APart H20-G Manual

APart Højttaler H20-G

Læs gratis den danske manual til APart H20-G (1 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om APart H20-G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

SETTING POWER IMPEDANCE

1 2.5 WATTS 4K Ω

2 5 WATTS 2K Ω

3 10 WATTS 1K Ω

4 20 WATTS 500 Ω

5 OFF OFF

6 20 WATTS 8 Ω

●Type : Compression driver horn speaker

● Material : high impact ABS

● Standard colour : gray RAL7035

● Rated power RMS : 20 W / 100 volt

● Music power RMS : 30 W / 100 volt

● Transformer power taps by rotary switch :

2.5 – 5 – 10 – 20 W / 100volt

● Rated power RMS : 20 W / 8 ohm

● Music power RMS : 30 W / 8 ohm (lo-cut)

● Impedance: 100 volt / 8 ohm

● Cable length : approx. 40 cm

● Dimensions Outside Ø : 200 mm x length : 232 mm

● Weight including bracket : 1.36 Kg

● Mounting holes : 3 x Ø 6.5 mm

The H20 is a powerfull weatherproof industrial horn loudspeaker with compression driver.

This hornspeaker offers you a high sound pressure ideally suited for speech and the repro-

duction of alarm signals. Ideal for long-distance and outdoor use. The H20 is made out of high

impact ABS, supplied with a stainless steel bracket to avoid corrosion. The loudspeaker is

equipped with a high quality 100 volt transformer with several power taps, and can be used

in 8 ohm systems as well. The APart technology avoids any overload of your amplier by

controlling the impedance with the unique IMC protection device inside.

20 20 10 10 5 5 2.5 2.5+

++ + + + +75 Watt =

120Watt Amplier

Amplier power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

A stainless steel mounting bracket for mounting is included in the packing. The bracket allows you to rotate the speaker

over a range of more than 180 degrees. Securely mount the bracket to a wall or other solid surface. Connect the

speaker line with the included speaker wire and make sure that all connections are weather proof. The desired power

can be selected with the rotary switch at the back of the unit.

H20-G_Manual.indd 1 11/5/08 11:28:50 AM

Produkt Specifikationer

Mærke:	APart
Kategori:	Højttaler
Model:	H20-G

Har du brug for hjælp?

Hvis du har brug for hjælp til APart H20-G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler APart Manualer

8 December 2024

8 December 2024

8 December 2024

8 December 2024

2 Oktober 2024

1 Oktober 2024

30 September 2024

APart SDQ8T-BL Manual

19 September 2024

APart CM20T Manual

15 September 2024

APart SDX5-BL Manual

11 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Fiodio F-130 Manual

14 Juni 2025

HEYSONG Bubble Manual

14 Juni 2025

ANCOBER ACB-001 Manual

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

iFox Creations iF012 Manual

14 Juni 2025

MUZEN MW-P1I Manual

14 Juni 2025

Tracer Quanto 2.0 Manual

14 Juni 2025