APart EN-SPH5T16-W Manual

APart Højttaler EN-SPH5T16-W

Læs gratis den danske manual til APart EN-SPH5T16-W (1 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om APart EN-SPH5T16-W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

EN-SPH5T16-WSPHERE SPEAKER

The Apart-Audio EN-SPH5T16-W is a compact sphere speaker with ABS housing (Ul94 HB) (RAL 9010 equivalent), equipped with a high efficiency full range speaker

and a multitap 100 volt transformer, all certified according EN 54-24. The unit is has a ceramic speaker line connector block and thermal fuse.

Popular applications: background music, microphone calls (paging) and evacuation systems.

The highlights are: ceramic connector block, thermal fuse.

Technical specifications

Speaker type Coated paper cone

Woofer size

5 inch

Dimensions (Ø x d) 185 x 157 mm

Colour RAL 9010

100 volt transformer power taps

16 / 8 / 4 watts

Frequency response (-10 dB, IEC268-5) 110 - 16500 Hz

Frequency range 90 - 17000 Hz

Dispersion angle -6 db, 500 Hz / 1 kHz / 2 kHz / 4 kHz

360° / 196° / 132° / 171°

SPL 1W / 1m (IEC268-5)

86.5 dB

SPL 1W / 4m (IEC268-5) 74.5 dB

SPL Pmax / 4m (IEC268-5) 86.5 dB

SPL Pmax / 4m (IEC268-5)

98.5 dB

Sensitivity EN54-24, 1W / 4m

IP classification 35

Chassis & grille material ABS plastic

Mounting instructions

1. Connect the speaker line cable to the ceramic block inside cable cover.

2. Attach the sphere speaker to a hook in the ceiling using the cable strain relief.

You can adjust the required cable length by sliding the strain relief over the

cable.

3. The required power can be changed by connecting another transformer

wire.

See the label on the speaker. The transformer wires not in use must be

electrically isolated to avoid short circuits. Default power = 16 watt.

4. Slide the cable cover against the ceiling.

EN 54-24

certified

Safety precautions

Warranty info

Legal info

• Keep this manual for future reference.

• When making the hole in your mounting panel to mount the Apart

speaker, make sure there is sufficient clearance behind the panel

(no obstructions like A/C channels, power lines etc, ...).

• Take care of your speaker wires, they should be free of damage. Damaged

speaker wires may result in poor sound quality and can damage amplifiers.

• Only use accessories specified by the manufacturer.

• Make sure the mounting panel can support the speaker's weight.

• Use a sufficient amount of speakers to avoid dead spots.

• No main power shall be connected to the loudspeakers, doing so will

damage the speaker.

• This apparatus should only be serviced by qualified personnel. If not

serviced by qualified personnel, warranty may be void.

• Use cable of the right gauge, certainly for long runs.

• Use cables with clear color indication and maintain polarity throughout

the whole system.

• Avoid loud feedback from microphones, this can damage your speaker.

• Please check the unit's condition after unpacking. If the outside of the

carton box has been damaged, inform your shipper immediately.

Apart Audio warrants this product to be free of defects in material and

workmanship for a period of one year for parts and for a period of one year

for labor from the date of original end-user purchase. This warranty is valid

only for the original end-user and cannot be transferred.

During the warranty period Apart Audio or one of its authorized service

partners shall either repair or replace any product, free of charge, that proves

to be defective on inspection by Apart Audio or its authorized service

representative.This warranty does not include, damages or product faults due

to abuse, misuse or faulty installation.

Audioprof nv

Industriepark Brechtsebaan 8 bus 1, 2900 Schoten - Belgium

Company names, product names and trademarks are property of their

respective owners. Apart-Audio specifications are subject to change without

notice.

Certificate No.: 1438/CPD/XXXX

73.0 dB

Produkt Specifikationer

Mærke:	APart
Kategori:	Højttaler
Model:	EN-SPH5T16-W
Bredde:	- mm
Dybde:	157 mm
Vægt:	1600 g
Produktfarve:	Hvid
Driftstemperatur (T-T):	-20 - 80 °C
Husmateriale:	Acrylonitrilbutadienstyren
Frekvensområde:	90 - 17000 Hz
Forbindelsesteknologi:	Ledningsført
Højttaler, placering:	Kan monteres på væggen
Diameter:	185 mm
Bashøjttaler:	Ja
Woofer diameter (britisk mål):	5.25 "