for heating residential and office spaces.

The present Manual contains a detailed description of the device, as well as instructions

for its installation and operation.

Copyrights

The AENOTM trademark is owned by ASBIS GROUP OF COMPANIES (hereinafter

referred to as the ASBIS). All other similar trademarks and names, as well as logos and

other symbols are the property of their respective owners *.

All materials under AENOTM tradename contained therein are protected in accordance

with international and local laws including Acts on Copyrights and related rights.

Any reproduction, copying, publication, as well as further distribution or public display

of material contained in the present document (whether in full or in part) shall not be

allowed until an appropriate permission of the copyright owner is obtained.

Any unauthorized usage of materials contained herein may lead to civil liability and

criminal prosecution in accordance with applicable laws.

Any eventual mentioning of other company names and equipment in the present

document is made solely for the purpose of clarifying and describing the device

operation and shall not infringe on the third party’s intellectual property rights.

* Google Play and Google Home are trademarks of Google Inc.; App Store is the registered trademarks of

Apple Inc.; Yandex is the registered trademark of YANDEX LLC.; Amazon Alexa is the registered trademark

of Amazon Technologies, Inc.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 4 of 76

Responsibility and Technical Support

This document was prepared in accordance with all necessary legal requirements and

contains detailed and complete information on operation and maintenance of the

device. The information is current as of the date indicated in th document. Strict is

adherence to the instructions in this manual will ensure correct, safe and reliable

operation of the device.

Both this manual and Quic Start Guide are an integral part of the device and the k

should always be available to the user for reference.

ASBIS reserves the right to modify the device and make corrections or changes to this

document without prior notice of the user, and shall not be responsible for any

potential negative consequences which may arise from the use of an outdated version

of the document, as well as for any possible technical and/or typographical errors,

either omitted or accidental, or any related damage that may result from the document

transfer or the use of the devices.

In case of any discrepancies between language versions of this document, the Russian

version of this User Manual shall prevail.

ASBIS shall make no guarantee with respect to any data contained herein including

but not limited to the device merchantability and fitness for a particular purpose.

If you have any technical questions, please contact your local ASBIS representative or

the technical support department at aeno.com. The most common issues are

described in Section 7 (Troubleshooting) of this document.

Please visit aeno.com/documents to download the latest version of this manual.

User information including personal data is protected from unauthorized access and

disclosure in accordance with GDPR requirements. You can read the Privacy Policy at

aeno.com/privacy-policy.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 5 of 76

Conformance to Standards

The device is CE certified and complies with requirements of the following

Directives of the European Union:

• 2014/35/EU Low Voltage Directive;

• 2004/30/ Electromagnetic Compatibility Directive;EU

• 2014/53/EU Radio Equipment Directive;

• 2009/125/EU Ecodesign Directive.

Tested by TUV NORD in accordance with Directive 2014/35/EU.

The device complies with the UKCA marking requirements for selling the

device in the UK

The device has passed all procedures of assessments established in

Technical Regulations of the Customs Union and conforms with standards

of the Customs Union

The device complies with the requirements of Restriction of the Use of

Certain Hazardous Substances (RoHS) in Electronic and Electrical

Equipment (2011/65/EU Directive) including requirements of 2015/863/EU

Directive

The national conformity mark of the Ukraine indicating that the device

meets requirements of all applicable technical regulations

The crossed-out trash can symbol is used to label electrical and electronic

equipment, and indicates its separate collection.

The symbol is given in accordance with the Directive 2012/19/EU on Waste

Electrical and Electronic Equipment (WEEE and indicates that this )

equipment requires separate collection at the end of its life and must be

disposed of separately from unsorted household waste.

To protect the environment and human health, please dispose of used

electrical and electronic equipment according to approved safe disposal

guidelines

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 6 of 76

Simplified Declaration of Conformity

ASBISc hereby declares that the device described in the present document complies

with Directive 2014/53/EU. The full text of the Declaration of Conformity can be found

at the following address: aeno.com/userfiles/files/Certificates/CE/Heater.pdf.

Limitations and Warnings

Prior to installation and operation of the device, the User shall carefully read and

understand information contained herein.

WARNING!

Do not cover the heater to avoid overheating.

WARNING!

Do not install the heater directly under a plug socket.

WARNING!

Do not use the heater if the glass panels are damaged.

ATTENTION!

The warnings, precautions, and instructions contained in this document may not

contain every possible hazardous situation. Use common sense when using the

device.

Warning symbols and icons

Hot surface. The risk of burns in the case of contact with heated surfaces.

