APart CM6QFT Manual

APart Højttaler CM6QFT

Læs gratis den danske manual til APart CM6QFT (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 35 anmeldelser. Har du et spørgsmål om APart CM6QFT, eller vil du spørge andre brugere om produktet?

Side 1/4
INFO@APART-AUDIO.COM
The new contractors reference
WWW.APART-AUDIO.COM
The APart CM6QFT, the new contractor’s reference: reduces the install labour drastically.
The APart CM6QFT 2-way built-in ceiling loudspeaker can be used as a 16 Ohm or 100 Volt
loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel
of a standard 4 Ohm amplier. For 100 V use, the CM6QFT is equipped with a high-quality 6 Watt
100 Volt transformer with several power tappings. The loudspeaker has a 6 ½” paper cone woofer
what results in a very low distortion. To complete the sound a 1” tweeter has been integrated.
It makes the CM6QFT very suitable for the distribution of microphone calls and back ground
music. The housing is made of high quality ABS. The grille is made of steel. The standard colour
is white.
100V/1.5W : Black (common) – yellow
100V/3W: Black (common) – red
100W/6W: Black (common) – brown
16 ohm: rst disconnect the red and black wire between transformer and speaker. Connect the
speaker line to the free wire end on the speaker. Black = common, red = signal.
Patented Quick Fit system breaks all speed records
No screws : x and nish with 4 clicks only
Self adjusting clamp strength
Allowed board tickness : 12.5 to 29 mm
Discrete and stylish
Ultra thin plastic edge
Smooth at design
Strong metal grill


Produkt Specifikationer

Mærke: APart
Kategori: Højttaler
Model: CM6QFT

Har du brug for hjælp?

Hvis du har brug for hjælp til APart CM6QFT stil et spørgsmål nedenfor, og andre brugere vil svare dig