APart SDX3T-SLV Manual

APart Højttaler SDX3T-SLV

Læs gratis den danske manual til APart SDX3T-SLV (1 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om APart SDX3T-SLV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

SURFACE MOUNT LOUDSPEAKER

SWITCH POWER IMPEDANCE AMPLIFIER

1 6 Watt 1.6KΩ 100 Volt

2 3 Watt 3.3KΩ 100 Volt

3 1.5 Watt 6.6KΩ 100 Volt

4 OFF OFF OFF

5 16Ω / 40 Watt 16Ω HiFi amp

SDX3T

WWW.APART-AUDIO.COM INFO@APART-AUDIO.COM

• type : 2-way hiFi Pro, sealed box

• woofer : 3,2” CP type

• tweeter : 1” mylar ferro cooled

• protection : system auto-reset 1-guard

• impedance : 16Ω

• 100Volt trafo selector: 6-3-1,5W-OFF-16Ω

• RMS power low-imp.

AES rated : 30 Watts

music - program : 40 Watts

dynamic peak : (lo-cut)70 Watts

SPL 1 watt / 1 m : 86dB

SPL max peak : 104dB

• Freq range : 90 - 20000 Hz

• dispersion : 120° H x 100° V

• IP rating : 54

• enclosure material : enforced PolyPlastic

• bracket included : swivel ball type

• dimensions (h x w x d) : 152 x 105 x 104

• weight : 0,85 Kg

Technical Specifications

The SDX3T 2-way design cabinet loud-

speaker is loved by every interior designer

and architect for its small dimensions and perfect sound

quality. The loudspeaker can be used as a 16Ω or 100V

loudspeaker. In 16Ω use, you can connect up to 4

loudspeakers in parallel on each channel of a standard

4Ω amplifier. For 100V use, the loudspeaker is equipped

with a high quality 6 Watt transformer with several power

taps. Further, the SDX3T is equipped with an auto-reset

protection system. It makes the SDX3T loudspeaker very

suitable for the distribution of background music or

microphone calls. The loudspeaker comes standard with

a swivel ball type bracket. The SDX3T loudspeakers can

be used outdoor. However, be aware of the fact that the

loudspeaker terminals are not protected and that the grill

is made of plasticized painted metal. This means direct

exposure to rain or water is not recommended. In case

this is really needed, we recommend to use the APart

MASK loudspeaker series.

Power Tappings

6 6 6 3 3 3 1.5 1.5++ + + + + +30 Watt =

40 Watt Ampliﬁ er

Ampliﬁ er power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’ampliﬁ cateur doit etre plus élevée que la puissance totale des haut parleurs.

100 Volt Technology

16 ohm Technology

16Ω

16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω

4Ω 4Ω

Produkt Specifikationer

Mærke:	APart
Kategori:	Højttaler
Model:	SDX3T-SLV
Type:	I væggen/på væggen/i loftet højttalere
Vægt:	850 g
Produktfarve:	Sølv
Udgangseffekt (RMS):	35 W
Dimensioner (BxDxH):	105 x 104 x 152 mm
Materiale:	Plast
Frekvensområde:	90 - 20000 Hz
Impedens:	16 ohm (Ω)
Lyd-output kanaler:	2.0 kanaler
Diskanthøjttaler:	Ja
Peak Music-Udgangseffekt (PMPO):	50, 70 W
Diskant diameter:	25.4 mm
Woofer diameter:	81.3 mm