Do not touch heating panel until completely cooled down and do not allow

the power cable to contact the heating panel

To avoid overheating, do not cover the device or dry clothes on it

The device is intended for indoor use only

IP44

Degree of protection of the device casing that is protection against the

ingress of solid objects larger than 1 mm in size, as well as drops and

splashes falling from any angle

General warning icon

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 7 of 76

The device is Class II for protection against electric shock (double

insulation)

Do not repair the device on your own as this may result in electric shock or

other injury and will void the manufacturer's warranty

Do not expose the device to liquids

The eco-label symbol on the package indicating its recyclability

Recyclable corrugated cardboard packaging

No moving parts in the design of the device prevents the formation of dust

Indication that the device may be broken or damaged if not handled

carefully

Indication that the device must be protected from moisture

Toxic substances are not available in the materials from which the device is

made

Function of maintaining the set temperature (for remote control)

The device is certified according to the standards applicable in the

countries of sale

Packaging is RoHS & REACH compliant and contains no prohibited

materials

Innovative design

Producer of raw materials for packaging was certified by the Forest

Stewardship Council (FSCTM)

Producer of raw materials for making packaging confirms responsible

forest management

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 8 of 76

Safety Operation Rules

1. Please read these instructions carefully. The device shall be installed and used as

described in this manual only. Any other use not specified therein may cause fire

and other hazards, as well as injury to persons.

2. The device is intended for operation in a room with an ambient temperature of

0 °C... +40 °C.

3. The device not intended for use in explosive, commercial, industrial or is

agricultural areas and facilities it may only be used in residential areas as an –

additional source of heating.

4. During operation of the device, its power cord plug shall always fit tightly into the

outlet, otherwise it may lead to overheating of the outlet.

5. Keep children and pets away from the area of installation of the Eco Smart

Heater, as contact with the device in operation may result in burns.

6. The device may only be operated when it is properly mounted on brackets or

special legs as supplied within the scope of delivery.

7. The included hooks and dowels are designed to mount the unit on a reinforced

concrete wall only. When installing on another type of wall, you should choose

the appropriate fasteners that are suitable for both the wall and the device

weight of more than 10 kg. The manufacturer shall not be liable for any damage

resulting from the use of unsuitable fasteners.

8. The installation area shall be level, i.e. without any bends or warps (flat vertical or

horizontal surface). If the device is in the wrong position when connected to the

source of power, it will emit short beeps.

9. Do not bend the device or otherwise use force for wall installation using screws.

10. When moving the device, you may only hold it by brackets on its back. Do not

move the device by the glass panel while it is switched on or hot.

11. If the device is connected to the mains, it is strongly recommended to ensure

quick and easy way to disconnect it from the source of power .

12. Do not mount the device directly under or on top of an electrical socket!

13. Do not allow the power cable to come into contact with the heating panel!

14. To avoid supply network overloading and the risk of fire, do not use an extension

cord to connect the device to the power source, or connect the device to the

mains socket along with other household appliances.

15. Do not touch heating panel during operation of the device. the

16. The power cord must not touch the heat-radiant panel. Do not cover the power

cord with rugs, runners, or similar coverings, or run it under furniture or

appliances, or where you can fall over . it

17. Do not use the device in the case of damage or cracks, or any signs of damage to

any other parts thereof, e.g. the power cable.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page 9 of 76

18. If the power cable is damaged, it may only be replaced by an authorized service

center or other authorized party.

19. Do not drop, throw, disassemble or attempt to repair the device on your own.

Stop using the device, it is has fallen.

20. Do not expose the device to direct sunlight or moisture, oils, chemical or other

organic liquids, or vibrations.

21. Do not use the device in a combustible, explosive and/or dusty environment, as

well as in areas where corrosion of its materials is possible.

22. Never place the heater in areas where it could fall into a bathtub or other

container of water.

23. Do not dry clothes or any other items with the device, and do not place it less

than 1 meter away from any fabrics, decorative objects or other flammable

objects. WARNING! Violation of these recommendations is at the user's risk, and

the manufacturer shall not be liable for any damages resulting from this

violation.

24. The device shall be operated at least 1.5 meters away from people and animals.

25. Do not operate the device on carpets and heated floors!

26. If the device is not used (heating mode switched off) for a long period of time, it

shall be disconnected from the source of power.

27. To avoid an unpleasant “burnt” smell, it is recommended to keep the device clean

and free of dust accumulation.

28. To clean the device, use a water-dampened cotton cloth followed by a dry streak-

free cloth cleaning. Do not clean the device until it is switched off and de-

energized. Do not use cleaning agents or detergents to clean the device.

29. The device is not intended for use by children under 12 years, or by persons of

limited physical, sensory or mental capabilities who have no adequate

experience or knowledge in using the device, unless they are supervised or

instructed by a person responsible for their safety.

