Aiptek Music Speaker E30 Manual

Aiptek Vugge/dockingstation Music Speaker E30

Læs gratis den danske manual til Aiptek Music Speaker E30 (18 sider) i kategorien Vugge/dockingstation. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Aiptek Music Speaker E30, eller vil du spørge andre brugere om produktet?

Side 1/18
www.air2U.eu Page 1
ENMusic Speaker
Product Overview
3
4
5
1
2
9
7
8
6
10
PAIR
1. Volume down (-)
2. Bluetooth/Aux mode Indicator( )
3. Play /Pause ( )
4. Volume Up (+)
5. Stereo indicator
6. Charging indicator
7. Aux Jack (3.5mm)
8. Charging jack (Micro USB)
9. Power ON/Off
10.Pair
Charging your speaker
Before using your speakers, it is recommended to fully charge the devices to ensure optimal
performance. To charge the speakers, connect the two speakers with the dual USB cable to a USB
port from the power source (e.g. a notebook).
The speaker can be fully charged in around 3.5 hours from empty.
Note: For saving power, please turn off the power if the speakers are not in use.
Pairing the Speaker with Your Bluetooth Device
1. Turn on the Bluetooth function on your smartphone, tablet, or notebook.
2. Turn on two speakers by switching the Power button to “ON”, the blue LED of Bluetooth /AUX
( ) will flash slowly.
3. Wirelessly paring two mono speakers to become stereo speakers:
3-1. Press and hold the “PAIR” button on both speakers until the blue LED of Bluetooth /AUX
( ) and green LED of STEREO on both speakers are flashing rapidly.
3-2. Wait for a few seconds until the green LEDs (STEREO) on both speakers become steady
on. The pairing of both speakers is completed.
4. Set up master speaker and pair with mobile device:
4-1. After both speakers are paired together, press and hold the (Play/Pause ) button on one of
the speakers until the LED indicator of Bluetooth/AUX ( ) flashes blue and red rapidly to
start pairing with your mobile device.
4-2. Search or scan for available Bluetooth devices on your mobile device. The master speaker
named “air2U E30” will be found on the list. Select the speaker and to pairing. CONFIRM
This speaker becomes the master speaker identified by mobile device.
4-3. If no action is taken to confirm the paring of the master speaker and your mobile device, the
master speaker will returns to standby mode in steady green after 1 minute. The speaker will
also disappear from the Bluetooth device list. Please resume 4-1 and 4-2 to establish the
paring.
Notice
1. Please refer to the manual of your mobile device about how to activate the Bluetooth function. Key
in password “ ” if it is required during the pairing.0000


Produkt Specifikationer

Mærke: Aiptek
Kategori: Vugge/dockingstation
Model: Music Speaker E30
Bredde: 90 mm
Dybde: 90 mm
Højde: 90 mm
Vægt: 560 g
Produktfarve: Grå
Batterikapacitet: 900 mAh
Indbygget skærm: Ingen
Pakkevægt: 620 g
Pakkedybde: 226 mm
Pakkebredde: 125 mm
Pakkehøjde: 110 mm
Wi-Fi: Ingen
Bluetooth: Ja
Batteriteknologi: Lithium-Ion (Li-Ion)
Antal højttalere: 1
Udgangseffekt (RMS): - W
Antal USB 2.0-porte: 1
Hurtig start guide: Ja
Kabler inkluderet: Audio (3.5mm), USB
Bluetooth-version: 2.1+EDR
Bluetooth-profiler: A2DP
Anbefalet brug: Universel
Frekvensområde: 65 - 15000 Hz
Impedens: - ohm (Ω)
Forbindelsesteknologi: Kabel & trådløs
Lyd-output kanaler: - kanaler
LED-indikatorer: Ja
Strømkilde type: Batteri
Indbygget kortlæser: Ingen
Batterilevetid (maks.): 10 t
3,5 mm stik: Ja
Batteritype: Indbygget
AUX-indgang: Ja
Opladningstid for batteri: 4 t
klirfaktor (THD): 1 %
Produktdesign: Sfærisk
Bluetooth-område: 10 m
USB-opladningsport: Ja
Udgangseffekt beskrivelse: 5W

Har du brug for hjælp?

Hvis du har brug for hjælp til Aiptek Music Speaker E30 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vugge/dockingstation Aiptek Manualer

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer