AKAI APC 40 Manual

AKAI Midi blev rørt APC 40

Læs gratis den danske manual til AKAI APC 40 (6 sider) i kategorien Midi blev rørt. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om AKAI APC 40, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

WWW.AKAIPRO.COM

 QUICKSTART GUIDE

ENGLISH

BOX CONTENTS

y LPD8 y Software CD

y y

USB cable Safety Instructions & Warranty Information

SOFTWARE CD

PC Users: To install the Akai Professional LPD8 Editor, open the contents of the disc, double-click

Setup.exe, and follow the on-screen instructions. To open the

editor, connect the LPD8 to your computer

with a standard USB cable (included) then double-click LPD8 Editor.exe.

Mac Users: Drag the contents of the disc to an appropriate location on your hard drive. To open the editor,

connect the LPD8 to your computer with a standard USB cable (included) then double-click the LPD8 Editor.

Note: Always connect the LPD8 to your computer before opening the editor.

TOP PANEL OVERVIEW

4 5

2 3

1. USB CONNECTION – Plug a standard USB cable into this outlet and into the USB port of your

computer. The computer’s USB port will provide power to the LPD8.

2. 8 VELOCITY-SENSITIVE PADS – The pads can be used to trigger drum hits or other samples in your

software. The pads are velocity-sensitive, which makes them very responsive and intuitive to play.

3. 8 ASSIGNABLE KNOBS – Each 270-degree knob can be used to send continuous control data to a

desktop audio workstation or external MIDI device.

4. PROGRAM – When this button is active, press any one of Pads 1-4 to recall the preset of the same

number (its LED will light). To use the pads again as normal, press the PAD, PROG CHNG, or CC

button.

Each of these buttons determines the kind of MIDI message the LPD8's pads will send.

5. PAD – When this button is active, the LPD8's pads will send MIDI Note messages. These messages

are assignable in the included software editor.

6. PROG CHNG – When this button is active, the LPD8's pads will send Program Change messages.

These messages are assignable in the included software editor.

7. CC – When this button is active, the LPD8's pads will send out MIDI Control Change messages. These

messages are assignable in the included software editor.

Produkt Specifikationer

Mærke:	AKAI
Kategori:	Midi blev rørt
Model:	APC 40
Bredde:	429 mm
Dybde:	334 mm
Højde:	67 mm
Vægt:	2640 g
Produktfarve:	Sort
Hurtig start guide:	Ja
Normal brug:	Koncert/studie
MIDI udgang:	Ja
MIDI indgang:	Ja