APC ACRC301H Manual

APC Ikke kategoriseret ACRC301H

Læs gratis den danske manual til APC ACRC301H (64 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 195 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 98 anmeldelser. Har du et spørgsmål om APC ACRC301H, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/64

InRow®Chilled Water Air Conditioners (High

Temperature)

ACRC301H

Service Manual

990–5190A

Release Date: October 2021

www.se.com

Legal Information

The Schneider Electric brand and any trademarks of Schneider Electric SE and its

subsidiaries referred to in this guide are the property of Schneider Electric SE or its

subsidiaries. All other brands may be trademarks of their respective owners.

This guide and its content are protected under applicable copyright laws and

furnished for informational use only. No part of this guide may be reproduced or

transmitted in any form or by any means (electronic, mechanical, photocopying,

recording, or otherwise), for any purpose, without the prior written permission of

Schneider Electric.

Schneider Electric does not grant any right or license for commercial use of the guide

or its content, except for a non-exclusive and personal license to consult it on an "as

is" basis. Schneider Electric products and equipment should be installed, operated,

serviced, and maintained only by qualified personnel.

As standards, specifications, and designs change from time to time, information

contained in this guide may be subject to change without notice.

To the extent permitted by applicable law, no responsibility or liability is assumed by

Schneider Electric and its subsidiaries for any errors or omissions in the informational

content of this material or consequences arising out of or resulting from the use of the

information contained herein.

This manual contains general information, safety instructions, and guidance. Updates

may be published from time to time and are available upon request. This manual is

not a substitute for the user conducting a detailed operational and site-specific

development plan.

This product is for industrial use only. It should only be used for the functions for

which it has been designed as set out in this manual. User must evaluate and take

adequate precautions to address risks associated with use of this product in

environments and/or processes not specifically addressed in this manual (e.g. heavy

industry, medical, marine environments, railway, etc.).

This product should be installed, configured, used, serviced, maintained, replaced or

have similar work carried out on it only by suitably qualified, trained, experienced and

competent personnel who hold any necessary authorizations (e.g. licenses, permits

or certifications) to perform such work.User must ensure that all work is carried out in

compliance with the manufacturer’s instructions (including the product labels/

markings, technical specification manual, installation manual, and operation and

maintenance manual) and with all applicable laws, regulations, standards and

guidance (including standards and guidance applicable to the installation location).

All work must be carried out in a way that does not give rise to danger and using

appropriate personal protective equipment (PPE).

Schneider Electric shall not be responsible for any works carried out by anyone other

than Schneider Electric; or for integration or use of the product with other products

(including spare parts and software) that are neither approved nor provided by

Schneider Electric for such purposes; or for any non-Schneider Electric software,

firmware, information or memory data contained in, stored on, or integrated with this

product.

To the maximum extent permitted by applicable law, neither Schneider Electric nor

any of its affiliates shall be liable for any claims, costs, losses, damages, death or

injuries arising out of the improper use of this product or any failure to comply with

any of the above requirements.Schneider Electric’s quality management system is

ISO 9001 certified and the products are marked

Produkt Specifikationer

Mærke:	APC
Kategori:	Ikke kategoriseret
Model:	ACRC301H
Bredde:	300 mm
Dybde:	1095 mm
Højde:	1991 mm
Vægt:	210000 g
Produktfarve:	Sort
Pakkevægt:	220000 g
Pakkedybde:	1137 mm
Pakkebredde:	746 mm
Pakkehøjde:	2118 mm