APC AR8123BLK Manual

APC Skab AR8123BLK

Læs gratis den danske manual til APC AR8123BLK (4 sider) i kategorien Skab. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om APC AR8123BLK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

100-lb Sliding Shelf — AR8123

990-0816 1/4 8/00

Overview

The 100-lb Sliding Shelf (AR8123) mounts into an American Power Conversion (APC) NetShelter

enclosure. The Sliding Shelf:

• Holds servers and peripherals weighing up to 100 pounds

• Slides forward for access to mounted equipment

• Has adjustable rails (28–40 in.)

• Can be mounted upside down to function as a tray

• Comes with four friction pads for securing your equipment to the shelf

• Is ready for use with the APC Cable Management Arm (AR8129)

Inventory

Item Qty Figure

Sliding Shelf 1

Stationary Rail 2

Moveable Rail 2

M6 Caged Nut 8

M6 Plastic Cup Washer 8

M6 × 16 mm Pan Head

Slotted/Phillips Screw

M6 Flanged Nut 4

Friction Pad 4

2/4

Tools Required

•Screwdriver (flat head)

•Pencil

Mounting Instructions

Step Action Figure

1 Choose the location for the Sliding Shelf on the

vertical mounting rails of the enclosure. Using a

pencil, mark the bottom mounting hole of the

chosen U-space on the front and rear vertical

mounting rails. (One U-space consists of a notched

mounting hole and one hole immediately above and

below it.)

Caution: Plan to place heavier components

towards the bottom of the enclosure.

2 Install a caged nut in the top and bottom mounting

holes of the U-space chosen in Step 1. Repeat for

each of the four vertical mounting rails.

Caution: Install the caged nuts horizontally,

as pictured; that is, the ears of each caged

nut should engage the sides of the

mounting hole, not the top and bottom.

3 Assemble the adjustable rails:

A. Slide a moveable rail into a slide-stationary

rail assembly.

B. Using two flanged nuts, fasten the rails loosely

enough to allow them to slide.

C. Repeat for the other adjustable rail.

Produkt Specifikationer

Mærke:	APC
Kategori:	Skab
Model:	AR8123BLK
Type:	Stativhylde
Tænd-/slukkontakt:	Ingen
Bredde:	445 mm
Dybde:	- mm
Højde:	44 mm
Vægt:	13180 g
Antal pr. pakke:	- stk
Produktfarve:	Sort
Pakkevægt:	17730 g
Pakkedybde:	89 mm
Pakkebredde:	838 mm
Pakkehøjde:	813 mm
Husmateriale:	Metal
Harmoniseret systemkode (HS):	85389099
Styrehjul:	Ingen
Indgangsspænding:	- V
Låsning:	Ingen
Størrelse:	- "
Indbygget ventilator:	Ingen
Tykkelse af materiale:	- mm
Rackkapacitet:	1U
Montering - dybde (maks):	40 mm
Dybde (maks.):	721 mm
Montering - dybde (min):	28 mm
Forlængelsesarm (max.):	- mm
Brugbar bredde:	- mm