Ashly ne24.24M Manual

Ashly Processor ne24.24M

Læs gratis den danske manual til Ashly ne24.24M (28 sider) i kategorien Processor. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Ashly ne24.24M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

ASHLY AUDIO INC.

847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010

Toll-Free: (800) 828-6308 Fax: (585) 872-0739

www.ashly.com

ne24.24M

24 Bit Digital

Multiple Channel

Matrix Processor

Operating Manual

Operating Manual - ne24.24M Matrix Processor

Important Safety Instructions

Consignes de sécurité à lire attentivement

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point

within an equilateral triangle is intended to alert the user to the presence of important operating

and maintenance instructions in the literature accompanying the device

Le symbole de la èche dans un triangle équilateral symbolisant la foudre est prévu pour sen-

sibiliser l’utilisateur à la présence de tension de voltage non isolée à l’intérieur de l’appareil.

Elle pourrait constituer un danger de risque de décharge électrique pour les utilisateurs. Le

point d’exclamation dans le triangle équilatérale alerte l’utilisateur de la présence de consignes

qu’il doit d’abord consulter avant d’utiliser l’appareil.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. To reduce the risk of re or electric shock, do not expose

this apparatus to rain or moisture.

6. Do not use this apparatus near water.

7. Clean only with dry cloth.

8. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

10. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

12. Only use attachments/accessories specied by the

manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

14. Unplug this apparatus during lightning storms or when

unused for long periods of time.

15. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been

dropped.

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Observez les avertissements.

4. Suivez ces instructions.

5. Pour réduire le risque de feu ou la décharge électrique,

ne pas exposer cet appareil pour pleuvoir ou l’humidité.

6. Ne pas utiliser l’appareil près de l’eau.

7. Le nettoyer à l’aide d’un tissus sec.

8. Ne pas bloquer les ouvertures de ventilation, installer

selon les consignes du fabricant.

9. Eloigner des sources de chaleur tel: radiateurs,

fourneaux ou autres appareils qui produisent de la

chaleur.

10. Ne pas modier ou amputer le système de la mise à

terre. Une prise avec mise à terre comprend deux lames

dont une plus large ainsi qu’une mise à terre: ne pas la

couper ou la modier. Si la prise murale n’accepte pas

la che, consulter un électricien pour qu’il remplace la

prise désuète.

11. Protéger le cordon de secteur contre tous bris ou

pincement qui pourraient l’endommager, soit à la che

murale ou à l’appareil.

12. N’employer que les accessoires recommandés par le

fabricant.

13. N’utiliser qu’avec les systèmes de xation,chariots,

trépied ou autres, approuvés par le fabricant ou vendus

avec l’appareil.

14. Débrancher l’appareil lors des orages électriques ou si

inutilisé pendant une longue période de temps.

15. Un entretient effectué par un centre de service accrédité

est exigé si l’appareil a été endommagé de quelque

façon: si il a été exposé à la pluie,, l’humidité ou s’il ne

fonctionne pas normalement ou qu’il a été échappé.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in both a commercial and residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.