After Later Audio Benjolin V2 Manual


Læs gratis den danske manual til After Later Audio Benjolin V2 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 63 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 32 anmeldelser. Har du et spørgsmål om After Later Audio Benjolin V2, eller vil du spørge andre brugere om produktet?

Side 1/10
BENJOLIN V2 MANUAL
Manual ision A Rev
HISTORY
The Benjolin has it s origins in a DIY kit that could be assembled in
one sitting. The kit resulted in a standalone instrument that could
be run on 9V battery power. Rob made the schematics available non ( -
commerical use for folks to expand their learnin . The instrument ) g
was o much fun that folks leveraged that schematic to port the designs
to many modular formats and additional standalone instruments. The
overall popularity resulted in officially licensed versions of the
Benjolin being made available in various formats.
DESCRIPTION
There are four main sections to the Benjolin: two oscillators, the
Rungler (stepped CV generator), and a multimode filter. The
oscillators feed data and clock into the shift register that outputs a
stepped CV voltage (via an R2R DAC) that can then be mixed back into
the oscillator creating a chaotic system that is constantly seeking s
balance. The outputs of the oscillators are then mixed into a PWM
signal that is sent to the multimode filter section.
It is highly recommended to spend some time reading the signal flow
and playing with the module. It should help you get a feel for how to
control this complicated chaos machine.
New to the Benjolin V2:
Reworked oscillator and filter sections
All levels are adjusted to eurorack standards
Two different steps modes (8/16 and 127)
Double and single clock rate
Externally clockable
External filter input with blend control
Support for the Turing Machine expanders (with Tom’s permission)
OSCILLATORS
Oscillator 1 and 2 have identical controls and inputs/outputs.
Pitch: Coarse pitch control to control the frequency of each oscillator.
Rungler: The ammount of Rungler stepped CV that is applied to each
oscillator.
CV Pitch: CV pitch input with an attenuator to control the amount of impact
on the pitch of the oscillator. The jack is normalled to the triangle output
of the opposite oscillator (OSC1 CV pitch input is normalled to the OSC2
triangle wave).
Waveform Outputs: Triangle and Square/Pulse outputs for each oscillator.
It is important to note that the oscillators sections do support v/oct.not
This might feel odd but once you play with the module it will become clear
why this is not important.


Produkt Specifikationer

Mærke: After Later Audio
Kategori: Ikke kategoriseret
Model: Benjolin V2

Har du brug for hjælp?

Hvis du har brug for hjælp til After Later Audio Benjolin V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig