AFX HOTBEAM-10R-PACK Manual

AFX Lys HOTBEAM-10R-PACK

Læs gratis den danske manual til AFX HOTBEAM-10R-PACK (34 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om AFX HOTBEAM-10R-PACK, eller vil du spørge andre brugere om produktet?

Side 1/34
GB - User Manual
F - Manuel d'Utilisation - p. 8
D - Bedienungsanleitung - S. 14
NL - Handleiding - p. 21
DMX Channel Chart - p. 28-33
Assembled in PRC
Designed by LOTRONIC S.A.
Av. Z. Gramme 9
B - 1480 Saintes
HOTBEAM-10R-PACK
CODE: 16-2006
DMX MOVING HEAD 10R 280W
LYRE DMX 10R 280W
EN 2
© Copyright LOTRONIC 2022
USER MANUAL
UNPACKING INSTRUCTIONS
Immediately upon receiving a xture, carefully unpack the carton, check the contents to ensure
that all parts are present and have been received in good condition. Notify the freight company
immediately and retain packing material for inspection if any parts appear to be damaged from
shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materi-
als. In the event that a xture must be returned to the factory, it is important that the xture be
returned in the original factory box and packing.
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk
(due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
The unit complies with CE standards
For indoor use only
3
Minimum distance between the appliance and other objects
Don't stare into the beam
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
CAUTION: Do not damage the lamps !
Prior to moving or handling the light effect, the unit MUST be SWITCHED OFF and cool
down for at least 10 minutes. The lamps are not covered by the warranty.
If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the device
switched off until it has reached room temperature.
Please read these instructions carefully, they include important information about the installa-
tion, usage and maintenance of this product.
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that
he also receives this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you
are connecting to is not higher than that stated on the bottom of the xture.
The appliance is part of class I and must exclusively be connected to an earthed mains outlet.
This product is intended for indoor use only!
To prevent risk of re or shock, do not expose xture to rain or moisture. Make sure there are no
ammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation. Be sure that no ventilation
slots are blocked.
The max. ambient temperature (Ta) is 40°C. Don’t operate the xture at higher temperatures.
The minimum distance between light output from the projector and the illuminated surface
must be more than 3 meters.
Keep a distance to any ammable objects of at least 5m.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.


Produkt Specifikationer

Mærke: AFX
Kategori: Lys
Model: HOTBEAM-10R-PACK

Har du brug for hjælp?

Hvis du har brug for hjælp til AFX HOTBEAM-10R-PACK stil et spørgsmål nedenfor, og andre brugere vil svare dig