Air King FRAK100D Manual

Air King Emhætte FRAK100D

Læs gratis den danske manual til Air King FRAK100D (12 sider) i kategorien Emhætte. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Air King FRAK100D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

SAVE THESE INSTRUCTIONS

www.airkinglimited.com

6727910 Rev. B 10-24 1 of 12

Exhaust Fan

FRAK, FRAKH, FRAKD, FRAKV

SEE DETAILS ON UL CLASSIFICATION

MARKING ON ENCLOSED PRODUCT

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN

THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY

INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL

INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should

always be followed to reduce the risk of ﬁre, electric shock and

injury to person, including the following:

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK AND INJURY TO PERSON,

OBSERVE THE FOLLOWING:

a) Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer.

b) Before servicing or cleaning the unit, switch power off at service

panel and lock the service disconnecting means to prevent power

from being switched on accidentally. When the service disconnecting

means cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK AND INJURY TO PERSON,

OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by qualiﬁed

person(s) in accordance with all applicable codes and standards,

including ﬁre-related construction.

b) Sufﬁcient air is needed for proper combustion and exhausting of gases

through the ﬂue (chimney) of fuel burning equipment to prevent back

drafting. Follow the heating equipment manufacturer’s guideline and

safety standards such as those published by the National Fire Protection

Association (NFPA) and the American Society for Heating, Refrigeration,

and Air Conditioning Engineers (ASHRAE), and the local code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

CAUTION: FOR GENERAL VENTILATING USE ONLY.

DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE

MATERIALS AND VAPORS.

d) Ducted fans must always be vented to the outdoors.

e) This unit must be grounded.

f) To avoid motor bearing damage and noisy and/or unbalanced impellers,

keep drywall spray, construction dust, etc. off power unit.

g) Read all instructions before installing or using exhaust fan.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSONS, DO NOT USE REPLACEMENT

PARTS THAT HAVE NOT BEEN RECOMMENDED BY THE MANUFACTURER

(E.G. PARTS MADE AT HOME USING A 3D PRINTER).

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, DO NOT USE THIS FAN WITH

ANY SOLID-STATE SPEED CONTROL DEVICE.

a) If this unit is to be installed over a tub or shower, it must be marked

as appropriate for the application and be connected to a GFCI

(Ground Fault Circuit Interrupter) – protected branch circuit.

WARNING: DO NOT USE IN KITCHENS.

WARNING: THE DUCTING FROM THIS FAN TO THE

OUTSIDE OF THE BUILDING HAS A STRONG EFFECT ON THE

AIR FLOW, NOISE AND ENERGY USE OF THE FAN. USE THE SHORTEST,

STRAIGHTEST DUCT ROUTING POSSIBLE FOR BEST PERFORMANCE,

AND AVOID INSTALLING THE FAN WITH SMALLER DUCTS THAN

RECOMMENDED. INSULATION AROUND THE DUCTS CAN REDUCE ENERGY

LOSS AND INHIBIT MOLD GROWTH. FANS INSTALLED WITH EXISTING

DUCTS MAY NOT ACHIEVE THEIR RATED AIRFLOW.

INSTALLATION INSTRUCTIONS

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT

SERVICE PANEL BEFORE STARTING INSTALLATION.

WARNING: THIS FAN MUST BE INSTALLED AS PER UL AND CUL

RATED CEILING ASSEMBLY. THIS WILL REQUIRE THE INSTALLATION OF A

MINIMUM 3/8" FIRE RATED GYPSUM BOARD UNDER THE SUBFLOOR AND A

MINIMUM 5/8" GYPSUM BOARD TO COVER THE TOP OF THE FAN HOUSING.

SECTION 1

Preparing the Exhaust Fan

1. Unpack fan from the carton and conﬁrm that all pieces are present. In addition to the

exhaust fan you should have:

1 - Grill 4 - 3/8" #8 Screws

1 - Damper Assembly (attached) 4 - 7/32 washers

1 - Fire Rated Damper 2 - 1" #6 Screws

2 - 1" #8 Screws 2 - Mounting Bracket Support

4 - Mounting Rails

1 - Instruction/Safety Sheet

2. Choose the location for your fan. To ensure the best

air and sound performance, it is recommended that

the length of ducting and the number of elbows be

kept to a minimum, the radius of each elbow be

as large as possible for the installation, and that

insulated hard ducting be used. This fan will require

at least 8" of clearance in the ceiling or wall, and

will mount through drywall up to 3/4" thick. The fan

mounts between 16” or 24” on center joists using the

4 provided mounting rails.

