Antari F-80 Manual

Antari Effekt maskine F-80

Læs gratis den danske manual til Antari F-80 (15 sider) i kategorien Effekt maskine. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Antari F-80, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

User Manual

Antari Fog Machine

Congratulations on the purchase of your new

ANTARI FOG MACHINE.

Introduction

Thank you for choosing an ANTARI Fog Machine. You now own a rugged and powerful

state-of-the-art machine. Prior to use, we suggest that you carefully read all of the

instructions. By following the suggestions found in this user manual, you can look forward to

the reliable and satisfactory performance of your ANTARI Fog Machine for years to come.

Please follow these operation, safety and maintenance instructions to

ensure a long and safe life for your fog machine.

Cautions

Danger of electric shock

♦ Keep this device dry.

♦ For inside use only. Not designed for outside use.

♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care

to determine that the unit is installed at the rated voltage.

♦ Always unplug your ANTARI Fog Machine before filling its tank.

♦ Keep fog machine upright.

♦ Turn off or unplug when not in use.

♦ This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the

housing, immediately unplug the unit and contact a service technician or your ANTARI

dealer before using it again.

♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service

personnel.

Danger of burns

♦ For adult use only. Fog machine must be installed out of the reach of children. Never

leave the unit running unattended.

♦ Never aim the output nozzle directly at people.

♦ Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during

operation.

♦ Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to

guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides

and top of the unit.

♦ Never aim the output nozzle at open flames.

♦ The output nozzle becomes very hot during operation (300 degrees C). Keep flammable

materials at least 50 cm away from the nozzle.

♦ Always allow your ANTARI Fog Machine to cool down before attempting to clean or

service it.

Danger of explosion

♦ Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.

Pay attention to all warning labels and instructions printed on the exterior of your ANTARI

Fog Machine

♦ Use only the high-quality, water-based fog liquid that your dealer recommends. Other fog

liquids may cause clogging or “spitting”.

♦ Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit

without liquid will cause damage to the pump as well as over-heating of the heater.

♦ If your ANTARI Fog Machine fails to work properly, discontinue use immediately. Drain all

fog liquid from the tank, pack the unit securely (preferably in the original packing material),

and return it to your ANTARI dealer for service.

♦ Always drain tank before mailing or transporting this unit.

♦ Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in

contact with skin or eyes, rinse thoroughly with water.

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has

arrived intact. Refer to the “Features” section for information on what items are included with

your model. If any equipment is missing contact your ANTARI dealer immediately.

Before beginning initial setup of your ANTARI Fog Machine, make sure that there is no

evident damage caused by transportation. In the event that the unit’s housing or cable is

damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI

dealer for assistance.

Setup

♦ Remove all packing materials from shipping box. Check that all foam and plastic padding

is removed, especially in the nozzle area.

♦ Place fog machine on a flat surface and remove fog liquid tank cap.

♦ Fill with ANTARI Fog Liquid or other high-quality water-based fog fluid. Any other types of

fluid can damage the unit. When filled, place cap back on liquid tank.

♦ Firmly attach the remote control cable to the proper input on the rear of the machine.

Operation

♦ Plug power cord into a grounded electrical outlet. If necessary, turn power switch on rear

of unit to “ON” position. Warm-up is complete when green lamp lights up on remote unit.

♦ To emit fog, press the appropriate button on the remote for the desired length of time.

♦ The remote unit’s lamp will cycle on and off as the machine re-heats to the proper

operating temperature.

♦ For further information on operating your ANTARI Fog Machine, see the section titled,

“Remote Control Operation”.

If your model includes a mounting bracket designed for overhead installation, it may be

installed at floor level or suspended overhead. If the unit is to be mounted using the bracket,

it is important that the fog does not shoot directly at any one’s face. Whatever installation

method you choose, do not allow the unit to have more than a 15 degree angle of inclination.

Important: Always monitor tank fluid level as you are fogging. Running a fog machine with

no fluid can permanently damage the unit.

Produkt Specifikationer

Mærke:	Antari
Kategori:	Effekt maskine
Model:	F-80

Har du brug for hjælp?

Hvis du har brug for hjælp til Antari F-80 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Effekt maskine Antari Manualer

Antari LCU-2S Manual

27 Januar 2025

Antari Z-800II Manual

27 Januar 2025

4 December 2024

6 September 2024

27 August 2024

19 August 2024

Antari Z-1500 MK2 Manual

18 August 2024

Antari Z-9 Manual

16 August 2024

Antari DNG-250 Manual

16 August 2024

Antari F-80 Manual

16 August 2024

Effekt maskine Manualer

Nyeste Effekt maskine Manualer

Blizzard Lighting Colorise Quadra Manual

2 April 2025

Blizzard Lighting Hypno Spot Manual

2 April 2025

Blizzard Lighting Blok 2 IP Manual

2 April 2025

Blizzard Lighting Blok 1 IP Manual

2 April 2025

Blizzard Lighting Stiletto I7 Manual

2 April 2025

Blizzard Lighting PixelStorm 240 Manual

2 April 2025

Midas Legend L1B Manual

1 April 2025

Blizzard Lighting HotBox Infiniwhite Manual

31 Marts 2025

Blizzard Lighting RokBox EXA Manual

31 Marts 2025

Blizzard Lighting Verismo Fresnel WW Manual

27 Marts 2025