30. Do not use the device in areas with people who are unable to leave the room on

their own or who are not under the constant supervision of a person responsible

for their safety.

WARNING!

Any damage to the device as a result overturning or falling will void the

manufacturer's warranty.

For any issues on installation, configuration or operation of AENO devices,

please contact our technical support team at support@aeno.com or fill out the

form at aeno.com/service-and-warranty

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 10 76

Table of Contents

Introduction ............................................................................................................................................................................. 3

Copyrights ................................................................................................................................................................................ 3

Responsibility and Technical Support .................................................................................................................. 4

Conformance to Standards .......................................................................................................................................... 5

Simplified Declaration of Conformity ................................................................................................................... 6

Limitations and Warnings ............................................................................................................................................ 6

Table of Contents ............................................................................................................................................................... 10

1 General Description and Specifications ......................................................................................................... 12

1.1 General Purpose ...................................................................................................................................................... 12

1.2 AGH0001S-AGH0002S Model Appearance ......................................................................................... 13

1.3 AGH0003S-AGH0005S Model Appearance ........................................................................................ 15

1.4 Button Functions and Indication ............................................................................................................... 17

1.5 Venting Hole ............................................................................................................................................................. 18

1.6 Types of Electrical Outlets and Plugs ..................................................................................................... 19

1.7 Technical Specifications ..................................................................................................................................20

1.8 Scope of Delivery ................................................................................................................................................... 21

1.9 Packaging and Labeling ................................................................................................................................ 24

1.9.1 Labeling Rules and the Date of Manufacture ........................................................................... 24

1.10 Space Heating Technologies ......................................................................................................................25

2 Installation and Operation ..................................................................................................................................... 27

2.1 First Installation and Setup ........................................................................................................................... 28

2.1.1 Unpacking and Preparing for Installation/Mounting .......................................................... 29

2.1.2 Preparing the Installation area ........................................................................................................... 29

2.1.3 Floor Installation (Option 1) .................................................................................................................... 30

2.1.4 Horizontal Wall Mounting (Option 2) ............................................................................................. 33

2.1.5 Vertical Wall Mounting (Option 3) .................................................................................................... 36

2.1.6 Wall Mounting with 4 Hooks (Additional Fixation) .............................................................. 39

2.1.7 Hardwiring Option ...................................................................................................................................... 40

2.1.8 Ceiling Mounting ......................................................................................................................................... 40

2.2 Initial Power On ..................................................................................................................................................... 41

2.3 Manual Control ..................................................................................................................................................... 42

2.3.1 ructions for AGH0001S-AGH0002S Models Inst ....................................................................... 42

2.3.2 Instructions for AGH0003S-AGH0005S Models ..................................................................... 43

2.4 Remote Control via the AENO App ....................................................................................................... 44

2.4.1 App Installation ............................................................................................................................................. 44

2.4.2 Registering a New Account ................................................................................................................ 44

2.4.3 Logging into an Existing Account ................................................................................................... 45

2.4.4 Eco Smart Heater Activation Process .......................................................................................... 45

2.4.5 Control Panel of the Eco Heater ....................................................................................................... 50

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 11 76

2.4.6 Operating Mode Selection .................................................................................................................... 50

2.4.7 Setting the Heater Schedule ................................................................................................................ 51

2.4.8 Setting the Countdown Timer ........................................................................................................... 53

2.4.9 Energy and Power Statistics ............................................................................................................... 53

2.4.10 Changing Settings .................................................................................................................................... 54

2.4.11 Additional Settings .................................................................................................................................... 55

2.4.12 Scenarios and Automations ............................................................................................................... 58

2.5 Child Lock Mode .................................................................................................................................................. 63

2.6 Adjusting and Turning Off the Buttons LEDs ................................................................................ 64

2.7 Remote Control Via Voice Assistants ................................................................................................... 64

3 Maintenance and Repair ......................................................................................................................................... 65

4 Warranty Obligations ................................................................................................................................................ 66

4.1 AENOTM Service Centers ................................................................................................................................. 67

4.2 Warranty Service Procedure ...................................................................................................................... 67

4.3 Limitation of Liability ....................................................................................................................................... 67

5 Storage, Transportation and Disposal of Devices ................................................................................. 69

6 Other Information ......................................................................................................................................................... 71

7 Troubleshooting ............................................................................................................................................................ 72

8 Glossary ................................................................................................................................................................................ 74

Figures and Tables

Figure 1 Appearance (AGH0001S-AGH0002S) –.......................................................................................... 13

Figure 2 Buttons, ports and indicators (AGH0001S-AGH0002S) –................................................. 14

Figure 3 Appearance (AGH0003S-AGH0005S) –.........................................................................................15

