Antec Atlas 550 Manual


Læs gratis den danske manual til Antec Atlas 550 (8 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Antec Atlas 550, eller vil du spørge andre brugere om produktet?

Side 1/8
Atlas 550 Quiet Mini Server Case
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
1
At Antec, we continually refine and improve our products to ensure the highest
quality. It’s possible that your new case will differ slightly from the descriptions
in this manual. This isn’t a problem; it’s simply an improvement. As of the date of
publication, all features, descriptions, and illustrations in this manual are correct.
Atlas 550 User’s Manual
Atlas 550 – Quiet Mini Server Case
This case comes with a TruePower Trio™ 550 Watt power supply unit (PSU).
It complies with the newest Intel® EPS12V specification. The PSU comes with a
main power switch. Make sure you turn the switch to the ON (I) position before
you boot up the computer for the first time. Normally, you won’t need to switch
to the OFF (O) position, since the PSU includes a soft on/off feature. This lets you
turn the computer on and off by using the soft switch on the computer case.
If the computer crashes and you can’t shut it down using the soft switch, you can
switch the main power to the OFF (O) position to shut the system down.
Then turn the switch back to the ON (I) position and reboot.
Antec TruePower Trio™ power supplies feature Power Factor Correction (PFC)
circuitry in accordance with European standard regulation code EN61000-3-2.
By altering the input current wave shape, PFC improves the power factor of the
PSU. A better Power Factor increases energy efficiency, reduces heat, improves
output voltage stability and prolongs the life of all equipment. The PSU’s high
efficiency design and quiet fan deliver not only a cleaner but also a quieter
operating environment.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking your time and the appropriate care when working with
it. Hurried or careless motion and use of excessive force, particularly when you are
working in areas you cannot see clearly, are but a few examples of activity that
should be avoided. Please use reasonable precaution.
Setting Up
1. Place the case upright on a flat, stable surface.
2. Loosen the thumbscrews from the right side panel and remove it by swinging
it out. : Do not use your fingernails to pry or lift the panels.Note
3. Inside the case you should see the power supply, some wiring with marked
connectors (USB, PWR etc.), the installed I/O panel, a power cord, a plastic
bag containing more hardware (screws, brass standoffs, etc.), and six drive
rails.
4. There are three plastic tabs on the left side of the bezel that fasten it to the
metal chassis. Release the tabs from the top down to release the bezel.
5. Swing the bezel open to about 45º, gently lift it up and it will come off
easily. Set the bezel aside in a safe place.
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the user’s manuals that come with those components.


Produkt Specifikationer

Mærke: Antec
Kategori: Computerbehuizing
Model: Atlas 550

Har du brug for hjælp?

Hvis du har brug for hjælp til Antec Atlas 550 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Computerbehuizing Antec Manualer

Computerbehuizing Manualer

Nyeste Computerbehuizing Manualer

Kolink

Kolink Void Rift Manual

12 Februar 2025
Kolink

Kolink Citadel Mesh Manual

12 Februar 2025
Zalman

Zalman S5 NEO Manual

5 Februar 2025
HYTE

HYTE Y60 Manual

24 Januar 2025
Kolink

Kolink SATELLITE Manual

5 Januar 2025
AeroCool

AeroCool P300C Manual

5 Januar 2025
AZZA

AZZA Celesta 340 Manual

5 Januar 2025