Alpine KIT-W997SMTB Manual

Alpine Ikke kategoriseret KIT-W997SMTB

Læs gratis den danske manual til Alpine KIT-W997SMTB (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Alpine KIT-W997SMTB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

IF IN THE VEHICLE SETTINGS THERE ISN'T THE

CHANGE TIME MENU,

AND YOU WANT TO SET THE VEHICLECLOCK?

PLEASE FOLLOW THE PROCEDURE BELOW:

Steering wheel remote control

interface installation kit for:

SMART

Model: For Two / For Four

Year: 2012 >

Kit content: SWRC CAN Bus interface

wiring harness

antenna adapter

radio adapter

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

ATTENTION: CHANGE TIME MENU

- The vehicle must be stationary with the handbrake on

- Turn on and off the vehicle (Key in pos. n°2) for three times;

- Use "volume +" to increase the hours

- Use "Volume -" to increase the minutes

- Use "Voice" to change 12h/24h format

To exit the menu, switch off the

car for at least 5 sec.

NOTE:

When turning on the car, the clock's hands automatically reach the

correct time.

Please note that the clock can have a variation of roughly 1 minute per

month.

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

INSTALLATION MANUAL

Content and wiring harness connections

Connect cables to the radio side as follow:

1 - to CAR CONNECTOR (connect with original rear view camera only)

2A/2B - to CAR CONNECTORS

3 - CAMERA control / REMOTE output

4 - to the RADIO STEERING WHEEL REMOTE SOCKET

(NOTE: do not connect to microphone socket)

5 - to RADIO POWER CONNECTOR

6 - to RADIO ANTENNA CONNECTOR

7 - to CAR ANTENNA CONNECTOR

8 - CONNECTORto 10

(if the vehicle is equipped with the original touchscreen radio)

9 - to CONNECTOR 10

(if the vehicle is NOT equipped with the original touchscreen radio)

11 - to 2A CONNECTOR (if the original radio is equipped with NAVI)

12 - to CAR CONNECTOR (if the original radio is equipped with NAVI)

13 - to RADIO CAMREA connector

(if the vehicle is equipped with OEM REAR VIEW CAMERA)

14 - SPEEDPULSE output

1- Volume +

2- Volume –

3- Short press > Accept incoming call

Long press > Voice

cut along the dottd line - copy for the vehicle owner

ATTENTION!

In order to prevent ESD damage, the WHEEL REMOTE JACK must be

connected before plugging in the connectors on car side.

Produkt Specifikationer

Mærke:	Alpine
Kategori:	Ikke kategoriseret
Model:	KIT-W997SMTB

Har du brug for hjælp?

Hvis du har brug for hjælp til Alpine KIT-W997SMTB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Alpine Manualer

Alpine SPC-106CRA2-2 Manual

14 Juni 2025

Alpine SPC-W84AS907-2 Manual

8 Januar 2025

Alpine APF-D200VW Manual

2 Januar 2025

Alpine VPE-S431 Manual

2 Januar 2025

Alpine TDM-7592R Manual

2 Januar 2025

Alpine TUE-T012 Manual

2 Januar 2025

Alpine TUE-T252TX Manual

2 Januar 2025

Alpine APF-F281094-29-1DU Manual

2 Januar 2025

Alpine CDE-7857RB Manual

2 Januar 2025

Alpine CDA-7853R Manual

2 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025