Asus RP-AC51 Manual

Asus Wifi repeater RP-AC51

Læs gratis den danske manual til Asus RP-AC51 (2 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Asus RP-AC51, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RP-AC51

Wi-Fi AC Repeater

Quick

Start Guide

E12398 / First Edition / March 2017

LED explanations

POWER

On: RP-AC51 is power on.

Oﬀ: RP-AC51 is power oﬀ.

EXISTING NETWORK

On: Connected to the router/AP.

Oﬀ: Not connected to the

router/AP.

MOVE CLOSER

Need to move RP-AC51 closer

to the router/AP.

MOVE AWAY SLIGHTLY

Need to move RP-AC51 slightly

away from the router/AP.

Button explanations

POWER SWITCH

Switch this button on/oﬀ to turn

RP-AC51 on/oﬀ.

WPS BUTTON

Press this button to quickly

connect to the router/AP via the

WPS method.

RESET

BUTTON

Use a pin

to push this

button to reset

RP-AC51 to

its factory de-

fault settings.

Reset

BEFORE SETUP

around 2 meters

1 Place your RP-AC51 near your

router/AP.

2 Check the LEDs and see the

LED explanations. 1 Plug your RP-AC51 to a

power outlet.

2 Turn on the power switch.

Wait until the power LED turns blue,

indicating that your RP-AC51 is ready to

connect to your existing router/AP.

1 Press the WPS button on your

router/AP. 2 Press the WPS

button on your

RP-AC51 for

more than two (2)

seconds until the

power LED starts

to blink.

NOTE: Wait until the existing network LED blinks

for about two (2) minutes, then turns solid blue,

indicating the WPS process is completed.

Your RP-AC51’s wireless network name (SSID) changes to your existing Wi-Fi network name,

ending with or and shares your router/AP’s Wireless Password._RPT _RPT5G

1 Tap SET UP EXTENDER.

2 Open your phone Wi-Fi, and connect

to your RP-AC51’s SSID.

3 Follow the Quick Extender Setup instructions.

4 Assign a unique network name (SSID) for your extended

network.

5 Wait until the setup is completed.

SETUP METHODS

METHOD 1

METHOD 2

Download the app

01 Use the app

Connect via WPS

01 Enjoy Wi-Fi

Placing your RP-AC51

01 Power On

Disconnect your Ethernet (wired) connection from your computer.

Click the Wi-Fi icon on the taskbar and connect to RP-AC51’s

network: or .ASUS_RPAC51 ASUS_RPAC51_5G

NOTE: The screenshot below is from a desktop PC.

ASUS_RPAC51

ASUS_RPAC51_5G

1 On a web browser, enter . http://repeater.asus.com

2 Set a unique repeater login name and password.

3 Select the existing network you want to extend.

1 Tick Same with Parent AP SSID/Password to copy

the router/AP’s SSID and password for your extended

network. You could also set a unique SSID and pass-

word for your extended network by typing in the text

box. When done, click Apply.

AP MODE

Disconnect your Ethernet (wired) connection from your computer.

Click the Wi-Fi icon on the taskbar and connect to RP-AC51’s

network: or .ASUS_RPAC51 ASUS_RPAC51_5G

NOTE: The screenshot below is from a desktop PC.

ASUS_RPAC51

ASUS_RPAC51_5G

1 Enter your login account and password.

2 From your RP-AC51’s web interface, click Adminis-

tration Access Point mode, and select .

NOTE: You can also change to diﬀerent modes from this page.

1 Set up the network name (SSID) and click .Apply

2 After your RP-AC51 has rebooted, connect your RP-

AC51 and router/AP using an Ethernet cable.

After a successful setup

Place your RP-AC51 between your router/AP and wireless device to get the best performance.

NOTE: To minimize maintenance, keep your RP-AC51 away from devices such as cordless phones, Blue-

tooth devices, and microwave ovens.

IMPORTANT! We recommend that you place your RP-AC51 in open or spacious location.

Q3 Why is it that I cannot see the login page after entering http://repeater.asus.com in

the browser?

A: Ensure that your computer is connected to your RP-AC51 network only, and set your

computer to Obtain an IP address automatically. If you still cannot ﬁnd the login page, please

download the ASUS Device Discovery utility.

Q4 How do I reset RP-AC51?

A: Press the RESET button on the side of RP-AC51 for about two (2) seconds. Wait for

about ﬁve (5) seconds until the existing network LED blinks slowly.

MOVE CLOSER

Need to move RP-AC51 closer to the router/AP.

MOVE AWAY SLIGHTLY

Need to move RP-AC51 slightly away from the router/AP.

45°45°

RELOCATION

FAQ

Q1 What should I do if my router does not support WPS?

A: You can use Method One or Method Three to set up your RP-AC51.

Q2 Why is it that the LED indicator for the current network does not light up after the

Wi-Fi setup is complete?

A: You may have entered the wrong password for the router/AP. Please restart your RP-

AC51, enter the correct password, and try to set up your RP-AC51 again.

NOTE: Orient the two antennas at 45

o angle for the

best performance.

METHOD

Connect

01 Extend

02 Configure

Connect

01 Log in

02 Setup

Produkt Specifikationer

Mærke:	Asus
Kategori:	Wifi repeater
Model:	RP-AC51

Har du brug for hjælp?

Hvis du har brug for hjælp til Asus RP-AC51 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Wifi repeater Asus Manualer

Asus RP-AC51 Manual

22 Juli 2024

Asus EA-N66 Manual

20 Juli 2024

Asus RP-AC1900 Manual

28 Oktober 2023

Asus RP-AX56 Manual

1 Marts 2023

Asus USB-AX56 Manual

25 November 2022

Asus RP-AC52U Manual

13 November 2022

Wifi repeater Manualer

Nyeste Wifi repeater Manualer

Hikvision DS-3WF0BC-2NT Manual

27 Juli 2025

Hikvision DS-3WF0FC-2N Manual

27 Juli 2025

Hikvision DS-3WF0EC-5ACT Manual

27 Juli 2025

Hikvision DS-3WF0FA-2N Manual

27 Juli 2025

TRENDnet TI-E100 Manual

26 Juli 2025

Mercusys ME25BE Manual

25 Juli 2025

Netgear Nighthawk EXS27 Manual

24 Juli 2025

Gira 2572 00 Manual

22 Juli 2025

Dahua Technology PFT1500 Manual

20 Juli 2025

Netgear Orbi RBE870 Manual

17 Juli 2025