
EN
35-68
Balcony Solar PV System Installation Steps Overview
35
Components Overview
35-37
Solar Panel Tilt Mount Brackets
35
Solar Panel
35
Microinverter
36
Accessories
36-37
Pre-Installation
37-38
Selecting a Location
37
Measuring the Distance
38
Installation
39-67
On a Balcony (Below 1.2m/3.9ft)
39-49
Option 1: 30°, 35°, 40°, and 45° Inclination Angles
39
Option 2: 0° Inclination Angle 45
On a Balcony (1.2m/3.9ft or Above)
50-62
Option 1: 30°, 35°, 40°, and 45° Inclination Angles 50
Option 2: 0° Inclination Angle 57
On the Ground
63-67
LED Light Guide
68
DE
01-34
PV-Balkon-Solaranlage – Übersicht über die
Installationsschritte
01
Übersicht über die Komponenten
01-04
Halterungen für die Neigung von Solarpanelen
01
Solarpanel
01
Mikrowechselrichter
02
Zubehör
02
Vor der Montage
03
Einen Standort auswählen
03
Messen der Entfernung
04
Montage
04-33
Auf einem Balkon (unter 1,2m)
04-15
Option 1: Neigungswinkel von 30°, 35°, 40° und 45° 04
Option 2: Neigungswinkel von 0° 11
Auf einem Balkon (1,2m oder mehr)
16-28
Option 1: Neigungswinkel von 30°, 35°, 40° und 45° 16
Option 2: Neigungswinkel von 0° 23
Auf dem Boden
29-33
LED-Lichtführung
34
• Die PV-Solaranlage ist netzgekoppelt. Prüfen Sie, ob
dies in Ihrer Region erlaubt ist. Je nach Region kann eine
behördliche Genehmigung vor oder nach der Montage
erforderlich sein.
• Vergewissern Sie sich, dass die Verkabelung korrekt
ist und keine Drähte beschädigt oder eingeklemmt sind.
Wir hoen, dass diese Informationen hilfreich sind, um Ihnen die Montage zu
erleichtern. Wenn Sie weitere Hilfe benötigen, wenden Sie sich bitte an unseren
freundlichen und unkomplizierten Kundenservice.
We hope this manual helps you with the installation process. If you still need any
further assistance, our friendly and hassle-free service is always here for you.
Email: support@anker.com
Phone: (DE) +49 (800) 000 2522
Web: http://support.anker.com/de
T
• The solar PV system is grid-tied. Please check if it is
allowed in your area. Depending on the region, ocial
approval may be required before or after installation.
• Make sure the wiring is correct and no wires are
damaged or pinched.
T