Amprobe VP-600SB Manual

Amprobe Ikke kategoriseret VP-600SB

Læs gratis den danske manual til Amprobe VP-600SB (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Amprobe VP-600SB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

1. Voltage Sensor 2. Probe body 3. Battery Cap

SYMBOLS

Refer to the manual Dangerous Voltage

Double insulated Conforms to relevant

Australian standards.

Underwriters Labora-

tories.[Note: Canadian

and US.]

Do not dispose

of this product as

unsorted municipal

waste.

Complies with EU

directives

Battery

For Use by Competent Persons

Anyone using this instrument should be knowledgeable and trained about the

risks involved with measuring voltage, especially in an industrial setting, and the

importance of taking safet y precautions and of testing the instrument before and

after using it to ensure that it is in good working condition.

SAFETY INFORMATION

WARNING: Use extreme caution when testi ng live electrical cir cuits due to risk

of injury from electrical shock.

Warnings and Precautions

Do not exceed t he maximum overload limits (see speciﬁcations) nor the limits •

marked on the instrument it self. Never apply more than 600 V ac rms.

Observe the proper safety precautions when working with voltages above 30 •

VAC rms to avoid electrical shock hazard.

Before and after hazardous voltage measurements, test the detector on a •

known source such as line voltage to determine proper operation.

Never ground yourself when taking measurements. Do not touch exposed •

circuit elements.

Do not operate the instrument in an explosive atmosphere.•

Do not expose this product to rain or moisture. This increases the risk of ﬁre •

or electric shock.

Do not rely on this tester for detecting AC voltage on a shielded wire.•

Comply with local and national safety requirements.•

Use proper protective equipment as required by local or national authorities.•

INTRODUCTION

VP-600SB is an instrument for safely checking the presence of an AC volt age

without making any disconnections in cables, wall sockets, fuses, circuit breakers,

junction boxes, et c. No current ﬂow is needed for correct operation. When

voltage is detected, the tip will illuminate, and t he unit will also beep and vibrate.

OPERATION

Apply the plastic tip t o any connection point or move it along an insulated cable.

When an AC voltage is det ected, the red indicator in the plastic tip will illuminate.

A steady glow (not ﬂash), sound and vibration indicates that voltage is present. If

there is no indication, voltage could still be present. Operation may be affected

by differences in socket design and thickness and type of insulation.

Caution: If three phase equipment is being checked and one phase is open,

the voltage is conducted back to the defective fuse through the other fuses and

will give a faulty indication.

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the operation of the probe, the

following steps should be performed in order to isolat e the cause of the problem:

Check the battery. 1.

Review the operating instructions for possible mistakes in operating 2.

procedure.

Except for the replacement of t he batteries, repair of the voltage detector should

be performed only by a Factory Authorized Service Center or by other qualiﬁed

instrument service personnel. The front panel and case can be cleaned with a mild

solution of detergent and water. Apply sparingly with a soft cloth and allow to

dry completely before using. Do not use aromatic hydrocarbons or chlorinated

solvents for cleaning.

Battery Replacement

Use ﬂat blade screwdriver to remove the cap. Remove batteries and replace with

(2) AAA 1.5 volts alkaline batteries. Replace the cap.

SPECIFICATIONS

Operating voltage: 100-600 VAC

Operating Temperature: 5°C to +40°C (41°F to 104 °F); < 90% RH

Environment: < 2000m, indoor operation

Power: (2) AAA batteries 1.5 volts alkaline.

Dimensions: 132 x 28 x 23mm (5.2 x 1.1 x 0.9")

Weight: 49 gr(1.7 oz)

EMC: EN 61326-1:2006

Sensitivity: illuminates red, vibrates and beeps at 4mm (0.16") distance f rom a

wire carrying 120 VAC.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Your Amprobe product will be f ree f rom defects in material and workmanship for

1 year from the date of purchase. This warranty does not cover fuses, disposable

batteries or damage from accident, neglect, misuse, alteration, contamination,

or abnormal conditions of operation or handling. Amprobe’s warranty obligation

is limited, at Amprobe’s option, to refund of the purchase price, free of charge

repair, or replacement of a defective product . Resellers are not authorized to

extend any other warranty on Amprobe’s behalf. To obt ain service during the

warranty period, return the product with proof of purchase to an authorized

Amprobe Test Tools Service Center or t o an Amprobe dealer or distributor. See

Repair Section for details. This warranty is your only remedy . All other warranties

- whether express, implied or stat utory - including implied warranties of ﬁt ness

for a particular purpose or merchantability, are hereby excluded. Neither

Amprobe nor its parent company or af ﬁliates shall be liable for any special,

indirect, incidental or consequential damages or losses, arising from any cause or

theory. Since some stat es or countries do not allow the exclusion or limitation of

an implied warranty or of incidental or consequential damages, this limit ation of

liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration

should be accompanied by the following: your name, company’s name, address,

telephone number, and proof of purchase. Additionally, please include a brief

description of the problem or the service requested and include the test leads

with the meter. Non-warranty repair or replacement charges should be remitted

in the form of a check, a money order, credit card with expiration date, or a

purchase order made payable to Amprobe® Test Tools.

In-Warranty Repairs and Replacement – Al l Countries

Please read the warranty statement and check your battery before requesting

repair. During the warranty period any defective test tool can be returned to your

Amprobe® Test Tools distributor for an exchange for the same or like product.

Please check the “Where to Buy” section on www.amprobe.com for a list of

distributors near you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe® Test Tools Service

Center (see below for address).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United St ates and Canada should be sent to a

Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at your

point of purchase for current repair and replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 888-993-5853 Tel: 905-890-7600

Fax: 425-446-6390 Fax: 905-890-6866

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe® Test Tools

distributor for a nominal charge. Please check the “Where to Buy” section on

www.amprobe.com for a list of distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

Beha-Amprobe GmbH

In den Engemat ten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 – 0

*(Correspondence only – no repair or replacement available from this address.

European customers please contact your distributor.)

VP-600SB

Non-Contact Volt Probe

VoltProbe

CATIII 600V 100-600VAC

Produkt Specifikationer

Mærke:	Amprobe
Kategori:	Ikke kategoriseret
Model:	VP-600SB

Har du brug for hjælp?

Hvis du har brug for hjælp til Amprobe VP-600SB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Amprobe Manualer

Amprobe AD40B Manual

28 September 2024

Amprobe TMD-55W Manual

19 August 2024

Amprobe THWD-10W Manual

15 August 2024

Amprobe WT-20 Manual

13 August 2024

Amprobe VPC-10 Manual

12 August 2024

Amprobe TP110KA Manual

11 August 2024

Amprobe BAT-100 Manual

11 August 2024

Amprobe AT-4001-A Manual

4 August 2024

Amprobe FLASH-80 Manual

4 August 2024

Amprobe AC50A Manual

4 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ANCEL BD200 Manual

4 November 2025

Yamazen KSF-S34 Manual

4 November 2025

Hendi CombiTurbo 281277 Manual

4 November 2025

Uniprodo UNI_PBM_58 Manual

4 November 2025

Wimberley AP-603 Manual

4 November 2025

Essentiel B B-Hydro Brush Manual

4 November 2025

Cooler Master Mini 110 Manual

4 November 2025

ANCEL FX3300 ELITE Manual

4 November 2025

WALI AMM002-B Manual

4 November 2025

Eliminator Lighting Electro 64 BLED Manual

4 November 2025