Antec Performance One P190 Manual

Antec Computerbehuizing Performance One P190

Læs gratis den danske manual til Antec Performance One P190 (10 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Antec Performance One P190, eller vil du spørge andre brugere om produktet?

Side 1/10
P190
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ᳌
1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, it’s possible that your new case may differ slightly from the
description in this manual. This isn’t a problem; it’s simply an improvement. As of
the date of publication, all features, descriptions, and illustrations in this manual
are correct.
P190 User’s Manual
P190 – Advanced Super Mid Tower Case
This case comes with the unique Antec dual power supply system, NeoLink™.
Consisting of two power supply units –the NeoLink™ 650P and the NeoLink™ 550S
– the NeoLink™ system has an output 1,200 watts. You will need to connect the
NeoLink™ 650P to your motherboard and graphic card(s), and the NeoLink™ 550S
to your peripheral drives and accessories such as fans or system monitoring/
control devices. Both power supplies come with an on/off switch. Please be
sure to turn both power switches to the ON (I) position before you boot up your
computer for the first time – your computer will not boot with only one of the
NeoLink™ power supplies. Normally, you won’t need to switch to the OFF (O)
position, since the power supply includes a soft on/off feature. This lets you turn
your computer on and off by using the soft switch on your computer case. If
your computer crashes and you can’t shut it down using the soft switch, you can
switch the main power to the OFF (O) position on both power supplies to clear the
fault, then reboot.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking your time and the appropriate care when working with
it. Hurried or careless motion and use of excessive force, particularly when working
inside areas you cannot into see clearly, are but a few examples of activity that
should be avoided. Please use reasonable precaution.
Setting Up
1. Place the case upright on a flat, stable surface with the rear of the case
facing you.
2. Remove the thumbscrews from the right side panel. Grip the panel at the top
and bottom and swing it towards you to open the case.
3. Remove the screws from the left side panel. Grip the panel at the top and bottom
and swing it towards you to remove the left side panel.
Note: Do not use your fingernails to pry or lift the panels.
Inside the case you should see two separate chambers - the upper chamber for the
motherboard, externally accessible drives and hard drives; and the lower chamber
for the power supply and hard drives. You will also find some wiring with marked
connectors (USB, PWR etc.), the installed I/O panel, a box containing the top fan
spoiler and one set each of drive rails for a 5.25” drive and a floppy disk drive, and
Disclaimer
This manual is intended only as a guide for Antecs Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the users manuals that come with those components.


Produkt Specifikationer

Mærke: Antec
Kategori: Computerbehuizing
Model: Performance One P190

Har du brug for hjælp?

Hvis du har brug for hjælp til Antec Performance One P190 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Computerbehuizing Antec Manualer

Computerbehuizing Manualer

Nyeste Computerbehuizing Manualer

Kolink

Kolink Void Rift Manual

12 Februar 2025
Kolink

Kolink Citadel Mesh Manual

12 Februar 2025
Zalman

Zalman S5 NEO Manual

5 Februar 2025
HYTE

HYTE Y60 Manual

24 Januar 2025
Kolink

Kolink SATELLITE Manual

5 Januar 2025
AeroCool

AeroCool P300C Manual

5 Januar 2025
AZZA

AZZA Celesta 340 Manual

5 Januar 2025