ART 406 Manual

ART Hovedtelefonforstærker 406

Læs gratis den danske manual til ART 406 (2 sider) i kategorien Hovedtelefonforstærker. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om ART 406, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ART Model 406 Six

Channel

Headphone Amplifier

The ART Model 406 Six Channel Headphone Amplifier addresses the basic requirements for professional headphone mixing. It’s a

great processor for professional, project and home studio applications. It has an output and level control for each set of headphones,

and a stereo input for connecting the program source.

Headphone Mixing Made Simple

The three basic requirements for professional headphone mixing are; (1) an output for each set of headphones, (2) a level control for

each set of headphones, and (3) a stereo input for connecting the program source (mixer, CD player, tape deck. etc.). But there may be

other requirements. (4) A second stereo source may need to be connected and mixed with the stereo program perhaps added

background tracks. (5) It may also be necessary to insert a specific audio source into a specific headphone channel possibly a vocalist

wants to hear himself or herself alone. (6) You may find it necessary to connect a number of mono sources rather than one or two

stereo sources and have some degree of control over their relative volumes perhaps the recordist or director needs to address

everyone. The trick is to make this headphone mixer compact and simple to use.

Specifications

• Input Impedance: 100K ohms

• Max Input Level: +18dBV

• Max Gain: 20dB per channel

• Max Output: 300mW per channel

• Frequency Response: 20-30kHz

• Signal- -to Noise: 90dB

• THD & IMD: <0.008%

• Power Requirements: 120VAC / 50-60Hz, or 240VAC / 50Hz, 15VA

• Dimensions: 19 inch x 1.75 inch x 6.0 inch (480mm x 44.5mm x 152mm)

• Weight: 5.5 lb. (2.5 kg)

Features

• Six headphone channels each with its own LEVEL control and headphone OUT jacks

• An INSERT jack for each channel to isolate it for specific input signals

• Single ¼”inch STEREO Input (front) or dual L + R ¼” inch inputs (rear)

• L and R AUXILIARY 1/4 inch inputs (rear) which can be mixed with the above

• PAN control (front) also regulates L/R relative input levels in mono mode

• MONO/STEREO push-button (front) adds versatility

• Power LED

• Single U rack-mount format

Usage:

a) Verify proper voltage selection on the IEC style power connector for your location. Connect the AC cord to a grounded AC outlet.

b) Connect the STEREO INPUT (front) to the source, or use two, shielded, mono (TS) cables to connect the L and R MAIN (rear) Inputs

to the source.

c) If needed, connect a second stereo source to the L and R AUX input jacks (rear) using two shielded, mono (TS) patch cables.

d) To connect a mono source, depress the MONO/STEREO button on the front panel of the 406, then connect the source to the L

(mono) MAIN or AUX Input.

e) It is possible to connect up to four mono sources with the 406 in MONO mode and the PAN control acts as a relative volume level

control between signals connected to the R inputs versus the L inputs. With the 406 in STEREO mode the PAN control regulates L/R

headphone balance as usual.

f) The INSERT jacks permit connecting a stereo source directly and exclusively to any headphone channel. Always plug a stereo (TRS)

¼” inch jack into these inputs so that sound can be present in both ears (these jacks are not affected by the Mono/Stereo button). When

these jacks are in use, the MAIN and AUXILLIARY L and R inputs are disconnected. Only the INSERT signal goes to that

corresponding OUT jack.

g) Connect stereo headphones to the OUT jacks on the front panel and adjust the LEVEL controls as desired. DO NOT plug a mono

jack into any OUT jack as this may damage the unit.

Produkt Specifikationer

Mærke:	ART
Kategori:	Hovedtelefonforstærker
Model:	406

Har du brug for hjælp?

Hvis du har brug for hjælp til ART 406 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hovedtelefonforstærker ART Manualer

ART HPFX Manual

4 August 2024

ART 406 Manual

3 August 2024

ART HeadAmp 4 Manual

21 Juli 2024

Hovedtelefonforstærker Manualer

Nyeste Hovedtelefonforstærker Manualer

Apogee Groove Manual

30 December 2025

Audio-Technica AT-HA40USB Manual

6 December 2024

Audio-Technica AT-PHA100 Manual

4 Oktober 2024

Shanling H2 Manual

5 September 2024

Fosi Audio SK02 Manual

4 September 2024

Fosi Audio T20 Manual

4 September 2024

Fosi Audio T20X Manual

4 September 2024

Fosi Audio DS1 Manual

4 September 2024

Fosi Audio Q5 Manual

4 September 2024

Fosi Audio N2 Manual

4 September 2024