Figure 4 Buttons, ports and indicators AGH000 S-AGH000 S – ( 3 5 )................................................ 16

Figure 5 Package contents –.................................................................................................................................... 23

Figure 5 Examples of heater installation* –................................................................................................... 28

Figure 6 Mounting on legs (on the floor) –..................................................................................................... 30

Figure 7 Installation of the brack –ets ............................................................................................................... 34

Figure 8 Preparing of the wall (horizontal mounting) –....................................................................... 35

Figure 9 Preparing the wall (vertical mounting) –................................................................................... 37

Figure 10 Vertical installation (wall mounting) –........................................................................................ 38

Table 1 Power button functions –........................................................................................................................... 17

Table 2 Power button LED indication –............................................................................................................. 17

Table 3 – Additional button functions (AGH000 S-AGH0003 5S) ........................................................ 18

Table 4 Basic Technical Specifications –.......................................................................................................... 20

Table 5 Typical problems and solutions –........................................................................................................72

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 12 76

1 General Description and Specifications

1.1 General Purpose

The AENO TM heater is an electric heating device with a combined heat output designed

for primary, supplementary and local heating of domestic and other premises

(apartments, offices, trade enterprises, gyms, educational institutions, catering

enterprises, etc.).

Key benefi of the heaterts AENO TM are as follows:

• Combined infrared and convection heating;

• Connection via Wi-Fi (2.4 GHz);

• Low power consumption;

• Automatic maintenance of desired temperature in the room;

• Ability to set the maximum temperature of the heating panel;

• Electronic thermostat and tilting sensor;

• Large heat-emitting surface area;

• Possibility of leg installation, as well as horizontal or vertical wall mounting;

• Option to mount the device on the ceiling ( is available only after connecting It

the device to the mobile app);

• Low dust content in the air due to lower convection (thermal movement of air

volumes);

• Remote control via a mobile app or voice assistants, as well as manual control;

• Noiseless operation;

• Comfortable microclimate in the room;

• Installation of legs and brackets without tools;

• Elegant glass surface;

• The use of non-toxic materials in production;

• Minimum size of the control unit and matching accessories with the color of the

heating panel;

• Winner of two prestigious Red Dot Design Awards. the

Here and further below, any reference to AGH0001S-AGH0002S models means all

configurations of such two models, and AGH0003S-AGH0005S means all

configurations of such three models (See par. 1.9.1 below).

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 13 76

1.2 AGH0001S-AGH0002S Model Appearance

Figure 1 Appearance (AGH0001S-AGH0002S) –

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 14 76

Figure 2 Buttons, ports and indicators (AGH0001S-AGH0002S) –

❶

Heating panel of the device that is emitting heat to warm the room

❷

Hole in the panel for a mounting bolt for screwing legs or wall brackets

❸

Electronic module for the heater control which includes a signaling

component (piezo siren) to audibly notify users of the device statuses

❹

LED button for switch the heating mode on and off

❺

Power cable to connect the heater to the mains socket

❻

Sensor that measures the ambient air temperature and ensures accuracy

when maintaining the required heating temperature

❶

❹

❺

❻

❸

❷

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 15 76

1.3 AGH0003S-AGH0005S Model Appearance

Figure 3 Appearance (AGH0003S-AGH0005S) –

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 16 76

Figure 4 Buttons, ports and indicators AGH000 S-AGH000 S – ( 3 5 )

❶

Heating panel of the device that is emitting heat to warm the room

❷

Hole in the panel for a mounting bolt for screwing legs or wall brackets

❸

Electronic module for the heater control which includes a signaling

component (piezo siren) to audibly notify users of the device statuses

❹

Control panel consisting of the following buttons (from top to

bottom ):

• LED display;

• SMART mode button;

• Power button;

• Temperature increase button;

• Temperature decrease button.

❺

Power cable to connect the heater to the mains socket

❻

Sensor that measures the ambient air temperature and ensures accuracy

when maintaining the required heating temperature

❶

❹

❺

❻

❸

❷

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 17 76

1.4 Button Functions and Indication

Table 1 Power button functions –

Action

Description

Press and hold the power button for

no more than 3 seconds

Switching the device from Off to On mode

and vice versa

Press and hold the power button for

more than 3 seconds

Resetting the fault condition (blinking red)

and switching to the Off mode

Press and hold the power button for

4 to 10 seconds

Switching to activation mode in the AENO

mobile app

Press and hold the power button for

more than 10 seconds

Factory r eset

Press the power button 5 times in 4

seconds

Manual disabling of the Child Lock mode

Table 2 Power button LED indication –

Color

Status

Description

Blue

The device is connected to the mains and activated in

the mobile app, but the heating mode is switched off

Flickering

The device is connected to the mains, but not

activated in the mobile app, and heating mode is

switched off

Green

The device is connected to the mains and activated in

the mobile app, and the heating mode is switched on

Flickering

The device is connected to the mains, but not

activated in the mobile app, and heating mode is

switched on

Purple

Blinking fast

The device is connected to the mains, and the process

of activation in the mobile app was started

Red

Blinking

The device is connected to the mains, but an error has

occurred (Incorrect orientation, safety mechanism

actuation, etc.)

