AMT E1 Manual

AMT Ikke kategoriseret E1

Læs gratis den danske manual til AMT E1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om AMT E1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
www.amtelectronics.com www.amtelectronics.com
1 1
AMT LA E-1 – one-channel preliminary guitar amplifier.
Designed to be connected directly to power amplifier input
or RETURN connector.
SAFETY RULES
CAUTION! The unit contains no user-serviceable parts. Only
qualified professionals can carry out repair of the device.
WARNING! To avoid malfunctions, the device must not be exposed
to rain or moisture. The device interior must not be exposed to
water or other liquid. Do not place containers filled with liquids,
such as vases, etc. on top of the device.
This symbol indicates important information about the
operation of the device and its servicing as reflected in the
accompanying documentation.
Please read the instruction manual carefully.
1. Keep the instruction manual at hand.
2. Please pay attention to the warning signs.
3. Do not forget to follow all the instructions contained in the
manual.
4. Before cleaning the device unplug it from the power adapter.
Use only dry cloth to clean the device.
5. Do not place the device near heat sources; avoid direct
sunlight.
6. Lay the mains cord in such a way that it is not stepped upon.
Make sure it is not in contact with sharp angles etc. If the
mains plug or the socket of the adapter is used to switch the
device off, they must be easily accessible.
7. Use only auxiliary devices and accessories recommended by
the manufacturer.
8. Disconnect the device from the power adapter (when using
power adapter) during thunderstorm.
9. If you don’t use the device for a long time, please remove the
battery from the device.
10. Any works, related to the device repair must be carried out
only by qualified service personnel.
11. WARNING! All service instructions are intended exclusively for
qualified personnel. Do not carry out any repairs not described
in the instruction manual. The repair works must be carried out
only by qualified specialists.
Contents
Important instructions 1
Complete set 1
Introduction 2
Before you start 2
Specifications 2
Power adapter low-voltage connector contacts arrangement 2
Controls 3
Top panel 3
Right panel 3
Only for qualified service personnel 3
Battery installation (replacement) 3
Audio connections and switching 3
Audio connections (1-channel preamp) 3
Audio connections (2-channel preamp) 3
Audio connections (4-channel preamp) 4
Block diagram 4
IMPORTANT INSTRUCTIONS!
THE FAILURE TO OBSERVE THE FOLLOWING INSTRUCTIONS MIGHT
RESULT IN YOUR DEVICE DAMAGE. THE GUARANTEE IS VOID IF THESE
INSTRUCTIONS ARE NOT FOLLOWED.
¾ After transportation or storage of the device under low
temperatures keep the device inside its original packaging
under the room temperature for AT LEAST 2 HOURS before
using it!
¾ To connect the guitar preamp to other devices use
exclusively the cables intended for such connections.
¾ DO NOT use other types of cables e.g. speaker cables and
so on.
CONNECTION of the guitar preamp to the power adaptor:
¾ The connection to the power adapter is to be made only
when all other audio connections have been completed.
¾ Before connecting the guitar preamp to the power adapter
make sure that the housing, the cable and the mains plug
of the power adapter are intact: no cuts, cracks, dents etc.
and are in operative condition.
¾ In order to connect the preamp to the power adapter FIRST
insert the power adapter low-voltage connector to the
corresponding socket on the right panel of the preamp and
THEN insert the power adapter’s plug into the mains.
DISCONNECTION of the guitar preamp from the power adapter:
¾ To disconnect the guitar preamp from the power adapter
FIRST disconnect the power adapter’s plug from the mains
and THEN disconnect its low-voltage connector from the
socket on the right panel of the guitar preamp.
COMPLETE SET
The complete set includes:
1. The guitar preliminary amplifier 1
2. Instruction Manual 1
3. Packaging box 1
4. Warranty card 1
www.amtelectronics.com www.amtelectronics.com
2 2
INTRODUCTION
Legend Amps E-1 guitar preliminary amplifier is intended for both studio work and
live performances.
“AMT Legend Amps” is the new revolutionary series of 1-channel
JFET-based preamps from AMT Electronics, designed as a result of
totally different approach to the guitar sound formation.
In the basis of the new series of guitar preliminary amplifiers lies the technology of
analog modeling of the physical processes occurring within the real triode tube
during guitar sound clipping.
It became possible thanks to the application of authentic circuitry design solutions.
The overamplification channels structure complies with the processes occurring in
real tube-based devices. Due to that we managed to build the structure of sound
clipping, dynamics and scope very close to those in popular tube-based amplifiers.
Having minimum sizes and power consumption characteristic to semi-conductors,
the effects of AMT Legend amps series possess a number of unique features
inherent in full-scale tube-based preamps and amplifiers:
