Allen & Heath GS1 Manual

Allen & Heath Ikke kategoriseret GS1

Læs gratis den danske manual til Allen & Heath GS1 (38 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Allen & Heath GS1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/38
GS1
SERVICE
MANUAL
PUBLICATION AP2064
compact 8 buss console
ALLEN & HEATH 2S1SM1
copyright © 1995 ALLEN & HEATH Ltd. All rights reserved Publication ...................... AP2064 Issue 1
INTRODUCTION
The information presented in this manual is intended for competent technical personnel to carry out service and product
support for the . We assume that the reader is familiar with the related electronic theory and audio terminology,GS1
and is able to carry out basic servicing, fault-finding and repair of audio equipment of this type. Service personnel should
also be familiar with audio systems, mains earthing and power requirements, as well as handling precautions.
For further information on the operation and application of the GS1, please refer to the USER GUIDE publication
AP2061 supplied with each unit.
Whilst we believe the information in this manual to be reliable we do not assume responsibility for inaccuracies. We
also reserve the right to make changes in the interest of further product development.
SERVICE AND TECHNICAL SUPPORT
Under normal conditions the GS1 does not require user maintenance or internal calibration. Any service work required
should be carried out by qualified technical personnel only.
We are able to oer further product support through our worldwide distribution network. To help us provide the most
ecient service please would you quote the console serial number in any communication regarding this product.
SAFETY WARNING !
Mains electricity is dangerous and can kill. Mains voltage is not present within the
GS1
console but is present in the external power supply unit. Do not attempt to disassemble the
power supply unit. Do not carry out any work within the
GS1
console while it is powered. The
external power supply unit is factory set to match your local a.c. mains supply and marked
on the cover. Check that this matches your local mains supply. Check your mains wiring
and earthing before switching on.
CONTENTS
INTRODUCTION ................................................................................... 2
SERVICE & TECHNICAL SUPPORT .................................................... 2
PRECAUTIONS ..................................................................................... 2
DIMENSIONS ........................................................................................ 3
CONNECTIONS .................................................................................... 3
TECHNICAL SPECIFICATION .............................................................. 4
MIDI IMPLEMENTATION DATA ........................................................... 4
CONSOLE FUNCTIONAL CHECK ....................................................... 5
CONSOLE DISASSEMBLY ................................................................... 7
REMOVING THE CONSOLE CIRCUIT BOARD .................................. 8
EXPANDER DISASSEMBLY ................................................................. 9
REMOVING THE EXPANDER CIRCUIT BOARD ................................ 10
EXPANDER OPTION FITTING INSTRUCTIONS ................................. 11
METERBRIDGE OPTION FITTING INSTRUCTIONS .......................... 12
ORDERING SPARE PARTS ................................................................. 16
TECHNICAL DIAGRAMS
BLOCK DIAGRAM .................................................................................
GS1 CONSOLE CIRCUIT DIAGRAM PCB KEY ..................................
PCB COMPONENT LAYOUT - CHANS 1 to 8 .....................................
PCB COMPONENT LAYOUT - CHANS 9 to 16 & MASTER L-R .........
CONSOLE CIRCUIT DIAGRAMS (8 pages) .........................................
GS1 EXPANDER CIRCUIT DIAGRAM PCB KEY ................................
EXPANDER PCB COMPONENT LAYOUT ...........................................
EXPANDER CIRCUIT DIAGRAMS (3 pages) .......................................
METERBRIDGE PCB LAYOUT.............................................................
METERBRIDGE CIRCUIT DIAGRAM ...................................................

Produkt Specifikationer

Mærke: Allen & Heath
Kategori: Ikke kategoriseret
Model: GS1

Har du brug for hjælp?

Hvis du har brug for hjælp til Allen & Heath GS1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Allen & Heath Manualer

Allen & Heath

Allen & Heath MixWizard WZ3 Manual

12 August 2025
Allen & Heath

Allen & Heath MixWizard WZ2 Manual

12 August 2025
Allen & Heath

Allen & Heath DT22 Manual

27 Juli 2025
Allen & Heath

Allen & Heath SQ-Rack Manual

10 Juli 2025
Allen & Heath

Allen & Heath IP4 Manual

4 Februar 2025
Allen & Heath

Allen & Heath dLive DM64 Manual

19 September 2024
Allen & Heath

Allen & Heath Studio 12 Manual

19 September 2024
Allen & Heath

Allen & Heath Scepter Manual

1 September 2024
Allen & Heath

Allen & Heath Avantis Manual

29 August 2024
Allen & Heath

Allen & Heath DL1000 Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM

IFM SU9030 Manual

13 September 2025
IFM

IFM O2U554 Manual

13 September 2025
Speco Technologies

Speco Technologies HTi70TM Manual

13 September 2025
QSC

QSC RMXa Manual

13 September 2025
Tineco

Tineco Floor One S2 Series Manual

13 September 2025
Tineco

Tineco Floor One S3 Breeze Manual

13 September 2025
Tineco

Tineco Floor One S5 Steam Manual

13 September 2025
Osram

Osram VX500-CB Manual

13 September 2025
Zelmer

Zelmer ZTS7990 Manual

13 September 2025
Osram

Osram VX250-SP Manual

13 September 2025