Antari X-30 MK3 Manual


Læs gratis den danske manual til Antari X-30 MK3 (12 sider) i kategorien Effekt maskine. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Antari X-30 MK3, eller vil du spørge andre brugere om produktet?

Side 1/12
READ ANDSAVE THESEINSTURCTIONS
2009 AntariLighting&EffectsLtd.
X-30WIRELESSCONTROL MODULE
USERMANUAL
BEDIENUNGSANLEITUNG
UserManual
AntariX-30WirelessControlModule
Congratulationsonthepurchaseofyournew
A X-30ntari WirelessControlModule
UserManual 01
Thank you for choosing the Antari X-30. The transmitter and the
receiving unit serve for wireless control of Antari X-310, X-510, X-515, and X-530
fog machines. The system operates with the fixed UHF frequency 433.920 MHz. The
transmission range is approx. 50 m and depends on the local conditions.
The system is designed for indoor use only. Never
remove the serial barcode from the devices as this would make the guarantee void.
wireless control module
REV3
The transmitter
operates with a 12 V battery type 23A.
-Introduction
This product is in accordance with the R&TTE directive (Radio and Telecommunication
Technical Equipment) of the European Union and falls into equipment Class 1. In all EU
member countries, the operation of this wireless system is generally approved by the
national telecom regulatory authority. The system is license-free. In some countries
outside the EU, the operation of this wireless system may needs to be approved by the
national telecoms regulatory authority.
-Approval
Keep this device dry.
For indoor use only. Not designed for outdoor use.
Ideal operating temperature is between 0° and 40° Celsius.
No user serviceable parts inside. Refer to your Antari dealer or other authorized service
personnel.
For adult use only.
Never use aggressive cleansing agents or chemicals for cleaning.
If the remote control is not used for a longer period, please remove the battery. Dispose of
used batteries properly to save the environment.
Damage, caused by manual modifications on the device are not subject to warranty. If the
device is used for other purposes than originally intended, or if it is not correctly operated
or not repaired, the product may suffer damages and the guarantee becomes void.
-SafetyInstructions
X-30


Produkt Specifikationer

Mærke: Antari
Kategori: Effekt maskine
Model: X-30 MK3

Har du brug for hjælp?

Hvis du har brug for hjælp til Antari X-30 MK3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Effekt maskine Antari Manualer

Antari

Antari FT-70 Manual

4 December 2024
Antari

Antari F-7X Manual

6 September 2024
Antari

Antari S-120 Manual

27 August 2024
Antari

Antari MB-55 Manual

19 August 2024
Antari

Antari Z-1500 MK2 Manual

18 August 2024
Antari

Antari Z-9 Manual

16 August 2024
Antari

Antari DNG-250 Manual

16 August 2024
Antari

Antari F-80 Manual

16 August 2024
Antari

Antari S-600 Manual

16 August 2024
Antari

Antari ICE-101 Manual

16 August 2024

Effekt maskine Manualer

Nyeste Effekt maskine Manualer