American Audio Deco 250 Manual

American Audio Ikke kategoriseret Deco 250

Læs gratis den danske manual til American Audio Deco 250 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om American Audio Deco 250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

American DJ

4295 Charter Street

Los Angeles CA. 90058

www.americandj.com

12/03

User Instructions

Unpacking: Thank you for purchasing the Deco 250™ by American

DJ . Every Deco 250™ has been thoroughly tested and has been ®

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: This unit uses 11 pieces of individual textured glass

mounted on a wheel and a 11 colored tiles to produce vibrant colors

and extravagant gobo patterns. The Deco 250™ is an intelligent fixture

that can operate in DMX mode, as a stand alone sound active piece,

or in a Master/Slave configuration. The Deco 250™ alsp comes with

several built in programs. This piece is best used with a fog or haze

machine to enhance the beam output. When used in DMX mode the

fixture requires 3 DMX channels. When used as a stand alone unit

or when used in multiples linked in a master/slave configuration an

optional MINI/C controller may be used to control a blackout function.

Customer Support: American DJ provides a toll free customer sup-®

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to

5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ .®

Deco 250™ General Information

• ELC 24v/250w Lamp

• DMX-512 Compatible

• 11 Textured Glass Gobos, and 11 Colors

• Fan Cooled.

• Master/Slave Operation

• Linkable

Deco 250™ Main Features

The Deco 250™ carries a one year (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

If the unit is under warranty, you must provide a copy of your proof of

purchase invoice. Please contact American DJ customer support for ®

a R.A. number.

Deco 250™ Product Registration

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage

for your unit.

• Do not attempt to operate this unit if the power cord has been frayed

or broken.

• Do not attempt to remove or break off the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when itʼs cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors

voids all warranties.

• During long periods of non-use, disconnect the unitʼs main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 13 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (includ-

ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Deco 250™ Safety Precautions

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. If you do not wish to

read through the manual, listed below are the master/slave dipswitch

setting. Link the units together using XLR cables and follow the dip-

switch chart for sound activation mode. Please keep this manual with

the unit, for future reference.

Deco 250™ Quick Start Instructions

Deco 250™ Master/Slave Settings

This chart details the Master/Slave dipswitch setting for Master/Slave

configuration. Use this configuration only when you will be using your

fixtures in a Master/Slave configuration. Be sure the number 2 func-

tion switch is set to the on position for sound-active operation.

Produkt Specifikationer

Mærke:	American Audio
Kategori:	Ikke kategoriseret
Model:	Deco 250

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio Deco 250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret American Audio Manualer

American Audio DCD-PRO610 Manual

14 August 2025

American Audio Epsilon Manual

14 August 2025

American Audio Gobo Flash 4 Manual

14 August 2025

American Audio DJ Spot LED Manual

14 August 2025

American Audio CDG-350 Manual

14 August 2025

American Audio Warp Tri LED Manual

14 August 2025

American Audio ETR 1000R Manual

14 August 2025

American Audio SENSE8 Manual

14 August 2025

American Audio Mega Pixel LED Manual

14 August 2025

American Audio Accu Scan 250 Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta Studio Dry 2100 CV5330 Manual

14 August 2025

Conair InfinitiPRO 1000 Manual

14 August 2025

Philips Uv Sanitizer HX6907 Manual

14 August 2025

Rowenta SuperGrill GR451B Manual

14 August 2025

Daikin ALB05RBSNADBT01 Manual

14 August 2025

Philips SWS3685S Manual

14 August 2025

Crestron C2N-IRGW-1G Manual

14 August 2025

Voltcraft VC-OBD-9770 Manual

14 August 2025

Philips SB7S19S Manual

14 August 2025

Rowenta Gourmet OC3751 Manual

14 August 2025