9 The preamps of the AMT Legend Amps series provide excellent playing
dynamics characteristic for full-scale tube-based amplifiers and are in no way
inferior to them.
9 With the clipping scope similar to the tube-produced one, the effects of the
series give you terrific density and power of sound. Using AMT Legend Amps
you won’t feel like cutting out the most informative middle frequencies, which in
turn will provide great readability of your guitar in any mix.
9 The preamps of AMT Legend Amps series, like tube preamps, provide players
with gradual increase of the number of clipping stages as sensitivity grows.
9 The preamps of the series use passive circuits of tone shaping completely
corresponding to the controls used in original tube-based overdrive.
9 The high level of the output signal in AMT Legend Amps (+10dB at max
position of Level) corresponds to the output signal levels of real tube-based
preamps. Thus, you have adjustable signal level allowing you to connect your
preamp to any input (RETURN, DIRECT, LINE and so on), including INPUT
POWER AMP.
The architecture and features of the guitar preamps of “AMT Legend
Amps” series:
9 The preliminary amplifiers of the series are one-channel devices with passive
bypass.
9 The devices of Legend amps series are equipped with 2 outputs: direct
preamp OUT and CAB.SIM - a separate output for connection to “line in”.
The sound character of E-1 guitar preamp (AMT Legend Amps
Series):
Legend Amps E-1 is the preliminary amplifier for the fans of “ ”juicy sound with
resilient mids. It emulates the Lead channel of such legend as ENGL Fireball.
AMT Legend Amps E-1 is the resilient, aggressive distortion, which ENGL amps are
famous for. The wide range of sensitivity adjustment allows you to receive classic
biting rock sound with minimum efforts. At bigger distortion the sound acquires
“ ”metallic colors with great sustain, bright flageolets and readability of even complex
chords at any distortion level characteristic for Engl amps.
CAUTION! The AMT Legend Amps series preamps, as any
other top class devices, are very demanding when it comes to
ower source quality. We insist that you use either a 9V battery
6F22 or the power adapter corresponding to the necessary quality
requirements (recommended: AC/DC Adapter SA09DC-9V 1.11A or
AC/DC Adapter SA12DC-12V 1.25A).
the p
Before you start
To ensure safe transportation the unit was carefully packed at the manufacturing
facility. However, if the packaging box is damaged, you should immediately inspect
the unit visually for the lack of external damage.
¾ If you detect any damages, please DO NOT send the device to
the manufacturer’s address, but notify the seller or
transportation company, otherwise you’ll lose your right to
compensation.
¾ In order to avoid damages during storage or transportation
please use the original packaging at all times.
¾ Do not allow children to play with the device or the packaging.
¾ Please recycle all packaging materials to avoid any harm to
environment.
¾ To avoid the device overheating provide sufficient air
circulation around it. Do not cover it and don’t place it close to
heat-emitting sources.
¾ Using the device near powerful radio transmitters and high
frequency sources might result in significant worsening of
sound quality. If this is the case, increase the distance
between the device and transmitter and use shielded
cables for all connections.
WARNING!
Please mind that high sound volume can damage your ears
and/or speakers. Before switching the device on turn VOLUME
control to the extreme left position (counter clockwise). Try to
stick to a moderate sound volume at all times.
Specifications
Use only auxiliary devices and accessories recommended by
the manufacturer.
IN Input
Impedance 1,0 MОhm
Nominal sensitivity -20dB
OUT Output
Output impedance 10kОhm
Output signal level +10dB
CAB.SIM. Output
Output impedance 10kОhm
Output signal level -10dB
Power supply Battery 6F22
Voltage DC 9V
Current consumption
A
ppro
x
. 6mA
Power adapter (optional) Recommended:
A
C/DC Adapter SA09DC-9V 1.11A;
A
C/DC Adapter SA12DC-12V 1.25A
Voltage DC 9V or DC 12V
Dimensions / Weight
NET dimensions (Wх хH D). 111х х58 73 mm
NET weight (w/o battery) 0.23 kg
GROSS dimensions (Wх хH D).
A
ppro
x
. 125х х83 103 mm
GROSS weight (w/o battery)
A
pprox. 0.3 kg

Produkt Specifikationer

Mærke: AMT
Kategori: Ikke kategoriseret
Model: E1

Har du brug for hjælp?

Hvis du har brug for hjælp til AMT E1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret AMT Manualer

AMT

AMT B1 Manual

27 August 2024
AMT

AMT E1 Manual

27 August 2024
AMT

AMT M1 Manual

27 August 2024
AMT

AMT R1 Manual

27 August 2024
AMT

AMT S1 Manual

27 August 2024
AMT

AMT SS-20 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MY500XT Manual

1 August 2025
Navman

Navman FOCUS150 GPS Manual

1 August 2025
Scheppach

Scheppach TW1000 Manual

1 August 2025
Navman

Navman MiVue 750 WIFI Manual

1 August 2025
Navman

Navman MiVue Drive FHD Manual

1 August 2025
Midea

Midea MEC64 Manual

1 August 2025
Navman

Navman MY50T Manual

1 August 2025
Navman

Navman M100 Manual

1 August 2025
Navman

Navman MiVue 770 SAFETY Manual

1 August 2025
Navman

Navman MiVue 790 Manual

1 August 2025