Congratulations, you have purchased one of the fi nest
quality aquariums available. This product will give you
many years of excellent service when installed and
maintained correctly.
Getting started:
WARNING: the aquarium alone even when empty
may weigh up to 150KG. It must be lifted by at least
two capable people. Please read all instructions for
all appliances before commencing installation.
Step 1: Cabinet set up: please follow the set up
instructions for the cabinet enclosed.
Step 2: Preparing the aquarium: remove all packaging
from aquarium. Check carefully for any signs of damage
to glass and structure. We suggest cleaning the tank
inside before positioning on the cabinet. (see cleaning
instructions below). NOTE: the aquarium has a
protective mat underneath the tank. This must stay
there to protect the glass aquarium. Non use of this
mat invalidates the guarantee.
Step 3: Setting up the lighting system: once aquarium
is in position. (see set up of lighting) Check lighting
functions correctly. If you have chosen to change the
colour spectrum of your light tubes see (changing your
light tubes), do this while the lights are not positioned
on the aquarium.
TOP TIP: we suggest removing the lighting when fi lling
and landscaping the aquarium to avoid possibilities of
accidental damage.
GENERAL SAFETY NOTICE
It is absolutely imperative that you ensure this cabinet
and aquarium is installed upon level fl ooring. It is also
a prerequisite that. you ensure the fl ooring upon which
it is positioned is able to support the weight of this
aquarium which could be up to 1000kg including water
and decorations. Installation upon uneven fl ooring will
result in poor distribution of weight. Damages to the
aquarium, cabinet or equipment and damages caused
by leaks due to improper or uneven installation are
not covered by the guarantee with this product. We
recommend against aquariums above 150KG being
installed on 2nd story fl oorboards.
Connecting your appliance to the mains electricity
supply - Country specifi c instructions.
United Kingdom Only
The plug supplied with this product is a sealed plug
and we do not recommend removing or changing it.
However, should the need arise, only a suitable plug
should be connected using the following diagram 1
An approved earth leakage circuit breaker (RCCB) or
otherwise known as an Residual circuit current device
(RCCD) must be also fi tted in the supply line.
IF YOU ARE IN ANY DOUBT ABOUT INSTALLING
YOUR APPLIANCE YOU SHOULD CONSULT A
QUALIFIED ELECTRICIAN.
Red or Brown
Blue or Black
Green with a
Yellow Stripe
Diagram 1
LN
