Multifunctional Wireless Router
Installation GuideR36AH
Front Panel Rear Panel
Device Overview
Funconal Descripons
In Broadband Router mode:
This port is set as WAN to be connect with Ethernet port on the DSL/cable modem
for PPPoE /Dynamic IP/Stac IP/PPTP/L2TP IP address allocaon
In 3G/4G Router mode:
This port is set as LAN to share Internet access via Ethernet connecon to the
desktop/laptop computer or network peripherals
In WiFi Hotspot Extender Router mode:
This port is set as LAN to share Internet access via Ethernet port on the
desktop/laptop computer or network peripherals
These ports are set as LAN to share Internet access via Ethernet with
desktop/laptop computer(s) or network peripherals
USB wireless adapter to connect to remote WiFi hotspot as Internet source
Plug in 3G/4G USB modem as source of Internet access
Connect an antenna to ANT port
This port is used to connect to the power adapter.
Please use the power adapter in package to ensure device proper operaon.
Interface
WAN / LAN2
PoE LAN1
USB
ANT
PWR
1
3 4
Before setting up, please check with your service provider to obtain an instruction sheet
for Internet access.
Info you will need from ISP (Internet Service Provider) company for Internet access:
xDSL PPPoE, PPTP, L2TP
An instruction sheet for Internet access from ISP (Internet Service Provider) company
A subscribed xDSL/cable modem (with RJ-45 LAN interface) from carrier company
3G/4G Intenet access service
SIM card
3G/4G USB Modem
An instruction sheet for Internet access from carrier company
Wireless hotspot Internet access service
An instruction sheet with hotspot connection parameters:
SSID, username/password, …etc. if any) for Internet Access from carrier company
Access to the RouterPreparation Before Installation
Via Wired Connection
Connect computer to LAN1 port on device via Ethernet RJ-45 cable.
Open your web browser, and type-in “
alfa.myalfasetup.com” or
“
192.168.36.1” in the address bar.
Via Wireless Connection
On your laptop, tablet computer or smartphone, enable WiFi service on your
device, and search WiFi name“
R36AH-xxxxxx”, then associate with it.
Open your web browser, and type-in “
alfa.myalfasetup.com” or
“192.168.36.1” in the address bar.
alfa.myalfasetup.com
Before proceeding any further, please make sure the LAN1 LED is “ON”.
Before proceeding any further, please make sure the wireless LED is “ON”.
USB 3G/4G Router
Connect 3G/4G USB modem
to router, and share Internet
with local computers,
smartphones or other network
peripherals.
Wireless hotspot extender
Obtain Internet access from a
wireless Internet service
provider (WISP) wirelessly, and
share Internet with local
computers, smartphones or
other network peripherals.
Ethernet Router
Subscribe xDSL PPPoE, fixed IP
,dynamic IP, PPTP, L2TP
Internet access from ISP
(Internet Service Provider),
and share Internet with local
computers, smartphones or
other network peripherals.
Modem
Internet
WiFi Hotspot
3G/4G USB Modem
4G Tower
Operation Modes
2
Descripons
On - Power on
- No power
On - Device is up, and running properly
Blinking - This LED blinks when device is sending or receiving data
On - LAN port is connected
Flashing
On - USB device recognized, and supported by the router
Blinking - USB device NOT recognized, Internet access is not available
On
Flashing
On - Internet or intranet access is available
-
NO Internet/intranet access or the router is set to Ethernet router mode
Blinking (500ms interval): network connected, but NO Internet access
Blinking
Toggle to r
- reboot device
- reboot device
with factory default parameters
LED Indicator
PWR
(Blue)
SYS
(Blue)
LAN
(Blue)
WAN / USB
(Blue)
WAN / LAN2
(Blue)
Wireless (Blue)
Wireless
RESET
(located in the
WAN / LAN2 PoE LAN1 PWRANT
LED Indicators & Buttons
192.168.36.1
Set Up
Reset
• 1 x multi functional wireless
router
• 1 x omni RP-SMA antenna for
multifunctional wireless router
signal transmission
• 1 x 12V DC power adapter for
multifunctional wireless router
• 1 x multifunctional wireless
router installation guide (this le)
•
1 x Ethernet cable for connecting
the router and computer
Package Content
Thank you for choosing multifunctional wireless router.
Before installing, please check the following items in product package.