Blinking fast

(3 times)

Factory reset process was initiated

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 18 76

Color

Status

Description

Yellow

The device is connected to the mains, and the

temperature maintenance mode is on (for remote

control via the mobile app only)

Off

The device is not connected to the mains, or a power

failure occurred

Blinking means that the LED is on for 500 ms, and then is off for 500 ms.

Blinking fast means that the LED is on for 100 ms, and then is off for 100 ms.

Flickering means that the LED is on for 3,000 ms, and then is off for 300 ms.

Table 3 – Additional button functions (AGH000 S-AGH0003 5S)

Button

Action

Description

SMART mode button

Single press

SMART mode enabling or disabling

Temperature increase

button

Single press

Increase the desired room

temperature by 1 °C

Temperature decrease

button

Single press

Decrease the desired room

temperature by 1 °C

1.5 Venting Hole

The venting hole in the heater body is required to ensure proper air circulation and is

not a defect in the device.

Its location may differ for some models of heaters.

WARNING!

It is forbidden to block the venting hole of the device.

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 19 76

1.6 Types of Electrical Outlets and Plugs

Since electrical outlet standards may vary from country to country, there are several

versions of the AENO TM heater plugs depending on the country of sale.

(without ending)

- IT

- CH

- UK

- SA

Plug type E/F:

Plug type L:

Plug type J:

Plug type G:

Plug type M:

For E, F outlets:

For L outlets:

For J outlets:

For G outlets:

For M outlets:

Voltage: 230 V, Frequency: 50 Hz

Before using the device, please make sure that the power cord plug is compatible with

the user s electrical outlet. ’

If for any reason, the user purchased the device with an incompatible plug, then a

suitable adapter must be used for connecting it to the mains (not included in the

delivery).

NOTE

Advice on purchasing the required adapter can be obtained from any electrical

store, or from our technical support service at support@aeno.com

Also, before using the device, please make sure that the power plug does not fall out of

the user s electrical outlet and is also securely fixed in it. ’

ATTENTION!

Do not use the device if the power plug is not firmly seated in the outlet, as this

may cause the outlet to overheat, and risk a fire may occur.

ATTENTION!

Questions and/or issues with electrical outlets should only be handled by a

qualified electrician. Do not use excessive force when inserting the plug into the

outlet, and do not attempt to repair/modify the outlet or the plug on your own.

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 20 76

1.7 Technical Specifications

Table 4 Basic Technical Specifications –

Parameter

Value

Model

AGH0001S AGH0005S (See sub-par. 1.9.1 below) –

Communication Standard

Wi- (IEEE 802.11b/g/n), dBm (~100 Fi ˂20 mW))

Operating frequency

2,400-2,483. GHz 5

Integration

Google Assistant, Amazon Alexa

Server

Cloud

Type of heater

Micathermic, double-sided

Heating types

Infrared radiation 75 % –

Convection 25 % –

IR angle

Up to 300° (depending on installation area)

IR wavelength

95-100 µm

Room area

30 m 2 max (depends on the room insulation)

Allowable temperature

adjustment range for the

heating panel

60 °C +125 to °C

Power

Power supply voltage:

220V to 230 V (AC), 50 Hz

Permissible voltage range:

180-253 V (AC)

Rated current:

3.0 A (no more than 0.01 A in standby mode)

Rated power:

700 W (for AGH0001S-AGH0002S models)

760 W (for AGH0003S-AGH0005S models)

(not more than 2 W in standby mode)

Types of protection

Current protection: 6.3 A

Voltage protection: 260 V

Panel temperature protection: + 135 °С

Protection Class

IP44

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 21 76

Parameter

Value

Electronic gyroscope

Tip-over shutdown

Operating temperature

0 °C +40 °Cto

Operating humidity

up to 75 RH (without condensation) %

Storage temperature

- 20 °C to +70 °C

Storage humidity

up to 75 RH (without condensation) %

Installation options

On a flat horizontal surface (horizontal floor installation,

ceiling mounting ).

On a flat vertical surface (horizontal or vertical wall

mounting).

Designed for indoor installation only.

