Alpine KIT-7ID Manual


Læs gratis den danske manual til Alpine KIT-7ID (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Alpine KIT-7ID, eller vil du spørge andre brugere om produktet?

Side 1/8
1
17. Connectivity Layout
16
INSTALLATION MANUAL
IVECO
Model: Daily VI & Daily VII
Year: Daily VII > 2019 & Daily VI > 2014
Kit content: double DIN facia plate; mounting
brackets + screws; SWRC CAN bus & LIN bus
wiring harness; antenna adapters; camera
adapter; USB/AUX adapter; speaker adapter
1a
2
13
6
5
7
8
9
10
11
12
3
4
14
16
1b
15 Optional 1
Optional 2
5. In order to fit the radio unit some plastic
parts need to be cut and removed. The
parts to be removed are the four flaps
and the plastic rectangular central
protrusion highlighted in the pictures.
32
Content and wiring harness connections
1A/1B - to RADIO connectors
2 - to CAR connector
3 - CAMERA input
4 - AUX input
5 - CAMERA control/REMOTE out
6 - POWER ANTENNA output
7 - to optional/extra SERVICES:
Orange Reverse output
Green Speed output
8 - to INTERFACE connector
9 - to LIN BUS (point 7 / page 4-5)
10 - External power access
11 - SPEAKER connection (point 9 / page 9)
12 7)- CAN BUS access (point 7 / page 4-
13 - FAKRA antenna adapter
14 - ISO/DIN antenna adapter
15 - USB/AUX adapter
16 - CAMERA input adapter
OPTIONAL 1 (point 7 / page 5)
OPTIONAL 2 (point 9 / page 9)
1. This is how the original dashboard looks
like.
2. Remove the drawer and unscrew the
two screws as shown in the picture.
3. Remove the rubber compartment as
shown in the picture.
4. Unscrew the central screw and remove
the original facia.
6. Connect the harness as indicated on left
side (page 2).


Produkt Specifikationer

Mærke: Alpine
Kategori: Ikke kategoriseret
Model: KIT-7ID

Har du brug for hjælp?

Hvis du har brug for hjælp til Alpine KIT-7ID stil et spørgsmål nedenfor, og andre brugere vil svare dig