Antec NSK 2480 Manual


Læs gratis den danske manual til Antec NSK 2480 (8 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Antec NSK 2480, eller vil du spørge andre brugere om produktet?

Side 1/8
New Solution Series
NSK2480
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, your new case may differ slightly from the description in this
manual. This isn’t a problem; its simply an improvement. As of the date of publication,
all features, descriptions, and illustrations in this manual are correct.
New Solution Series User’s Manual
NSK 2480
Quiet Desktop Case
The Power Supply
NSK 2480 comes with an EarthWatts 380 Watt power supply. This universal
input, active PFC, single 80mm fan cooled power supply follows the ATX12V
version 2.2 specification, and includes dual +12V output rails that deliver safer
and more reliable output to your system’s components. EarthWatts power supplies
have achieved 80 PLUS® Certification, the latest independent standard in power
supply efficiency, and their higher energy efficiency reduces power consumption
by up to 25%, saving you money on your electricity bill. In addition EarthWatts
includes a variety of protective circuitry: OPP (over power protection), OVP (over
voltage protection), and SCP (short circuit protection).
The PSU comes with a main power switch. Make sure you turn the switch to the
ON (I) position before you boot up the computer for the first time. Normally, you
won’t need to switch to the OFF (O) position, since the PSU includes a soft on/off
feature. This lets you turn the computer on and off by using the soft switch on the
computer case. If the computer crashes and you can’t shut it down using the soft
switch, you can switch the main power to the OFF (O) position to shut the system
down. Then turn the switch back to the ON (I) position and reboot.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking your time and the appropriate care when working with
it. Hurried or careless motion and use of excessive force, particularly when you are
working in areas you cannot see clearly, are but a few examples of activity that
should be avoided. Please use reasonable precaution.
Setting Up
1. Place the case on a flat, stable surface.
2. Remove the thumbscrews from the back of the top panel. Slide the panel
towards the rear to remove it from the case.
3. Inside the case you should see the power supply, some wiring with marked
connectors (USB, PWR etc.), an installed I/O panel and a power cord.
The Triple Chamber structure
The case interior is divided into three separate chambers – the power supply
chamber, the motherboard chamber and the HDD chamber. This triple chamber
structure isolates heat and noise resulting in much quieter and cooler operation
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the users manuals that come with those components.


Produkt Specifikationer

Mærke: Antec
Kategori: Computerbehuizing
Model: NSK 2480

Har du brug for hjælp?

Hvis du har brug for hjælp til Antec NSK 2480 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Computerbehuizing Antec Manualer

Computerbehuizing Manualer

Nyeste Computerbehuizing Manualer

Kolink

Kolink Void Rift Manual

12 Februar 2025
Kolink

Kolink Citadel Mesh Manual

12 Februar 2025
Zalman

Zalman S5 NEO Manual

5 Februar 2025
HYTE

HYTE Y60 Manual

24 Januar 2025
Kolink

Kolink SATELLITE Manual

5 Januar 2025
AeroCool

AeroCool P300C Manual

5 Januar 2025
AZZA

AZZA Celesta 340 Manual

5 Januar 2025