Amerock H55445ORB Manual

Amerock Knagerække H55445ORB

Læs gratis den danske manual til Amerock H55445ORB (3 sider) i kategorien Knagerække. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Amerock H55445ORB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Installing New Cabinet Hardware
Step 1. Location of Cabinet Hardware
While there are no hard, fast rules for placement of a knob or pull on a cabinet door, most cabinet makers will locate them
approximately 3"-4" above the upper non-hinged corner on base cabinets, or the lower non-hinged corner on wall cabinets.
However, the decision is your to make!
Wall Cabinets Base Cabinets
Wall or
Base Cabinets
Drawers
Step 2. Mounting Cabinet Hardware
When drilling for a knob or pull, a 3/16" hole is recommended for most styles. The exception is pulls that have "studs".
A stud is simply an extension of the molded screw holes. If a pull has a stud, then a 1/4" hole is required with studs sitting
securely in the wood.
IMPORTANT Screw Information
Amerock® includes 8-32 x 1" long machine screws with most knobs and pulls because the typical cabinet door or drawer front
is 3/4" thick. This screw length should work in most applications. However, if your cabinet doors or drawer fronts are thicker
than 3/4", then you will need to use longer screws for mounting. Check the thickness of both a cabinet door and a drawer front
in your kitchen, as the thickness dimensions may not be the same. In general, the screw length(s) used should be 1/4" longer
than the thickness of your cabinet door or drawer front material. It is not uncommon for some drawers to be constructed with a
3/4" thick front attached to a 3/4" thick drawer box. In this situation, the total drawer thickness is 1-1/2", making a 1-3/4" long
screw necessary for mounting. These screws may be purchased from any hardware store. Please note that select hardware sold
by Amerock may include metric screws instead of UNC screws.
A. Mounting Pulls
Sizes Available
Pulls can be obtained in U.S. measurements as well as metric.
Amerock offers a broad range of sizes to choose from.
How to Choose the Right Size
• Take note of all sizes available.
• 3" is the most common size pull.
• Size is determined by measuring from hole to hole,
not by the length of the pull itself
Installation Tips
If you are using a pull, you will want to determine the hole center spacing of the pull. 3" hole centers are the most common,
however, Amerock offers a wide variety of sizes. You may want to create or purchase a durable template prior to drilling to
mark the mounting holes. This will help to ensure that they are parallel with the door or drawer edge and that they are the
same placement height on every cabinet. WARNING! An example is provided below, however, do not use this for drilling
purposes as printers may provide template distortions.
Common
Hole Center
Measurements
B. Mounting knobs
Sizes Available
Knobs can be obtained in a variety of sizes, shapes, and diameters. Amerock offers a broad range of sizes to choose from.
How to Choose the Right Size
There are no right or wrong sizes when it comes to selecting the appropriate knob size. Choose the size that looks best in
proportion to the size of your cabinet doors and drawers. A 1-1/4" or 1-3/8" diameter knob is the most popular.
To create a dramatic effect, consider using a large (1-1/2" diameter or greater) or small (1" diameter or smaller) sized knob.
Small sized knobs also work well on applications such as apothecary drawers, spice drawers, pullout cutting boards, etc.
Installation Tips
If you are installing a knob, it is suggested that you create or buy a durable template prior to drilling to mark the mounting hole.
This will help to ensure that the knob is positioned properly on the cabinet door or drawer front and that there is the same
placement height on every cabinet.
2-1/2 in.
2-3/4 in.
3 in.
3-1/4 in.
3-1/2 in.
96 mm
4 in.
128 mm

Produkt Specifikationer

Mærke: Amerock
Kategori: Knagerække
Model: H55445ORB

Har du brug for hjælp?

Hvis du har brug for hjælp til Amerock H55445ORB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Knagerække Amerock Manualer

Amerock

Amerock H55445ORB Manual

25 Januar 2025

Knagerække Manualer

Nyeste Knagerække Manualer

Ikea

Ikea BERGIG 405.981.01 Manual

27 Juli 2025
Ikea

Ikea BÄRFIS 505.271.27 Manual

27 Juli 2025
Ikea

Ikea BERGIG 206.164.98 Manual

27 Juli 2025
Ikea

Ikea BÄRFIS 605.502.02 Manual

27 Juli 2025
Ikea

Ikea HÖVOLM 105.000.59 Manual

19 Juli 2025
Ikea

Ikea TIPPVAGN 605.637.04 Manual

19 Juli 2025
Ikea

Ikea KLYKET 505.035.98 Manual

19 Juli 2025
Ikea

Ikea KNOPARE 705.038.37 Manual

18 Juli 2025
Ikea

Ikea KNOPARE 505.038.38 Manual

18 Juli 2025
Ikea

Ikea LUSTIGT 105.659.51 Manual

17 Juli 2025