AMT B1 Manual

AMT Ikke kategoriseret B1

Læs gratis den danske manual til AMT B1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om AMT B1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
www.amtelectronics.com www.amtelectronics.com
1 1
Safety precautions.
CAUTION! There are no user serviceable parts inside. Repair of the device can be
carried out only by qualified experts. If the device is not used it must be
disconnected from mains.
WARNING! In order to avoid fire or electric shock the device must not be exposed to
rain or moisture. Do not let water or other liquid get inside the device. Do not place
vessels such as vases filled with liquid on top of the device.
This symbol indicates important information related to the
d vice maintenance a d servicing containe in the
accompanying documentation.
e n d
Please read the instruction manual very carefully.
1. Keep the user's guide at hand.
2. Pay attention to warnings.
3. Follow all instructions related to device operation.
4. To clean the device, use only a dry cloth having disconnected
the device from mains prior to that.
5. Do not place the device near heat sources, keep it from direct
sunlight.
6. Lay the mains cable so that it is not stepped on and avoid its
contact with sharp corners, etc. If you use the plug or outlet for
switching the device off they should be easily accessible.
7. Use only additional devices and accessories recommended by
the manufacturer.
8. Disconnect the device from mains in case of thunder-storm or
when the device is not in use for prolonged time.
9. All works related to the device repair must be done only by
qualified service personnel.
10. WARNING! All service instructions are intended only for
qualified personnel in order to avoid electric shock; do not
carry out any repair works which are not described in the
instruction manual. Repair works must be carried out only by
qualified experts.
Contents
Important instructions 1
Complete set 1
Introduction 2
Before you start 2
Specifications 2
Controls 3
Top panel 3
Right panel 3
Only for qualified service personnel 3
Batteries installation 3
Audio connections and switching 3
Audio connections (1-channel preamp) 3
Audio connections (2-channel preamp) 3
Audio connections (4-channel preamp) 4
Block diagram 4
IMPORTANT INSTRUCTIONS!
NON-OBSERVANCE OF THE FOLLOWING INSTRUCTIONS CAN CAUSE
DAMAGE OF THE AMPLIFIER OR SPEAKERS. THE DAMAGES RESULTED
BY NON-OBSERVANCE OF THESE INSTRUCTIONS MAKE THE
WARRANTY VOID.
¾ After transportation or storage of the product under
negative temperatures, before switching the device on it is
necessary to leave the device under room temperature in
its original package for AT LEAST 2 hours!
¾ To connect the guitar preamp to other devices use only the
cables intended for such connections.
¾ You must not use other cables types such as speaker, etc.
SWITCHING ON the guitar preamp:
¾ Switch the device on ONLY AFTER YOU HAVE DONE all
audio connections!
¾ Before connecting the preamp to mains make sure that the
case, the connecting cable and the of the power adapter
have no damages such as cuts, cracks, dents, etc. and are
operational.
¾ To switch the preamp on first insert the low-voltage
connector of the power adapter into corresponding jack on
the rear panel of the guitar preamp and only then plug the
adapter into the mains outlet.
SWITCHING OFF the guitar preamp:
¾ To switch the preamp off first disconnect the power
adapter from mains and then disconnect its low-voltage
connector from the jack on the rear panel of the guitar
preamp.
COMPLETE SET
The complete set includes:
1. The guitar preamp 1
2. Instruction manual 1
3. Packaging 1
4. Warranty card 1
www.amtelectronics.com www.amtelectronics.com
2 2
INTRODUCTION
Legend Amps B-1 GUITAR PREAMP is intended for studio recording and live
shows.
“AMT Legend Amps” is a novelty revolutionary series of 1-channel
JFET preamps from AMT Electronics based on the completely new
approach to the guitar sound shaping.
The new series of guitar preamps is based on the technology using analog modeling
of physical processes occurring in the real vacuum triode during guitar signal
limitation.
It was realized due to the use of original circuitry design.
The overdrive channels construction corresponds to the processes occurring in real
tube-based devices.
Thanks to that we achieved formation of limitation, dynamics and range similar to
popular tube amplifiers.
While having minimum size and power consumption inherent in semi-conductor
elements, the effects of AMT Legend amps series possess a number of unique
properties characteristic to authentic tube preamps and amplifiers:
9 The preamps of AMT Legend Amps series provide great playing dynamics
characteristic to tube devices.
9 With limitation range similar to tube the effects of the series offer tremendous
density and power of sound. Using AMT Legend Amps you won’t feel the
necessity to cut out the most informative mid-frequencies that provide good
readability of your guitar in a mix.
9 AMT Legend preamps like tube ones provide gradual increase in the number
of limiting cascades with sensitivity enhancement.
9 The preamps of the series use passive circuits of tone formation fully
corresponding to the adjustments of original tube overdrives.
9 High output level of AMT Legend Amps effects (+10dB at maximum Level)
