Antec Mini P180 Manual


Læs gratis den danske manual til Antec Mini P180 (8 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Antec Mini P180, eller vil du spørge andre brugere om produktet?

Side 1/8
Mini P180 / Mini P180 White
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
Ё᭛Փ⫼᠟ݞ
1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such your new case may differ slightly from the descriptions in this
manual. This isnt a problem; it’s simply an improvement. As of the date of publication,
all features, descriptions, and illustrations in this manual are correct.
Mini P180 / Mini P180 White User’s Manual
The Mini P180 is a small case that’s big on features. It is a professional case that
is highly configurable. For that reason, this case comes without a power supply.
Make sure you choose a power supply that conforms to the newest ATX standard
and is compatible with your motherboard.
Most ATX power supplies come with an on/off switch. Make sure you turn the
switch to the ON (I) position before you boot up your computer for the first time.
Normally, you won’t need to switch to the OFF (O) position, since the power supply
includes a soft on/off feature. This lets you turn your computer on and off by using
the soft switch on your computer case. If your computer crashes and you can’t
shut it down using the soft switch, you can switch the main power to the OFF (O)
position to clear the fault, then reboot.
Setting Up
1. Place the case upright on a flat, stable surface with the rear of the case facing you.
2. Remove the thumbscrews from the right side panel. Grip the panel at the top
and bottom and slide it towards you to open the case.
3. Remove the screws from the left side panel. Grip the panel at the top and
bottom and slide it towards you to remove the left side panel.
Note: Don’t use your fingernails to pry or lift the panels.
Inside the case you should see two separate chambers — the upper chamber
for motherboard, a 5.25” external drive and up to 5 hard drives; and the lower
chamber for power supply and two bays for 5.25” external drives. The upper
5.25” bay will accommodate a CD or DVD drive up to 170mm in length. You
will also find some wiring with marked connectors (USB, PWR etc.), drive
rails for 5.25” drives, installed I/O panel, and a 5.25” to 3.5” drive bay adapter.
Remove the middle hard disk cage to access the tool box which contains all
the hardware screws, spare silicone grommets, and standoffs.
Installing the power supply
1. With the case upright, install the power supply into the case.
Note: You can mount the power supply either side up. If you have a power
supply with a large fan, the fan should be on top once the unit is installed.
2. Between the two chambers a plastic structure lets you run cables between
the upper and lower chambers.
Disclaimer
This manual is intended only as a guide for Antecs Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the users manuals that come with those components.


Produkt Specifikationer

Mærke: Antec
Kategori: Computerbehuizing
Model: Mini P180

Har du brug for hjælp?

Hvis du har brug for hjælp til Antec Mini P180 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Computerbehuizing Antec Manualer

Computerbehuizing Manualer

Nyeste Computerbehuizing Manualer

Kolink

Kolink Void Rift Manual

12 Februar 2025
Kolink

Kolink Citadel Mesh Manual

12 Februar 2025
Zalman

Zalman S5 NEO Manual

5 Februar 2025
HYTE

HYTE Y60 Manual

24 Januar 2025
Kolink

Kolink SATELLITE Manual

5 Januar 2025
AeroCool

AeroCool P300C Manual

5 Januar 2025
AZZA

AZZA Celesta 340 Manual

5 Januar 2025