Case Material

Heating plate: tempered glass

Control unit: PC plastic

Color

Glossy White

Pearl Black

Noble Gray

Dimensions (L × W × H)

1000×165×417 mm (floor installation)

1000×62×365 mm (wall mounting)

Net Weight

8.7 kg (with accessories)

Warranty period

3 years

Service life

3 years

Certificates

CE, EAC, RoHS

International Red Dot

Design Award

(AGH0001S-AGH0002S)

List of awards:

1. Heating and air conditioning technologies.

2. Smart product

1.8 Scope of Delivery

The AENO TM heater comes with the following devices and accessories:

1. Premium Eco Smart Heater AENO TM – 1 pc.

2. Legs for floor installation 2 pcs. –

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 23 76

2 – Leg for floor installation*

3 Bracket for wall mounting* –

4(a) Mounting bolts* –

4(b) Screws* –

4(c) Dowels* –

5 – Template for drilling holes in the wall

Figure 5 Package contents –

* The images of accessories are for illustrative purposes only.

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 27 76

2 Installation and Operation

Before installation, the User shall select one of the following possible locations and for

the device:

• On a flat and stable horizontal surface for installation on legs;

• on a flat non-tilted vertical surface for mounting on brackets.

The User shall also make sure that the selected location meets the following

requirements :

• Availability of a power source at the place where the heater is installed;

• Acceptable location of the electrical outlet and power cable (see Limitations the

and Warnings);

• Ambient temperature is above 0 °C.

WARNING!

It is strongly recommended that the Eco Smart Heater is installed out of the reach

of children and pets, as contact with the device in operation may result in burns.

Do not use the Eco Smart Heater on carpets or near curtains or upholstered

furniture.

NOTE

It is not recommended to install the device in areas with a high level of noise and

a high-frequency interference. Reinforced concrete floors may reduce the

distance of wireless signal transmission.

See below possible installation locations for the Eco Smart Heater.

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 29 76

2.1.1 Unpacking and Preparing for Installation/Mounting

1. Unpack the heater and accessories carefully.

2. Place the device on a clean horizontal surface with the heating panel facing

down.

NOTE

It is recommended to place the device on a clean cloth surface.

3. Wipe both sides of the heating pa with a damp cloth soaked in a little water, nel

then with a dry cloth that does not leave streaks. Make sure that there are no

traces of dust and dirt on the device.

4. Prepare the installation area and install the heater according to the most

suitable option (See below).

2.1.2 Preparing the Installation area

For floor installation:

1. Only horizontal orientation is allowed when the heater is mounted on legs (See

Figure 1).

2. All types of fabrics, decorations and other flammable objects including rugs and

carpets must be kept at least 1 meter away from heater installation area.

For wall mounting:

WARNING!

Hooks and dowels supplied with the heater are designed to mount on a it

reinforced concrete wall only. When installing on a different type of wall you

should choose the appropriate fasteners.

1. The heater can be mounted horizontally or vertically on the wall (on 2 or 4 hooks).

2. All types of fabrics, decorations and other flammable objects including rugs and

carpets must be kept at least 1 meter away from heater installation area.

3. To drill holes in the wall, please use the special template supplied with the

heater.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 30 76

2.1.3 Floor Installation (Option 1)

Figure 7 Mounting on legs (on the floor) –

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 32 76

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 34 76

Figure 8 Installation of the brackets –

3. Drill 2 holes in the wall using the special paper template supplied with the device,

and screw in the hooks. then

Horizontal orientation of the template

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 36 76

5. Check that the device is securely fixed .

NOTE

During mounting, make sure that the hooks are securely tightened and oriented

strictly vertically.

2.1.5 Vertical Wall Mounting (Option 3)

Vertical orientation of the template

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 38 76

Figure Vertical installation (wall mounting) 11 –

NOTE

The option of mounting the heater with the control unit being on top is

acceptable, if the device is installed at a low height and when the location of the

electrical outlet does not prevent the heater from being quickly de-energized, as

well as the power cable does not contact the heating panel. if

NOTE

During mounting, make sure that the hooks are securely tightened and oriented

strictly vertically.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 39 76

2.1.6 Wall Mounting with 4 Hooks (Additional Fixation)

When mounting on 4 hooks, you need to drill 4 holes in the wall with a template.

Then follow the instructions for assembling the heater as outlined in par. 2.1.4 or

par. 2.1.5 above.

Hang the device on 4 hooks at a time.

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 40 76

2.1.7 Hardwiring Option

I you decide to mount the heater in the wall in such a way as to hide its power cable f to

or to embed the device in the wall, then you should understand and agree to the

following:

• The manufacturer's warranty for the device shall become void;

• The manufacturer shall not be liable for possible changes in functionality or poor

operation of the device;

• Any installation operations must only be carried out by qualified installers only

who have sufficient knowledge and skills to carry out correct and safe hardwiring

of the heater;

• When cutting the power cable, it is not allowed to cut off the temperature sensor;

• The device must be installed in such a way as to provide its adequate ventilation

and location of the temperature sensor unhidden, i.e. exposed to the room air.

