Allegri Lina 035563-010-FR001 Manual

Allegri lampe Lina 035563-010-FR001

Læs gratis den danske manual til Allegri Lina 035563-010-FR001 (6 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Allegri Lina 035563-010-FR001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

MODEL 035563-010-FR001

ASSEMBLY AND DRESSING INSTRUCTIONS

Blending innovative design, cutting-edge technology and the grace and elegance of traditional crystal, ALLEGRI® proudly brings you a new approach

to lighting. ALLEGRI® fixtures are made from the finest raw materials and are brought to life through a combination of traditional manufacturing, such

as sand casting, hand-forging and technology driven techniques including laser cutting.

Enclosed are detailed instructions on how to properly install your fixture. Please read all instructions carefully. If you need further assistance, please

contact the dealer from which you purchased this product or call 800-525-2655 to speak with an ALLEGRI® customer service representative. We hope

you enjoy your fixture!

WWW.ALLEGRICRYSTAL.COM

800.525.2655

ASSEMBLY AND DRESSING INSTRUCTIONS

GENERAL NOTES

vFor your safety and proper operation of fixture, read and understand all instructions completely before commencing installation.

vThis fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.

vExtreme care should be taken to avoid damage to the surface of lighting fixture and wires. Wearing gloves is recommended for installation.

vConnect ribbed wire of lighting fixture to live wire, while smooth wire of lighting to neutral. Connect bare copper or silver color ground wire of

fixture to the double colored or green wire of outlet box.

vUse UL LISTED wire nuts for the wiring connections in this fixture. Wrap wire nut connections with UL LISTED electrical tape.

vKeep lighting away from acid, alkali and other corrosive chemical or gas; clean the fixture with a clean cloth only.

vFixture must be firmly secured when installing ceiling tube, chain pipe and other connecting parts.

vNever cover the lighting fixture when power is connected.

vDisconnect the power before installing, cleaning and/or replacing light bulb.

vExtreme care should be taken when installing and cleaning of Glass and/or Crystal Components.

vThis product is rated 110-130V/60HZ bulb 40W Maximum.

vSave these instructions for future reference.

WARNING

The electricity must be turned off at the main fuse box or circuit breaker before installing this fixture. Turning the power off using the light switch may

not be sufficient to prevent electrical shock.

*ALLEGRI will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

WARNING!

CONTENTS ARE FRAGILE

HANDLE WITH CARE

THE METAL FRAME, FINISH AND CRYSTAL COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE.

PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION.

PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED.

REFER TO THE PARTS LIST TO AVOID ANY CONFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.