Atdec TH-1040-CT-B2B Manual

Atdec Ikke kategoriseret TH-1040-CT-B2B

Læs gratis den danske manual til Atdec TH-1040-CT-B2B (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Atdec TH-1040-CT-B2B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

! This product is to be installed in conjunction with TH-1040-CTS and TH-1040-CTL Ceiling Mounts only.

Component Checklist

Mount Head

Accessory

VESA Plate

TH-1040-CT-B2B

Back to Back Accessory for TH-1040-CTS and TH-1040-CTL

IMPORTANT INFORMATION:

Step 1. Check Components

Check you have received all parts against the Component Checklist and Hardware above.

Step 2. Remove Back of Existing Mount Head

Step 3. Install Mount Head Accessory

! IMPORTANT - Install 1040 Back to Back Accessory as per Installation Instructions.

Hardware

! The manufacturer accepts no responsibility for incorrect installation.

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 30.09.11 ©

Installation Complete

Fully installed TH-1040-CTS or

TH-1040-CTL (VESA Plate removed).

M4x16/25mm

(x4 each)

M5x16/25mm

(x4 each)

M6x16/30mm

(x4 each)

Refer to TH-1040-CTS/TH-1040-CTL Installation Instructions, Step 8. Attach VESA Plate to Display.

M4/5 Washer

(x4)

M4/5 Spacer (x4)

M6/8 Spacer (x4)

Security Screw

(optional)

Display

Mounting

Screws

5mm/3mm

Allen Keys

(x1 each)

NOTE: Phillips-head

screwdriver not supplied

5mm Allen Key

Socket Cap Screw

Back

REMOVE

Socket Cap

Screw

Use the 5mm

Allen Key supplied.

Keep Socket Cap Screws for Step 3.

Remove back half of the existing

Mount Head by removing

Socket Cap Screws (x2).

Socket Cap Screw

5mm Allen Key

Mount Head

Accessory

Socket Cap Screw

Attach the Mount Head

Accessory with

the Socket

Cap Screws (x2).

Tighten screws firmly

and .equally

Installation Instructions

Produkt Specifikationer

Mærke:	Atdec
Kategori:	Ikke kategoriseret
Model:	TH-1040-CT-B2B

Har du brug for hjælp?

Hvis du har brug for hjælp til Atdec TH-1040-CT-B2B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Atdec Manualer

Atdec AW-FB Manual

30 Januar 2025

Atdec AWM-AHX-S Manual

28 December 2024

Atdec AWM-HN Manual

7 December 2024

Atdec AD-TVAC-CM-B Manual

7 December 2024

Atdec AD-TVAC-CM-W Manual

7 December 2024

Atdec AWMS-NDB Manual

31 August 2024

Atdec AF-AN-P Manual

21 August 2024

Atdec AF-WD-P Manual

21 August 2024

Atdec TH-VWP-160 Manual

21 August 2024

Atdec AWM-HS Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

OmniMount POWER40 Manual

17 Juni 2025

OmniMount OL50FT Manual

17 Juni 2025

Intermatic FD30MHW Manual

17 Juni 2025

Toorx SRX-EVOLVE Manual

17 Juni 2025

OmniMount WorldMount 2N1-L Manual

17 Juni 2025

OmniMount WorldMount 4N1-L Manual

17 Juni 2025

Intermatic FD60MC Manual

17 Juni 2025

Microchip MPFS160TLS Manual

17 Juni 2025

Hughes & Kettner Metal Master Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16516310 Manual

17 Juni 2025