Allegri Gemini 032550-041-FR001 Manual

Allegri lampe Gemini 032550-041-FR001

Læs gratis den danske manual til Allegri Gemini 032550-041-FR001 (6 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Allegri Gemini 032550-041-FR001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

MODEL 032550-041-FR001

ASSEMBLY AND DRESSING INSTRUCTIONS

Blending innovative design, cutting-edge technology and the grace and elegance of traditional crystal, ALLEGRI® proudly brings you a new approach

to lighting. ALLEGRI® fixtures are made from the finest raw materials and are brought to life through a combination of traditional manufacturing, such

as sand casting, hand-forging and technology driven techniques including laser cutting.

Enclosed are detailed instructions on how to properly install your fixture. Please read all instructions carefully. If you need further assistance, please

contact the dealer from which you purchased this product or call 800-525-2655 to speak with an ALLEGRI® customer service representative. We hope

you enjoy your fixture!

WWW.ALLEGRICRYSTAL.COM

800.525.2655

B220-0006- W27*H60

Ø6

B220-0 04-0 W19*H42B220-0004-00 W19*H42

ASSEMBLY AND DRESSING INSTRUCTIONS

GENERAL NOTES

For your safety and proper operation of fixture, read and understand all instructions completely before commencing installation.

This fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.

Extreme care should be taken to avoid damage to the surface of lighting fixture and wires. Wearing gloves is recommended for installation.

Connect ribbed wire of lighting fixture to live wire, while smooth wire of lighting to neutral. Connect bare copper or silver color ground wire of

fixture to the double colored or green wire of outlet box.

Use UL LISTED wire nuts for the wiring connections in this fixture. Wrap wire nut connections with UL LISTED electrical tape.

Keep lighting away from acid, alkali and other corrosive chemical or gas; clean the fixture with a clean cloth only.

Fixture must be firmly secured when installing ceiling tube, chain pipe and other connecting parts.

Never cover the lighting fixture when power is connected.

Disconnect the power before installing, cleaning and/or replacing light bulb.

Extreme care should be taken when installing and cleaning of Glass and/or Crystal Components.

This product is rated 110-130V/60HZ bulb 60W Maximum.

Save these instructions for future reference.

WARNING

The electricity must be turned off at the main fuse box or circuit breaker before installing this fixture. Turning the power off using the light switch may

not be sufficient to prevent electrical shock.