ATen UE250 Manual

ATen Kabler til pc'er og periferiudstyr UE250

Læs gratis den danske manual til ATen UE250 (2 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om ATen UE250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation

Installation is simply a matter of plugging in the cables:

1. Plug the UE-250 USB cable into the computer’s USB

port or a USB hub.

2. Plug the USB peripheral into the UE-250 socket.

That’s all there is to it.

Troubleshooting

Problem Cause Solution

Device

operates

erratically

Static electricity or

insufficient power

may cause the

device to operate

erratically.

Reset the device by

unplugging the cable and

then plugging it back in or

use external power to your

linked devices.

specifications

Function Specification

Power Supply Bus Powered

Cable length (output) 5 m (16ft.)

Connectors 1 Type A Male

1 Type A Female

USB Specification 2.0 spec. for high, full and low

Driver Support Native Driver Support

Operating Temperature 5° - 40° C

Storage Temperature -20° - 60° C

Humidity 0% - 80% RH, NC

Weight 255g

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED

THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed,

implied, or statutory with respect to the contents or use of this

documentation, and especially disclaims its quality, performance,

merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to revise or update the device or

documentation without obligation to notify any individual or entity of such

revisions, or update. For further inquiries, please contact your direct

vendor.

- 5 -- 4 -

User Manual

UE-250

Read this manual thoroughly and follow the installation and

operation procedures carefully to prevent any damage to the

unit, and/or any of the devices connected to it.

This package contains:

M1 UE-250 USB 2.0 Repeater Cable

M1 User Manual

If anything is damaged or missing, contact your dealer.

Manual Part No. PAPE-1240-100

Printed in Taiwan 10/2003

All brand names and trademarks are the registered property of their respective owners

Overview

The UE-250 USB Repeater Cable allows you to extend

the distance between your computer and your USB

peripherals by 5 meters (16’). Unlike typical cables, the

UE-250 is an active extension cable. All USB signals

transmitted through it are regenerated to maintain optimal

signal integrity to meet the USB 2.0 specification.

Features

MExtends the distance to USB devices by 5 m (16’)

MEmbedded custom ASIC regenerates transmitted USB

signals to maintain optimal signal integrity

System Requirements

MWhistler; Windows: XP, 2000, Me, 98 SE; Mac OS 8.6

or higher

Note: Only systems with a USB 2.0 driver installed

can support data transfer speeds of up to 480

Mbps; all others only support speeds of up to

12 Mbps.

MUSB 2.0 Host Controller installed on the system.

Note: The UE-250 can be connected to a USB 1.1

Host Controller, but in that case, it only

supports USB 1.1 speeds (1.5 - 12 Mbps).

Components

1. Built in cable with USB connection to USB port on PC

or hub

2. LED (green) indicates USB link

3. Type female USB port for connection from peripheralA

4. LED (red) indicates overcurrent

- 2 -- 1 - - 3 -

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device

pursuant to Subpart J of Part 15 of FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

MReorient or relocate the receiving antenna.

MIncrease the separation between the equipment

and receiver.

MConnect the equipment into an outlet on a circuit

different from that which the receiver is connected.

MConsult the dealer or an experienced

radio/television technician for help.

Produkt Specifikationer

Mærke:	ATen
Kategori:	Kabler til pc'er og periferiudstyr
Model:	UE250

Har du brug for hjælp?

Hvis du har brug for hjælp til ATen UE250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kabler til pc'er og periferiudstyr ATen Manualer

20 Februar 2025

1 Januar 2025

21 August 2024

21 August 2024

21 August 2024

19 August 2024

18 August 2024

18 August 2024

17 August 2024

17 August 2024

Kabler til pc'er og periferiudstyr Manualer

Nyeste Kabler til pc'er og periferiudstyr Manualer

Tripp Lite P580-015 Manual

3 April 2025

Wire Technologies CAB-Q-Q-100G-1M-WR Manual

2 April 2025

Wire Technologies SFP-10G-AOC-30M Manual

2 April 2025

Wire Technologies CAB-Q-Q-100G-0.5M-WR Manual

2 April 2025

Wire Technologies JNP-10G-AOC-3M-WR Manual

2 April 2025

Wire Technologies AOC-S-S-10G-10M-WR Manual

2 April 2025

Wire Technologies AOC-S-S-10G-7M-WR Manual

2 April 2025

I-Tec C31DP60HZP Manual

2 April 2025

Rocstor Y10A315-S1 Manual

1 April 2025

Lindy 38503 Manual

19 Marts 2025