Alpine MQR-III Manual

Alpine Ikke kategoriseret MQR-III

Læs gratis den danske manual til Alpine MQR-III (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Alpine MQR-III, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Congratulations on your purchase of an MQR III or MQR IV nder bracket.

The stable guidescope rings of the MQR are connected by a solid rail. The

nder bracket can be used with the Baader Standard Base # 2457000

and many other viewnder mounts (Vixen, Synta, Celestron) with the 70

mm high Universal Red Dot Mount (RDM) # 2457010, at which a standard

dovetail is attached to.

The standard base can be attached with one or two screws to telescopes

with diameters between 130 and 400 mm. The sinusoidal base adapts to

the telescope tube in a non-rotating manner and always has two stable,

linear areas of contact.

Removal of the dovetail to use the Mini-

Weaver compatible dovetail

You can remove the RDM from the base

plate of the guidescope rings by loosening

the two upper M5 hexagon socket screws.

This requires a 4 mm hex wrench. Then you

can fasten the pipe clamps with suitable

screws on standard visor rails with Mini-

Weaver dovetail as well as on at surfaces.

Removing the RDM Adapter

for low proﬁle mounting

The dovetail can also be removed from the

RDM by loosening the two lower hexagon

socket screws.

Using the two new M5x12 screws supplied,

you can now screw the dovetail directly to the

base plate of the pipe clamps. This allows a

very at viewnder mounting.

Manual for MQR III and MQR IV Multipurpose Finder Bracket

# 24 7020 and # 24 70305 5

Guidescope rings and base plate

without the RDM, e.g. for rails

with Mini-Weaver-dovetail.

The RDM with dovetail for

standard ﬁnder bases.

Removing the dovetail from

the RDM.

Low-Proﬁle-Mount: The dovetail

can be attached directly to the

base plate.

Example of use: Baader Varioﬁnder with

MQR IV in Low-Proﬁle-Conﬁguration.

Produkt Specifikationer

Mærke:	Alpine
Kategori:	Ikke kategoriseret
Model:	MQR-III

Har du brug for hjælp?

Hvis du har brug for hjælp til Alpine MQR-III stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Alpine Manualer

Alpine SPC-106CRA2-2 Manual

14 Juni 2025

Alpine SPC-W84AS907-2 Manual

8 Januar 2025

Alpine APF-D200VW Manual

2 Januar 2025

Alpine VPE-S431 Manual

2 Januar 2025

Alpine TDM-7592R Manual

2 Januar 2025

Alpine TUE-T012 Manual

2 Januar 2025

Alpine TUE-T252TX Manual

2 Januar 2025

Alpine APF-F281094-29-1DU Manual

2 Januar 2025

Alpine CDE-7857RB Manual

2 Januar 2025

Alpine CDA-7853R Manual

2 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1024W Manual

15 Juni 2025

Backyard Pro 554PL2030 Manual

15 Juni 2025

Haier 1U18TE2HDA Manual

15 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

Planet XGPN-400AXV Manual

15 Juni 2025

Cadac 3 Cook Turbo Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Sony SZC-4008 Manual

15 Juni 2025

Watts ETX-15 Manual

15 Juni 2025

Sigma REMOTE ONE Manual

15 Juni 2025