2.1.8 Ceiling Mounting

If you decide to mount the heater on the ceiling, then you should understand and agree

to the following:

• Any installation operations must only be carried out by qualified installers only

who have sufficient knowledge and skills to carry out correct and safe mounting

of the heater on the ceiling;

• The manufacturer shall not be liable for possible installation errors, including but

not limited to the use of unsuitable fasteners, as well as for any loss or damage

resulting from improper installation work;

• The power cable must not come into contact with the heating surface;

• The device must be installed in such a way as to provide its adequate ventilation

and location of the temperature sensor unhidden, i.e. exposed to the room air.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 42 76

2.3 Manual Control

2.3.1 Instructions for AGH0001S-AGH0002S Models

The heater may be manually controlled with a single power button located on the

control unit of the device.

1. Press and hold the power button for no more than 3 seconds to turn it on for

heating.

2. To stop heating, press and hold the power button again for no more than

3 seconds, and the device will be switched to standby mode. the

NOTE

See Table 1 above for more information on the functions of the power button.

Please unplug the power cable from the electrical outlet in order to de-energize

the heater completely.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 43 76

2.3.2 Instructions for AGH0003S-AGH0005S Models

The heater may be manually controlled with four buttons located on the control unit

of the device.

1. Press and hold the power button for no more than 3 seconds to turn it on for

heating.

2. To stop heating, press and hold the power button again for no more than

3 seconds, and the device will be switched to the standby mode.

3. To set the desired room temperature, activate the SMART mode by pressing the

corresponding button, and then use the + and/or - button to set the desired “ ” “ “

value that will be displayed on the LED display.

NOTE

See Table 1 and Table 3 above for more information on the button functions.

Please unplug the power cable from the electrical outlet in order to de-energize

the heater completely.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 46 76

Initial activation with automatic detection

NOTE

This method can be used to activate the device in the app upon its connection to

the mains outlet for the first time.

1. After logging into your account, tap + icon in the Homethe “ ” “ ” tab.

2. Wait till the image of the heater appears in the pop-up window and tap Add . “ ”

3. Enter the -Fi network password to which the device will be connected (you Wi

can choose another network if it is of 2.4 GHz).

4. Wait for the device to be connected to the app and tap Next . “ ”

5. Specify the desired name for the heater and select the room of installation from

the list. After that, tap Done . “ ”

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 48 76

7. Specify the desired name for the heater and select the room of installation from

the list. After that, tap . “Done”

Further activation in the Manual mode

NOTE

This method can be used in all cases where the heater is in the pairing mode and

when it was not automatically detected via other activation methods.

1. After logging into your account, tap the “+” icon in the “Home” tab.

2. Select the “ ly”Manual tab at the top of the screen and then the “ ”Heater category.

3. Turn on the heater by pressing its power button once. The LED indicator light will

turn green.

4. Then press and hold the power button until the LED starts blinking purple.

5. On the screen with the connection instructions, confirm that the indicator is

blinking purple and tap Next . “ ”

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 49 76

6. Wait for the heater to be detected and tap on the "+" icon next to its name.

7. Enter the Wi-Fi network password to which the device will be connected (you

can choose another network if it is of 2.4 GHz ).

8. Wait for the device to be connected to the app and tap . “Next”

9. Specify the desired name for the heater and select the room of installation from

the list. After that, tap . “Done”

AENO TM Premium Eco Smart Heater

Installation and Operation Manual

Page of 50 76

2.4.5 Control Panel of the Eco Heater

The heater control panel is displayed if you tap on its ’s

image in the list of connected devices in the Home tab. “ ”

In the control panel the user can:

• View the current room temperature;

• Set the desired room temperature;

• Turn the device on and off and select its operating

mode;

• Set timers and view power consumption statistics;

• Change the settings.

2.4.6 Operating Mode Selecti on

There are two modes of operation available in the heater control panel: ’s

• Constant heating, where the heater is switched on and off manually by the user,

and the temperature of the room heating cannot be adjusted;

• SMART, where the room temperature is controlled by a built-in sensor. The set

value is maintained without the user, i.e. the heating element is switched on or off

as needed.

NOTE

The default setting after the heater is activated in the app for the first time is

manual operation.

You can select the operating mode only after turning on the heater. You can turn it on

manually or from the control panel by pressing the power button .

