WWW.APART-AUDIO.COM
2
Please read this manual before using the product. This manual provides you with
the information necessary to ensure a seamless installation and the best possible
sound quality.
Thanks for purchasing our MPH31-G speaker, a Music Projection Horn speaker
especially designed for outdoor back ground music, but also applicable on any
other location where you may want to benefit from the sturdy housing and IP54
rating. The APart MPH31-G has been designed and engineered in our Belgian
head quarters. The MPH31-G operates on 100V or low impedance systems
and can be configured in 30W, 15W, 7.5W and 4W for 100V operation with a
simple and easy accessible switch. Lo-Z impedance is 8 ohms. The design is kept
deliberately discrete in order not to draw attention. A well appreciated feature for
the installers is that you don´t need to open the cabinet to connect the speaker
wires.
•High speech intelligibility and balanced sound for music and speech reproduction.
•Efficient horn for covering extended distances.
•Coated aluminum mounting bracket for wall or ceiling mounting.
•Approx. 85 cm speaker wire, already connected.
•Rotary power selector: 30W, 15W, 7.5W, 4W and 8 ohms.
•ABS plastic housing.
•Keep this manual for future reference.
•Clean only with dry cloth
• Take care of yo ur speaker wires and protect them from possible damage.
Damaged speaker wires may cause poor sound quality and could damage the
amplifiers.
•Only use accessories specified by the manufacturer
•Make sure the mounting place can support the weight of the speakers.
•Use a sufficient amount of speakers for good sound coverage.
• No main power shall be connected to the loudspeakers in order to prevent
damage to the speaker.
• This apparatus should only be serviced by qualified personnel. Otherwise
warranty might be void.
•Use cable of the right gauge, certainly for long runs.