Amana AMV6507RGS Manual

Amana Magnetron AMV6507RGS

Læs gratis den danske manual til Amana AMV6507RGS (12 sider) i kategorien Magnetron. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Amana AMV6507RGS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

MICROWAVE HOOD COMBINATION SAFETY

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

MICROWAVE HOOD COMBINATION SAFETY ............................1

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Remove Cardboard Template ......................................................2

Location Requirements ................................................................2

Product Dimensions .....................................................................3

Electrical Requirements ...............................................................3

INSTALLATION INSTRUCTIONS ...................................................4

Remove Mounting Plate ...............................................................4

Rotate Blower Motor ....................................................................4

Locate Wall Stud(s) ......................................................................6

Mark Rear Wall .............................................................................7

Drill Holes in Rear Wall .................................................................7

Attach Mounting Plate to Wall .....................................................8

Prepare Upper Cabinet ................................................................8

Install Damper Assembly .............................................................9

Install the Microwave Oven ..........................................................9

Complete Installation .................................................................10

VENTING DESIGN SPECIFICATIONS .........................................11

ASSISTANCE 12 ................................................................................

Replacement Parts .....................................................................12

Accessories 12 ................................................................................

Table of Contents

W11084412A

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools

listed here.

■Measuring tape

■Pencil

■Masking tape or

thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver

for Z\v - 20 x 3" (7.62 cm)

bolts

■Drill

■C\zn C\," (5 mm), " (10 mm),

B\," (16 mm) drill bits

■C\v" (19 mm) hole saw

■Diagonal wire cutting pliers

■Stud ﬁnder

■M\zn" (11.11 mm) socket

wrench (or box wrench) for

Z\v" x 2" (6.35 mm x

5.08 cm) lag screws

■1½" (3.8 cm) diam. hole

drill bit for wood or metal

cabinet

■Keyhole saw

■Caulking gun and

weatherproof caulking

compound

■Duct tape

Parts Supplied

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

A B C D E F G

A. C\zn

-24 x 3" (7.62 cm) round-head

bolts (2)

B. -20 x 3" (7.62 cm) ﬂat-head Z\v

bolts (2)

C. Washers (2)

D. " (5 mm) toggle nuts (2)C\zn

E. " x 2" (6.35 mm x 5.08 cm) Z\v

lag screws (2)

F. Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■Upper cabinet template

■Mounting plate (attached to

back of microwave oven)

■Cardboard template (part of

packaging)

■Aluminum grease ﬁlters

■Charcoal ﬁlters (Depending

on model, charcoal ﬁlters may

not be included. See User

Instructions.)

NOTE: Depending on model, aluminum grease ﬁlter and charcoal

ﬁlter may be combined.

Materials Needed

■Standard ﬁttings for wall or roof venting. See the “Venting

Design Speciﬁcations” section.

Remove Cardboard Template

The cardboard piece from the top of the microwave oven

packaging is perforated. The piece inside the perforation

is for use as a rear wall template.

1. Cut along the perforation to separate the template from the

rest of the cardboard packaging.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” part of installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■Minimum installation dimensions. See the “Installation

Dimensions” illustration.

■Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and

minimum C\," (10 mm) thickness drywall or plaster/lath within

cabinet opening.

■Support for weight of 150 lbs (68 kg) which includes

microwave oven and items placed inside the microwave

oven and upper cabinet.

■Grounded electrical outlet inside upper cabinet. See the

“Electrical Requirements” section.

NOTES:

■If installing the microwave oven near a left sidewall, make

sure there is at least 6" (15.2 cm) of clearance between the

wall and the microwave oven so that the door can open fully.

■Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate, or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■Cutout must be free of any obstructions so that the vent ﬁts

properly and the damper blade opens freely and fully.

For Roof Venting Installation Only:

■If you are using a rectangular-to-round transition piece,

the 3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully.

See “Rectangular to Round Transition” illustration in the

“Venting Design Speciﬁcations” section.

Produkt Specifikationer

Mærke:	Amana
Kategori:	Magnetron
Model:	AMV6507RGS

Har du brug for hjælp?

Hvis du har brug for hjælp til Amana AMV6507RGS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Magnetron Amana Manualer

Amana AMV6507RGS Manual

20 Februar 2025

Amana UMV1170LS Manual

2 September 2024

Amana UMC5225GZ Manual

2 September 2024

Amana UMV1170LW Manual

2 September 2024

Amana UMV1170LB Manual

2 September 2024

Amana UMV1160CB Manual

28 August 2024

Amana UMV1160CW Manual

28 August 2024

Amana AMC1070XB Manual

17 August 2024

Amana ULD510 Manual

16 August 2024

Amana LD510M Manual

14 August 2024

Magnetron Manualer

Nyeste Magnetron Manualer

Toshiba MWP-MM20P(WH) Manual

27 Marts 2025

Whirlpool WMN461BXF Manual

4 Marts 2025

LG MSER1130B Manual

3 Marts 2025

Stoves ST BIMWG6025 Manual

27 Februar 2025

Midea EM720CWW Manual

26 Februar 2025

Sheffield PLA0920 Manual

26 Februar 2025

Sheffield PLA0925 Manual

26 Februar 2025

Rival RGTM702 Manual

27 Januar 2025

Ikea ÄSKEBO 605.876.15 Manual

16 Januar 2025

Ikea TILLREDA 905.464.78 Manual

16 Januar 2025