Argox AS-8150 Manual


Læs gratis den danske manual til Argox AS-8150 (123 sider) i kategorien Stregkodescannere. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Argox AS-8150, eller vil du spørge andre brugere om produktet?

Side 1/123
NOTICE:
This equipment has been tested and complied with
the limits for a Class a digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful
interface when the equipment is operated under a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interface to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interface in
which case the user will be required to correct the
interface at his own expenses.
Note: All brands and trademarks shall belong to their
respective owner.
Note: Specification is subject to changes without
notice.
This device complies with Part 15 of the FCC Rules.
Operation shall be subject to the following two
conditions:
(1) This device may not cause harmful interface, and
(2)
This device must accept any interface received,
including interface that may cause undesirable
operation.
Using the ArgoxScan
8110/8120/8150/8250/8310/8312
The ArgoxScan can automatically scan barcode at a distance.
Simply aim and pull the trigger. Code scanning is performed
along the center of the light bar emitted from the reading
window. This bar must cover the entire code.
Successful scanning shall be obtained by tilting the scanner
with respect to the barcode to avoid direct reflections that
impair the reading performance, especially for 2D barcode.
Recommended Steps
When the required settings have been configured, all settings
are stored in non- volatile memory of scanner after reading
EXIT Label. Recommended steps are as follows.
1) Set right host interface for your scanner.
(The scanner is in factory default shown as bold label)
2) Set interface to optimize protocol of scanner with your
host in interface section.
3) Set system control of scanner, such as specific
adjustments double confirm, power saving, indicator
and scanning mode which you prefer usage in system
control section.
4) Set code options of scanner for your usage in code
option section. You must make sure to enable the
symbology first, then Min./Max. code length, code ID
checksum and truncate digits are also converted.
5) Set string format of the scanner, such as preamble,
postamble Prefix, suffix, code ID and code name
transmission for your application in string format
section.
Note: If still not work properly. Please contact your dealer for
further information.


Produkt Specifikationer

Mærke: Argox
Kategori: Stregkodescannere
Model: AS-8150
Type: Håndholdt stregkodelæser
Vægt: 160 g
Produktfarve: Hvid
Opbevaringstemperatur (T-T): -40 - 60 °C
Relativ luftfugtighed ved drift (H-H): 5 - 90 %
Strømforbrug (standby): 0.6 W
Strømforbrug (typisk): 1.275 W
Driftstemperatur (T-T): 0 - 45 °C
Scanner type: 1D
Husmateriale: Gummi
Kabler inkluderet: USB
Forbindelsesteknologi: Ledningsført
Certificering: CE, FCC, CCC
LED-indikatorer: Ja
Strømkilde type: USB
Bæredygtighedscertifikater: RoHS
Indgangsspænding: 5 V
Sensortype: CCD
Standard grænseflader: USB
Bølgelængde: 660 nm
Strømforbrug: 255 mA
Maksimal skanningsbredde: 120 mm
Opløsning på optisk sensor: 2048 pixel
Læsehastighed (maks.): 200 læs/sek.
Yaw læsningsvinkel: 0 - 75 °
Understøtter lineær (1D) stregkoder: GS1-128 (UCC/EAN-128)
Understøtter matrix (2D) stregkoder: PDF417
Arbejdsafstand: 250 mm
Lysniveauer (direkte sollys): 0 - 60000 Lux

Har du brug for hjælp?

Hvis du har brug for hjælp til Argox AS-8150 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Stregkodescannere Argox Manualer

Argox

Argox AS-8150 Manual

6 Juli 2024

Stregkodescannere Manualer

Nyeste Stregkodescannere Manualer