corresponds to tube preamps output levels. In this way you have the
adjustable signal level which allows to connect the preamp to any input
(RETURN, DIRECT, LINE etc.), including INPUT POWER AMP.
Architecture and features of AMT Legend Amps series preamps:
9 The preamps of the series are single-channel devices with passive bypass.
9 Legend amps have two outputs: direct OUT of the preamp and a separate
CAB.SIM line output.
The sound features of guitar preamps of “AMT Legend Amps” series:
AMT Legend Amps B-1
This preamp is intended for the admirers of a "clanking" sound with elastic punch.
Legend Amps B-1 emulates Sharp channel of such legend as Bogner Triple Giant.
AMT Legend Amps B-1 has the same sharpness, the same exactingness of sound
production, the same dynamism and the same sound brightness as the original.
AMT Legend Amps M-1
It emulates the "forefather" of the majority of amplifiers created for heavy styles,
legendary Marshall JCM800. As well as the legendary "forefather", AMT Legend
Amps M-1 is perfectly on friendly terms with boosters.
AMT Legend Amps P-1
This device emulates one of the most esteemed one for its super heavy sound -
Peavey 5150. The sound of AMT Legend Amps P-1 is monstrous density and
aggression and huge amount of gain.
AMT Legend Amps R-1
This device embodies all the power and grace of Red-channel overdrive used in one
of the most popular hi-gain amps by Mesa Boogie.
AMT Legend Amps S-1
The device is intended for the production of sound peculiar to «drive» channels of
Soldano amps. It is distinguished by specific type of overdrive: open, wide and at the
same time tough and dynamic.
AMT Legend Amps F-1
The basic sounds of AMT F-1 are classic amps of Fender Twin series. AMT F-1 offer
crystal clear sound with slight warm overdrive at high sensitivity.
AMT F-1 is a pioneer of the basic modules of the entire AMT LA series.
You can build around AMT F-1 your own complex of multi-channel preamp
consisting of AMT LA mono channels: P-1, B-1, M-1, R-1, S-1. The series is
constantly expanding to provide you with unique 100% analog tool forming the
sound of your guitar.
AMT F-1 is supplied with power adapter (unlike the other pedals of the series).
CAUTION!
The preamps of AMT Legend Amps series like many other
top-class devices are sensitive to power adapters’ quality.
We urgently recommend using either 9V battery 6F22 or the quality
adapter such as AC/DC Adapter SA09DC-9V 1,11A or
AC/DC Adapter SA12DC-12V 1,25A.
Before you start
For the purpose of transportation the device was carefully packed by the
manufacturer. However, if cardboard packaging is damaged, it is necessary to
check the device for the presence of external damages.
¾ In case of damages do not send the device to us, but
inform the seller and transport agency since otherwise you
lose the right to damage compensation.
¾ In order to avoid damages during storage and
transportation always use original packaging.
¾ Do not allow children to play with the device and
packaging materials.
¾ Please recycle all packaging materials in the way harmless
to environment.
¾ In order to avoid the device overheating provide sufficient
air flow, do not cover and do not place it near other heat-
generating devices.
¾ Operating the device next to powerful radio transmitters
and sources of high-frequency signals can lead to
significant sound distortion. In this case increase the
distance between the device and the transmitter and use
the screened cables for all interconnections.
WARNING!
Please be aware that high sound volume can harm your hearing
and / or to damage the speakers of your PA system. Before
switching the device on turn the controls "Volume" into
extreme left position (counter-clockwise). Always try to adhere
to moderate level of volume.
Specifications
Use only auxiliary devices and accessories
recommended by the manufacturer.
Input
Impedance 1,0 MOhm
Nom. sensitivity -20dB
Output
Output impedance 10 kOhm
Output signal level +10dB
CAB.SIM. output
Output impedance 10 kOhm
Output signal level -10dB
Power supply 6F22 battery
Voltageе DC 9V
Current consumption Approx. 6.0mA
Power adapter Recommended:
AC/DC Adapter SA09DC-9V 1,11A;
AC/DC Adapter SA12DC-12V 1,25A
Voltage DC 9V or DC 12V
Dimensions / Weight
Net dimensions (Wх хH D). 111х х58 73 mm.
Net weight (without battery) 0,23 kg.
Overall dimensions (WхHхD). Approx. 125х83х103 mm.
Weight (without battery) Approx. 0,3 kg.

Produkt Specifikationer

Mærke: AMT
Kategori: Ikke kategoriseret
Model: B1

Har du brug for hjælp?

Hvis du har brug for hjælp til AMT B1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret AMT Manualer

AMT

AMT B1 Manual

27 August 2024
AMT

AMT E1 Manual

27 August 2024
AMT

AMT M1 Manual

27 August 2024
AMT

AMT R1 Manual

27 August 2024
AMT

AMT S1 Manual

27 August 2024
AMT

AMT SS-20 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony

Sony RM-V202T Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025
Kohler

Kohler K-10124 Manual

15 Juni 2025
Planet Audio

Planet Audio P9900CPA Manual

15 Juni 2025
Levenhuk

Levenhuk LabZZ SP20 Manual

15 Juni 2025
Planet Audio

Planet Audio P62CP Manual

15 Juni 2025
Cranborne Audio

Cranborne Audio Carnaby 500 Manual

15 Juni 2025
Audio-Technica

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025
Stamos

Stamos SWG-WC-3D Manual

15 Juni 2025
Planet Audio

Planet Audio P350MB Manual

15 Juni 2025