Wheel Brake Retractable Handle (Press the button on the retractable
handle and pull to extend)
Bottom Handle AC Outlet Button
LCD Screen Guide
Remaining Battery for Power Station and Expansion Battery
Overload Warning
This icon appears when a port is overloaded. The port will turn off to avoid any damage. Please remove the device causing overload.
Current Output Power
Current Input Power
Whole-Home Power Mode
USB-A Output Port
USB-C Output Port
Car Charging
IoT
Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the screen.
AC Charge and Voltage Frequency
Electrical Vehicle Charging
Number of Expansion Battery Connected
When the expansion battery is connected successfully, this icon appears on the screen.
Estimated Time to Fully Recharge
Estimated Time for Battery to Deplete
Low-Temperature Alert
When this icon shows, stop using the power station until the icon disappears.
High-Temperature Alert
When this icon shows, stop using the power station and let it cool down until the icon disappears.
Recharging Your Power Station
When your portable power station only has 1% battery remaining, the "Remaining Battery" indicator will icker to remind you to recharge.
AC Recharging (1800W Max)
Recharge your power station by connecting to a wall outlet with the AC charging cable.
Solar Panel Recharging (2400W Max)
Recharge your power station with a maximum solar input of 2400W.
The solar input voltage range for Anker SOLIX F3800 is 11-60V. Please ensure the voltage of
connected solar panels is within this range. Voltage exceeding 60V will damage the product.
If an extension cable is required to connect the solar panels to the portable power station,
purchase Anker SOLIX Solar Panel Charging Cable from the Anker official website. Connect it as
indicated by the dotted line in the diagram.
Car Recharging (120W)
Recharge your power station by connecting to a car's output port with the car charging cable (not included).