3. Select the most convenient electrical knockout and

remove using a straight-blade screw driver (Figure 1).

4. No additional vibration deadening materials are needed for this fan.

www.airkinglimited.com

6727910 Rev. B 10-24 2 of 12

SECTION 2

New Construction

1. As per UL and CUL ﬁre resistance construction, install a minimum 3/8" Fire Rated gypsum

board 18" long so that it is centered above the fan. The gypsum board must span the

distance between the joists, typically 14.5" for joists on 16" centers (Figure 2).

2. Install the side rails on the housing and position the housing next to the joist. Line up housing

so that it will be ﬂush with the ﬁnished ceiling. Secure the ends of the rails with screws or

nails (not included) to the joists and slide the housing into the ﬁnal position (Figure 3).

SECTION 3

Existing Construction

1. As per UL and CUL ﬁre resistance construction, install a minimum 3/8" Fire Rated gypsum

board 18" long so that it is centered above the fan. The gypsum board must span the

distance between the joists, typically 14.5" for joists on 16" centers (Figure 2).

2. Set housing in position between the joist and trace an outline onto the ceiling material

(Figure 4). Set housing aside and cut opening, being careful not to cut or damage any

electrical or other hidden utilities. Install the side rails on the housing and position the

housing in the previously cut hole so that it is ﬂush with the ﬁnished ceiling. Secure the

ends of the rails to the joists (Figure 3).

SECTION 4

Ducting

NOTE: 4" OR LARGER RIGID DUCT IS RECOMMENDED FOR BEST PERFORMANCE.

CAUTION: ALL DUCTING MUST COMPLY WITH LOCAL AND NATIONAL

BUILDING CODES.

NOTE: The ducting from this fan to the outside of the building has a strong effect on the air

ﬂow, noise and energy use of the fan. Use the shortest, straightest duct routing possible

for best performance, and avoid installing the fan with smaller ducts than recommended.

Insulation around the ducts can reduce energy loss and inhibit mold growth. Fans installed with

existing ducts may not achieve their rated air ﬂow.

Figure 1

Figure 3

Housing

Joist

Mounting Rails

Figure 4

Joist

Figure 2

Joist

Housing

5/8" Fire Rated Gypsum Board

Sub Floor 3/8" Fire Rated Gypsum Board

Finished Ceiling

REQUIREMENTS FOR INSTALLATION IN UL/ULC RATED CEILING ASSEMBLIES

SEE UL AND ULC FIRE RESISTANCE DIRECTORY

RECTANGULAR SECTION OF 3/8" FIRE RATED

GYP BOARD MINIMUM 18" LONG BY WIDTH

OF JOIST SPACE

SUB FLOOR

FAN HOUSING 5/8" F.R. GYP BOARD TO

COVER TOP OF FAN

FAN HOUSING

MOUNTING SCREW

AND WASHER MIN.

LENGTH 1.5"

FAN HOUSING

MOUNTING RAIL

FINISHED CEILING

GRILL

MOUNTING

SCREW

METAL

GRILL

CEILING

RADIATION

DAMPER

MOUNTING

SCREW

DAMPER

MOUNTING

FRAME

9-3/8"

10-7/16"

8-1/8"

9-1/2"

11-5/16"

12-15/16"

10-5/16"

11/16"

Produkt Specifikationer

Mærke:	Air King
Kategori:	Emhætte
Model:	FRAK100D

Har du brug for hjælp?

Hvis du har brug for hjælp til Air King FRAK100D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Emhætte Air King Manualer

Air King BFQ80 Manual

28 August 2025

Air King LE600A Manual

28 August 2025

Air King AB36WH Manual

21 August 2025

Air King D4SG Manual

18 August 2025

Air King D4DG Manual

18 August 2025

Air King FRAK100D Manual

7 Februar 2025

Air King FRAK50S Manual

7 Februar 2025

Air King FRAK100 Manual

7 Februar 2025

Air King FRAK80 Manual

7 Februar 2025

Air King FRAK90 Manual

7 Februar 2025

Emhætte Manualer

Nyeste Emhætte Manualer

Caple TBU521 Manual

29 September 2025

Caple CE903SS Manual

29 September 2025

Kernau KBH 0761 X Manual

29 September 2025

Caple CGC911 Manual

29 September 2025

Caple FGC920 Manual

29 September 2025

Siemens LI23030 Manual

29 September 2025

Caple ZEL900 Manual

29 September 2025

Caple CE903WH Manual

29 September 2025

Vestfrost VE–90RSABK Manual

29 September 2025

Caple BUCH75 Manual

29 September 2025