Aeon Labs DSC18103-ZWEU Manual

Aeon Labs Skifte DSC18103-ZWEU

Læs gratis den danske manual til Aeon Labs DSC18103-ZWEU (6 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Aeon Labs DSC18103-ZWEU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

English

GREAT BRITAIN • customer service

tel: 0845 300 9799 customerservice@clasohlson.co.uk www.clasohlson.com/uke-mail: internet:

Ver. 20140722

In-Wall Smart Energy Switch Receiver

Art.no 36-5744 Model DSC18103-ZWEU

Please read theentire instruction manual before using theproduct and then save it for future

reference. We reserve theright for any errors in text or images and any necessary changes

made to technicaldata. In theevent of technical problems or other queries, please contact our

CustomerServices.

Things to consider:

• Other wireless equipment using thesame frequency band can reduce thetransmissionrange.

• Therange of all wireless equipment depends on thetype of obstacles located between

thetransmitter and thereceiver (e.g. aconcrete wall will interfere with thesignal more than

aplasterboard wall).

If you experience problems, try thefollowing:

• Turn off any other existing wireless equipment to check whether this is thecause of

theproblem.

• Reposition thewireless equipment, shorten thedistance between thetransmitter and

thereceiver or reduce thenumber of obstacles (walls, furniture,etc.) betweenthem.

Product description

• Remote control switch for ﬂush-mounting behind in-wall appliance switches. Workswith

Zipabox Duo and other Z-wave-system products, regardless ofmake.

• Supports 2-way communications, enabling it to report thestatus of theremote controlled

device so you can see whether or not it ison.

• Measures theenergy consumption of theconnected device and reports this information back

to theZ-wave controlunit.

• Controlled by smartphone or tablet via agateway like theZipabox Duo or directly via

aseparate remote control (sold separately).

• Also equipped with abuilt-in repeater function which allows other remote receivers to more

readily receive signals by repeating thesignals it receives from thegateway or remote control.

Installation

Note: Thisswitch is designed to be hard-wired behind awall switch. Ifyou are at all unsure about

any aspect of theinstallation, let aqualiﬁed electrician undertake thework.

1. Set your Z-wave control device to learningmode.

2. Push thebutton on thefront of thereceiver to connect it to your existing Z-wave network.

Note: TheLED indicator on thereceiver will either shine steadily or be off (depending on

whether theconnected switch is off or on) if thereceiver is connected to your existing Z-wave

network. TheLED indicator will ﬂash slowly if thereceiver is connected to your existing not

Z-wave network.

3. You can also use theconnected switch, instead of pressing thebutton on thefront of

thereceiver, to connect thereceiver to your existing Z-wave network.

4. You can switch thereceiver on and off using thebutton on thefront when it is connected to

your existing Z-wave network.

5. Thereceiver is factory preset to work with a2-pole toggle switch. Holdthebutton on thefront

of thereceiver in for 6 seconds to setup thereceiver to work with apush-button switch.

Uninstallation

Set your Z-wave control device to thedevice-removalmode.

Uninstall thereceiver by switching theconnected switch on and off 10 times in quick succession

or pressing thebutton on thereceiver.

Thereset feature

Hold in thebutton on thereceiver for 20 seconds.

For more information please visitwww.aeotec.com for acomplete instruction manual.

Disposal

This product should be disposed of in accordance with local regulations.

Ifyou are unsure how to proceed, contact your local council.

Specifications

Rated voltage 230 V, 50 Hz

Load capacity 2300W/10A. Max 350 W inductive load.

Frequency 868.42 MHz

Produkt Specifikationer

Mærke:	Aeon Labs
Kategori:	Skifte
Model:	DSC18103-ZWEU

Har du brug for hjælp?

Hvis du har brug for hjælp til Aeon Labs DSC18103-ZWEU stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Aeon Labs Manualer

Aeon Labs DSC18103-ZWEU Manual

25 Oktober 2023

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025