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 52 76

The following settings are available:

• Start time,

• Repetition by day of the week,

• E ing a user note that will be displayed in the list of schedules and push nter

notifications,

• Option to receive push notifications when this event starts,

• Action to be triggered by time (switching the heater on or off),

• The desired room temperature for the schedule for turning the heater on,

• The type of heating for the schedule for turning the heater on.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 54 76

• Energy consumption and power statistics diagrams for the day or month; the

• The list of heater statuses by days with timestamp of the event.

2.4.10 Changing Settings

In the Settings tab of the heater control panel, the user “ ”

can perform the following actions:

• Activate the Child Lock mode When activated, the .

heater will not respond to pressing a physical button,

and all control may be done through the app only;

• Activate the function required to install and operate the

heater on the ceiling;

• Set the desired heating temperature of the panel;

• Customize notifications;

• Choose a temperature scale;

• Adjust the brightness level of buttons or turn it off.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 55 76

2.4.11 Additional Settings

To open the additional settings screen tap icon in the upper right corner of the , the

device control panel.

In the additional settings panel, you can perform the following:

• Change the screen saver, name and the room of

installation of the device (tap next to the heater

name);

• About the device: View reference information about

the device operation;

• Scenarios and automations View scenarios where :

the device is involved;

• Third-party services: Integrate the account with

Alexa and Google Assistant services for voice control

of devices;

• Notify when the device goes offline Enable or :

disable push notifications;

• Shared access Provide access to device control : to

another account, for example, for family members;

• Create group: Unite devices to manage them as a

single group;

• Help & Support: Get information about the most

common problems and how to solve them;

• Add to home screen: Add a device shortcut to your

smartphone's home screen for quick access to the

device control panel;

• Checking the network: Launch scanning the Wi-Fi

network, its signal strength and network connection

status;

• Update device: Check and install the latest updates for the device or activate the

automatic update;

• Delete device: Remove the device from the mobile app.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 57 76

In section, tap again, and then tap the icon of the the “Shared access” “Allow Access”

desired user. The corresponding notification will appear that access has been

successfully granted.

Information about the user will be displayed in the Shared “ access” section.

Tap on the line with the added account in this section to set the validity period for the

access or to cancel sharing.

This device will appear in the granted access section of Home tab in this user the “ ”

account.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 58 76

Create Group

From the AENO app, you can manage individual devices groups of devices. To group or

devices, tap “Create group and select the desired heaters from the list. Then”, tap “ ”Save .

NOTE

Only devices of the same type can be group .ed

Then, set the desired name for the group and tap “ ”Save . The created group is displayed

in the Home tab. “ ”

NOTE

For more information on the AENO app functionality, see the corresponding

complete user manual available for downloading at aeno.com.

2.4.12 Scenarios and Automations

In the enarios tab, the user can select conditions for automation and/or create and “Sc ”

manually run scenario.

Automation is an event that starts automatically and is triggered every time the

conditions specified in it are met.

NOTE

In other words, it is an automatic scenario.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 60 76

Device status: The scenario will run when the selected event occurs. For example,

when the room temperature drops to 19°C or when the heater's power

consumption limit set by the user is exceeded.

• Tap Next at the top of the screen. “ ”

• Select one of the actions that will occur when selected condition appears:

Device status: The selected event will occur. For example, the heating type will

be changed or the panel heating temperature will increase to 100 °C.

AENOTM Premium Eco Smart Heater

Installation and Operation Manual

Page of 61 76

Select scenario: Previously created scenario or automation will run.

Send notification: The user will receive a notification via the message center.

Delay: The time delay will be set before the next action is triggered. In this case,

it is necessary to add one more action after the specified delay.

• Tap Next at the top of the screen. “ ”

• If necessary, add an additional condition and/or action by tapping + in the “ ”

corresponding block.

• Tap Save . “ ”

• Enable the created automation, if necessary.

• It can also be activated later in the Automation section. “ ”

Produkt Specifikationer

Mærke:	AENO
Kategori:	Varmeapparat
Model:	AGH0001S

Har du brug for hjælp?

Hvis du har brug for hjælp til AENO AGH0001S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat AENO Manualer

AENO AGH0001S Manual

27 August 2024

AENO Premium Eco AGH0001S Manual

7 August 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Rinnai Granada 252 Manual

9 April 2025

Breville the Smart Tilt Control BCE208 Manual

7 April 2025

Breville the Smart Heat Control BCH208 Manual

7 April 2025

Scandia Aurora Manual

3 April 2025

Teesa TSA8059 Manual

2 April 2025

Air&Me Lison Manual

26 Marts 2025

Perfect Aire 1PHW152P Manual

16 Marts 2025

Perfect Aire 1PHW153P Manual

16 Marts 2025

Emos ZAB102 Manual

13 Marts 2025

Emos ZAB103 Manual

13 Marts 2025