American Audio Concept:1 Manual

American Audio Ikke kategoriseret Concept:1

Læs gratis den danske manual til American Audio Concept:1 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 3 anmeldelser. Har du et spørgsmål om American Audio Concept:1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

User Instructions

American DJ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Concept 1™ Introduction

American DJ®

Revised 10/03

General instructions: To optimize the performance of this product,

please read these operating instructions carefully to familiarize yourself

with the basic operations of this unit. These instructions contain impor-

tant safety information regarding the use and maintenance of this unit.

Please keep this manual with the unit, for future reference.

Unpacking: Thank you for purchasing the Concept 1™ by American

DJ . Every Concept 1™ has been thoroughly tested and has been ®

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton

appears to be damaged, carefully inspect your xture for any damage

and be sure all accessories necessary to operate the unit has arrived

intact. In the case damage has been found or parts are missing, please

contact our toll free customer support number for further instructions.

Do not return this unit to your dealer without rst contacting customer

support.

Introduction: The Concept 1

is part of American DJʼs continuing

pursuit for creating high quality affordable intelligent fixtures. The Con-

cept 1™ is a DMX scanner with a built-in 4.9mW diode laser. Both the

laser and the lamp can be operated at the same time for truly amazing

effects. This unit is light weight and compact which makes it a great

piece for mobile DJʼs and clubs. For best results use this unit with a fog

machine to enhance the output of the beams and laser.

Customer Support: American DJ provides a toll free customer sup-®

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:

00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ .®

Concept 1™ Safety Precautions

• Scanner and Laser in one effect

• 4.9mW diode laser

• 15 colors plus white

• Two 4 split colors

• 19 gobos plus spot

• Two interchangeable gobos

• Separate color and gobo wheels

• High Speed Shutter with variable Speed

• 230 degree pan / 110 degree tilt

• Projection angle 16 degrees

• Full Micro-stepping, with 4 stepper motors.

• Built in Microphone

• Auto switch to Stand-Alone (Master/Slave) operation

when DMX signal is disconnected

• Run up to 16 heads without controller

• DMX-512 protocol

• Full Focusing

• Fan cooled

• Uses nine DMX Channels

• Digital DMX display

• Optional Concept-C controller (Not Included)

Safety Issue: This unit may blow a fuse if the maximum allotted load

of 7 amps is reached. If the fuse needs replacement, please see the

fuse replacement guidelines on page 17.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage

for your unit.

• Do not attempt to operate this unit if the power cord has been frayed

or broken. Do not attempt to remove or break off the ground prong

from the electrical cord. This prong is used to reduce the risk of elec-

trical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when itʼs cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors

voids all warranties.

• During long periods of non-use, disconnect the unitʼs main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 18 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (includ-

ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Concept 1™ Warranty Registration

The Concept 1™ carries a one yeare (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

If the unit is under warranty you must provide a copy of your proof of

purchase invoice. Please contact American DJ® customer support for

a R.A. number.

Concept 1™ Features

Concept 1™ Product Registration

The Concept 1

comes with a 1 year limited warranty. We recom-

mend filling out the warranty registration card that came with your

fixture to validate your warranty. You may also register your product

on-line at www.americandj.com.

Produkt Specifikationer

Mærke:	American Audio
Kategori:	Ikke kategoriseret
Model:	Concept:1

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio Concept:1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret American Audio Manualer

American Audio ETR 1000R Manual

14 August 2025

American Audio SENSE8 Manual

14 August 2025

American Audio Mega Pixel LED Manual

14 August 2025

American Audio Accu Scan 250 Manual

14 August 2025

American Audio Galaxian Manual

14 August 2025

American Audio Accu Color 250 Manual

14 August 2025

American Audio Color Burst 8 DMX Manual

14 August 2025

American Audio Emerald Scan Manual

14 August 2025

American Audio Trilogy Manual

14 August 2025

American Audio Tri Image Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Adj Event Bar Q4 Manual

14 August 2025

Bartscher A114003 Manual

14 August 2025

Swann SRNHD-888MSDWB2 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Panduit FO6CB Manual

14 August 2025

Renkforce RF-WAT-300 Manual

14 August 2025

Swann SWIFI-MPRST Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Midea 24DME4R109 Manual

14 August 2025

Eliminator Lighting Aqua LED Manual

14 August 2025